Hello, Karl.
On Sat, Jan 25, 2025 at 09:00:12 +0100, k...@aspodata.se wrote:
> Alan Mackenzie:
> ...
> > Then I attempt to use alsamixer to unmute the speakers and, hopefully get
> > some sound out of them. This is where my problems start.
> > alsamixer displays just one
Hello, Dale.
On Fri, Jan 24, 2025 at 14:53:30 -0600, Dale wrote:
> Alan Mackenzie wrote:
> > Hello, Gentoo.
> > I've finally got around to buying a pair of new loadspeakers for my new
> > (as of 2024-08) PC. The experience has not been relaxed and obvious.
> >
..
Before I spend hours reading documentation, could some kind person
familiar with these things perhaps give me a tip to getting my speakers
working.
Setting up loudspeakers shouldn't be this difficult.
Thanks in advance for any help!
--
Alan Mackenzie (Nuremberg, Germany).
Hey, I'm having usability problems in applications as my CPU clock
frequency crashes down to about 530 mhz... I need it lock in a floor
frequency of 1.25 ghz... I used
cpupower frequency-set -d 1.25GHz which does lift it up to a usable
frequency but a day later it crashes down to garbage again.
Hello, Wol.
On Sun, Dec 22, 2024 at 16:53:17 +, Wols Lists wrote:
> On 22/12/2024 15:29, Peter Humphrey wrote:
> > On Sunday 22 December 2024 13:43:08 GMT Alan Mackenzie wrote:
> >> The trouble [is] that a kernel command line, or /etc/fstab, using lots
> >> of
> !!!), and the system will still find the correct disk.
The trouble being that a kernel command line, or /etc/fstab, using lots
of these is not human readable, and hence is at the edge of
unmaintainability. This maintenance difficulty surely outweighs the
rare situation where the physical->logical assignment changes due to a
broken drive. That's what we've got rescue disks for.
> Cheers,
> Wol
--
Alan Mackenzie (Nuremberg, Germany).
Hello again!
On Sat, Dec 21, 2024 at 16:58:59 +, Alan Mackenzie wrote:
> Hello, Karl.
> On Sat, Dec 21, 2024 at 17:45:13 +0100, k...@aspodata.se wrote:
> > Alan Mackenzie:
> > ...
> > > I've now got working code which assembles a metadata 1.2 RAID array at
>
I kinda botched the first --emptytree world I'm on my second now
and a clear pattern is emerging...
dev-cpp
│ └── abseil-cpp-20240722.0
That is causing cascade failures into protobuf, marble, opencv and
almost surely others.
The problem is that it was written in C++. In order to wri
Hello, Karl.
On Sat, Dec 21, 2024 at 17:45:13 +0100, k...@aspodata.se wrote:
> Alan Mackenzie:
> ...
> > I've now got working code which assembles a metadata 1.2 RAID array at
> > boot time. The syntax needed on the command line is, again,
> > md=124,1.2,
Hello again, Karl.
On Sat, Dec 21, 2024 at 12:43:50 +, Alan Mackenzie wrote:
> On Fri, Dec 20, 2024 at 23:02:58 +0100, k...@aspodata.se wrote:
> > Alan Mackenzie:
> > > On Fri, Dec 20, 2024 at 18:44:53 +0100, k...@aspodata.se wrote:
> > ...
> > > >
Hello, Karl.
On Fri, Dec 20, 2024 at 23:02:58 +0100, k...@aspodata.se wrote:
> Alan Mackenzie:
> > On Fri, Dec 20, 2024 at 18:44:53 +0100, k...@aspodata.se wrote:
> ...
> > > Please tell if you make booting with metadata 1.2 work.
> > > I havn't tested that.
&g
I'm trying to drag through a pass of emerge --emptytree world and I hit
a block of 50 failures, the only way to get through these is to
skipfirst through each one... I'm a gentoo user so therefore I'm a
massochist so I just have to sacrifice a few dozen hours with uparrow
-enter every few minut
Hello, Hoël.
On Fri, Dec 20, 2024 at 21:38:42 +0100, Hoël Bézier wrote:
> Am Fr, Dez 20, 2024 am 08:19:55 + schrieb Alan Mackenzie:
> >By the way, do you know an easy way for copying an entire filesystem,
> >such as the root system, but without copying other systems mounted in
Hello, Karl.
On Fri, Dec 20, 2024 at 18:44:53 +0100, k...@aspodata.se wrote:
> Alan Mackenzie:
> > On Fri, Dec 20, 2024 at 15:50:53 +0100, k...@aspodata.se wrote:
> ...
