On 1/28/12 3:00 PM, kxt-requ...@kxthelp.com wrote:
There are 30 different ring tones per line that you can select. Press
the prog soft key just under display. Press line key 2 times and
observe display. Press sel soft key. When done press store, exit.
Plan to do that, but present plans put 34
Hi Dear
I have problem with DID in TDA-200. I set the DID Number, DID Name and DID
Ring, but does not work. The TDA box has Caller ID.
Is anyone can help me
Best Regards
Hossein Khzooei
_
KX-T Mailing list --- ht
Lewis
The timer comes into play only when you are making a call (roh). It only
mutes the transmit side. Incoming is completely different. Sounds like
the ans machine is in parallel with the line. Whenever the second phone
(analog) connected to the same line goes off hook at the house the
volume
al Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Mark
Sent: Friday, January 19, 2007 8:02 PM
Cc: kxt@kxthelp.com
Subject: Re: KX-T: tda-50 transmit
I learn so much cool stuff on this list. Hopefully if I ever need the
info I'll be able to remember it.
- Mark
Ros
I learn so much cool stuff on this list. Hopefully if I ever need the
info I'll be able to remember it.
- Mark
Ross Lindahl wrote:
> What the switch is waiting for is a digit to be dialed. Go off hook and
> listen, your transmit is muted for 10 seconds or until you dial a digit.
> What would
What the switch is waiting for is a digit to be dialed. Go off hook and
listen, your transmit is muted for 10 seconds or until you dial a digit.
What would a customer bitch about anyway. They haven't even dialed a
number yet. If you are connecting an external door box (door king) you
want to ch
I just noticed on a new install of a KX-TDA-50 that talk battery on a CO
took about 6 seconds to kick in.You can hear fine, but not transmit for a
number
of seconds. It's not phone company. Any ideas before customer complains?
Thanks
___
Hi Guys,
Has anyone used the "ACCOUNT CODES" in TDA?
Steps I have taken.
1. Enabled Verify code.
2. In TRS Table entered Ristricted & Denied Numbers' Leading Digits
3. In Class Of Service Account Codes Option is FORCED.
Aftre doing this I have to enter
4 Digits
Yes, go into system options and program the DSS button to FLASH for incoming
calls.
Carmen
-Original Message-
From: [EMAIL PROTECTED]
To: kxt@kxthelp.com
Sent: Fri, 30 Dec 2005 19:17:40 EST
Subject: Re: KX-T: TDA BLF/DSS buttons
I replaced a KX-TD1232 with a TDA cabinet. The
] [mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Friday, December 30, 2005 4:18 PM
To: kxt@kxthelp.com
Subject: Re: KX-T: TDA BLF/DSS buttons
I replaced a KX-TD1232 with a TDA cabinet. The customer complaines that
before, she could look at any phone and tell if her phone was ringing
I replaced a KX-TD1232 with a TDA cabinet. The customer complaines that
before, she could look at any phone and tell if her phone was ringing by
looking
at her DSS button on the phones while she was out of her office. Now, the
led doesn"t lite until your off hook. (I personally think it'
gt; 667 yards= 2001 feet
>> 2000 feet = 24000 inches
>>
>> [EMAIL PROTECTED] wrote:
>>
>>
>>
>>
>>> How far is 600 meters?
>>> Carm
>>>
>>> -Original Message-
>>> From: N D
>>> To: kxt@kxthelp.c
ards= 2001 feet
>2000 feet = 24000 inches
>
>[EMAIL PROTECTED] wrote:
>
>
>
>>How far is 600 meters?
>>Carm
>>
>>-Original Message-----
>>From: N D
>>To: kxt@kxthelp.com
>>Sent: Mon, 22 Aug 2005 22:38:37 -0700 (PDT)
>>Subject:
is 600 meters?
>Carm
>
>-Original Message-
>From: N D
>To: kxt@kxthelp.com
>Sent: Mon, 22 Aug 2005 22:38:37 -0700 (PDT)
>Subject: KX-T: TDA Series DECT
>
>
>Dear All,
>
>What is the maximum area of coverage (Radius in Meters) that a TDA Series Cell
>Sta
t;[EMAIL PROTECTED]>;
>Sent: Tuesday, August 23, 2005 7:31 AM
>Subject: Re: KX-T: TDA Series DECT
>
>
>
>
>>How far is 600 meters?
>>
>>
>
>Twice as far as 300 meters.
>
>A meter is a
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>;
Sent: Tuesday, August 23, 2005 7:31 AM
Subject: Re: KX-T: TDA Series DECT
> How far is 600 meters?
Twice as far as 300 meters.
A meter is about 39.37 inches -- just over a yard.