> > Because I didn't know about it. I found out about it this morning, and
> > immediately teste
Hey, does Ninja have scaling problems? I'm getting MANY failures when it
tries to build on 64 threads (BG BAWX).
--
You can't out-crazy a Democrat.
#EggCrisis #BlackWinter
White is the new Kulak.
Powers are not rights.
Hello, Karl.
On Fri, Dec 20, 2024 at 15:50:53 +0100, k...@aspodata.se wrote:
> Alan Mackenzie:
> ...
> > The cause was me booting up the machine with a rescue disk. This
> > assembled my RAID partitions /dev/md127 and /dev/md126 reversed, but
> > also wrote those wrong
ays have metadata version 0.90, the
(old fashioned) one that allows auto-assembly by the kernel without the
need of an initramfs.
The moral of the story: if your system uses software RAID, be careful
indeed before you boot up with a rescue disk.
--
Alan Mackenzie (Nuremberg, Germany).
Hello, Michael.
On Thu, Dec 19, 2024 at 10:59:54 +, Michael wrote:
> On Wednesday 18 December 2024 21:31:42 GMT Alan Mackenzie wrote:
> > On Wed, Dec 18, 2024 at 15:58:14 +, Michael wrote:
> > > On an OpenRC system without GRUB, rEFInd is a good choice, or for a
&g
Hello, Michael.
Thanks for the reply.
On Wed, Dec 18, 2024 at 15:58:14 +, Michael wrote:
> On Wednesday 18 December 2024 14:30:12 GMT Peter Humphrey wrote:
> > On Wednesday 18 December 2024 12:13:59 GMT Alan Mackenzie wrote:
> > > I've been havin
Hello, Arsen.
On Wed, Dec 18, 2024 at 13:50:09 +0100, Arsen Arsenović wrote:
> Hi Alan,
> Alan Mackenzie writes:
> > Hello, Gentoo.
> > I've been having fun with systemd-boot.
> > On my new (2024-08) machine, on Friday 2024-12-06, I suddenly noticed
> > t
eral kernels at booting time, but I certainly
don't want something "refined" like grub - I just need what I thought
systemd-boot actually was before yesterday.
Thanks in advance!
--
Alan Mackenzie (Nuremberg, Germany).
in
the patches, but if it breaks for you, I'll be sorry and will handle bug
reports. Nothing more.
--
Alan Mackenzie (Nuremberg, Germany).
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 8967c3a0d916..545ca051635a 100644
--- a/drivers/tty/vt/selection.c
+++ b/dr
Hello, Eli.
On Sat, Oct 26, 2024 at 21:53:15 -0400, Eli Schwartz wrote:
> On 10/25/24 3:22 PM, Alan Mackenzie wrote:
> >> Since it is "just a package", the solution should lie in fixing
> >> ::gentoo, not in fixing the "emerge" command. That's what th
Hello, Eli.
On Tue, Sep 24, 2024 at 15:36:43 -0400, Eli Schwartz wrote:
> On 9/24/24 2:53 PM, Alan Mackenzie wrote:
> >> Regarding the daemontools situation:
> >> """
> >> for example with --depclean preserving packages in system, as well as world
&g
Hello, Eli.
On Tue, Sep 24, 2024 at 11:15:10 -0400, Eli Schwartz wrote:
> On 9/24/24 7:30 AM, Alan Mackenzie wrote:
[ ]
> >> It's possible you have installed another one of these packages too. If
> >> you do, then virtual/service-manager will still be satisfied,
Hello, Eli.
On Tue, Sep 24, 2024 at 11:24:14 -0400, Eli Schwartz wrote:
> On 9/24/24 8:34 AM, Alan Mackenzie wrote:
> >>> The context of this discussion was an implication that the Gentoo
> >>> maintainers wouldn't make a change "that made everyone's sys
Hello, Arsen.
On Tue, Sep 24, 2024 at 13:40:57 +0200, Arsen Arsenović wrote:
> Alan Mackenzie writes:
[ ]
> >> So, @system requires you to have any one of:
> >> - openrc
> >> - openrc-navi (a testing fork with openrc user services)
> >> - s6
> &g
Hello, Eli.
On Mon, Sep 23, 2024 at 18:54:50 -0400, Eli Schwartz wrote:
> On 9/23/24 6:08 PM, Alan Mackenzie wrote:
> >> Do you have that little faith in the Gentoo Developers, that you think
> >> we'd make a USE flag change that made everyone's systems suddenly br
Hello, Eli.
On Mon, Sep 23, 2024 at 17:11:14 -0400, Eli Schwartz wrote:
> On 9/23/24 4:14 PM, Alan Mackenzie wrote:
> > Hello, Gentoo.