Michael N.
600 meters?
>Carm
>
>-Original Message-
>From: N D <[EMAIL PROTECTED]>
>To: kxt@kxthelp.com
>Sent: Mon, 22 Aug 2005 22:38:37 -0700 (PDT)
>Subject: KX-T: TDA Series DECT
>
>
>Dear All,
>
>What is the maximum area of coverage (Radius in Meters) th
How far is 600 meters?
Carm
-Original Message-
From: N D <[EMAIL PROTECTED]>
To: kxt@kxthelp.com
Sent: Mon, 22 Aug 2005 22:38:37 -0700 (PDT)
Subject: KX-T: TDA Series DECT
Dear All,
What is the maximum area of coverage (Radius in Meters) that a TDA Series Cell
Stat
Dear All,
What is the maximum area of coverage (Radius in Meters) that a TDA Series Cell
StationsKX-TDA0141CEKX-TDA0142CEcan cover.
And what are the adavantages offered by TDA DECT over Kirk Solution.
And does the Kirk Base Station ACTUALLY Cover 600 Meters of Radius it is
claimed on t
Have a TDA200 with PRI. Everything is working. We are having problems with
dial plan though. We have 7 digit local and 10 digit metro numbers. Under
dial plan A which supports N11, NXX, 1NXXNXX we could not add metro
( 830 ) and get it to work but 7 digit dial went immediately. So tech
supp
Lindahl <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Cc: kxt@kxthelp.com
Sent: Tue, 31 May 2005 18:36:28 -0700
Subject: Re: KX-T: tda
Steve
I know where the page port is. What I should have said was I do not know
how to access the external page port through the system phones. Zone
paging throu
Steve
I know where the page port is. What I should have said was I do not know
how to access the external page port through the system phones. Zone
paging through the system is *3301 through *3316 for zones 1 to 16. The
td systems you dialed 33* to all call which included the external page
port
In a message dated 5/30/2005 11:12:47 PM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
External page port on the tda50
1 page port only, 1/8" mini plug, and the level is now adjustable, -15db to
+15db/ per 1db step. It's located on the right hand side of the cabiner just
below the
Folks
External page port on the tda50. I found the section with paging groups
but nothing about external paging. Can anone shed some light on the
situation. Thanx, Ross
_
KX-T Mailing list --- http://kxthelp.com/
Subscription chan
Tech support closed and I am on site any quick answers. My intercept to 165
is not happening. I have ICD group 300 with 101 immediate and 5 other
extensions ringing after 2 rings. Works great. Set intercept timer to 30 sec
does not happen. I have 165 set as intercept location for day, lunch, break
> If someone uses exec overide to barge in and the original
> extension justs hangs up (they always forget to press
> transfer) the call is dropped. On the TD this does not
> happen. Law offices use exec. overide often.
This is a HUGE pain in the *** in the TAW848, too. In a home it cause
Maybe you are right as most of our experience has been
with the TDA50 instead of the 100 or 200. Here are
some of the short comings we have found mostly with
the 50. Maybe we just are not as familiar with the
product so if anyone has ideas or workarounds
regarding these we would love to hear them
>Why doesn'nt the TDA have phantom extensions?
> We use them all the time.
When I first heard "no phantoms" in class, I thought "oh no...I use them all
the time!" Turns out ICD buttons take care of it.
The ICD groups do everything the phantoms did plus more... EXCEPT you are
limited in number t
Hello,
I'd like to know about the capabilities of the DISA
module. We need to have a multi-level autoattendant.
Can the DISA module do this ?
e.g.
" Welcome. Please dial 1 for sales or 2 for support "
Then if you press 2 :
" Please dial 1 for printers or 2 for photocopier support "
If the DIS
Hi Scott,
> THE WIRED PHONES ARE NOT FULL DUPLEX SPEAKERPHONES!
Strange, that's not what they told us at the class, but that was last year,
maybe they've updated their instructors by now.
I never bothered to test one myself.
Charles
(My customers will be surprised to find that it wasn't really
Suggest a new program file. Start it from scratch. I have had one case
wher I thot an 816 was possessed, but when I reprogrammed from scratch
rather than copy programs, all was okay
-
Hi all.
I have a TDA200 with approx. 45 "old" KX-T7531 phones and 10 KX-T7633 phones
( 2 DDS old model connect
Hi all.
I have a TDA200 with approx. 45 "old" KX-T7531 phones and 10 KX-T7633 phones
( 2 DDS old model connected to 2 new phones at operator´s desk), 8 analog
ext. and 1 TVP50 VoiceMail.
The problem is now that after 1 week in service the system begins to hang on
the digital ports, first starting
32 matches
Mail list logo