> > I got a nasty shock earlier on this evening when I was updating my
> > (still newish) system. Around (perhaps) 70 packages to be up
em about this change. :-(
--
Alan Mackenzie (Nuremberg, Germany).
Hello, everybody.
On Tue, Aug 27, 2024 at 20:50:01 +, Alan Mackenzie wrote:
> On Tue, Aug 27, 2024 at 19:36:49 +0100, Michael wrote:
> > On Tuesday, 27 August 2024 17:05:26 BST Alan Mackenzie wrote:
> > > On Mon, Aug 26, 2024 at 14:49:14 +, Alan Mackenzie wrote:
>
Hello, Michael.
On Tue, Aug 27, 2024 at 19:36:49 +0100, Michael wrote:
> On Tuesday, 27 August 2024 17:05:26 BST Alan Mackenzie wrote:
> > On Mon, Aug 26, 2024 at 14:49:14 +0000, Alan Mackenzie wrote:
> > > On Mon, Aug 26, 2024 at 12:54:20 +0100, Michael wrote:
> > >
Hello, everybody.
On Mon, Aug 26, 2024 at 14:49:14 +, Alan Mackenzie wrote:
> On Mon, Aug 26, 2024 at 12:54:20 +0100, Michael wrote:
> > On Monday, 26 August 2024 11:40:43 BST Alan Mackenzie wrote:
> > > On Sun, Aug 25, 2024 at 22:04:05 +0100, Michael wrote:
> I'm
Hello, Michael.
On Mon, Aug 26, 2024 at 12:54:20 +0100, Michael wrote:
> On Monday, 26 August 2024 11:40:43 BST Alan Mackenzie wrote:
> > Hello, Michael.
> > On Sun, Aug 25, 2024 at 22:04:05 +0100, Michael wrote:
> > I've had a reply from MSI's support. I
Hello, Michael.
On Sun, Aug 25, 2024 at 22:04:05 +0100, Michael wrote:
> On Sunday, 25 August 2024 20:37:37 BST Dale wrote:
> > Alan Mackenzie wrote:
[ ]
> > > I'm convinced this isn't a problem in Linux. It's something having got
> > > wedged in
Hello, Dale.
On Sun, Aug 25, 2024 at 14:37:37 -0500, Dale wrote:
> Alan Mackenzie wrote:
> > Hello, Dale
> > On Sun, Aug 25, 2024 at 13:28:14 -0500, Dale wrote:
> >> Alan Mackenzie wrote:
> >>> Somehow I don't think that will work (which doesn't mea
Hello, Dale
On Sun, Aug 25, 2024 at 13:28:14 -0500, Dale wrote:
> Alan Mackenzie wrote:
> > Somehow I don't think that will work (which doesn't mean I won't try it).
> > There is something in the motherboard which is throwing off the desired
> > resolution
Hello, Michael.
On Sun, Aug 25, 2024 at 16:31:54 +0100, Michael wrote:
> On Sunday, 25 August 2024 13:33:14 BST Alan Mackenzie wrote:
> > On Sat, Aug 24, 2024 at 20:36:11 +0000, Alan Mackenzie wrote:
> > > On Sat, Aug 24, 2024 at 16:40:38 +0100, Michael wrote:
> > > &g
Hello, Michael.
On Sat, Aug 24, 2024 at 20:36:11 +, Alan Mackenzie wrote:
> On Sat, Aug 24, 2024 at 16:40:38 +0100, Michael wrote:
> > On Saturday, 24 August 2024 14:25:31 BST Alan Mackenzie wrote:
> > > On Sat, Aug 24, 2024 at 10:44:44 +0100, Michael wrote:
[ ]
>
Hello again, Michael.
On Sat, Aug 24, 2024 at 16:40:38 +0100, Michael wrote:
> On Saturday, 24 August 2024 14:25:31 BST Alan Mackenzie wrote:
> > On Sat, Aug 24, 2024 at 10:44:44 +0100, Michael wrote:
> > > Instead of resetting the firmware and losing all your MoBo settin
Hello, Michael.
On Sat, Aug 24, 2024 at 10:44:44 +0100, Michael wrote:
> On Friday, 23 August 2024 17:21:42 BST Alan Mackenzie wrote:
> > On Thu, Aug 22, 2024 at 22:44:47 +0100, Michael wrote:
> > > Assuming the file is still available and built in the kernel as
> > >
Hello, Dale.
On Fri, Aug 23, 2024 at 13:44:36 -0500, Dale wrote:
> Jack wrote:
> > On 2024.08.23 12:21, Alan Mackenzie wrote:
> >> I'm a bit fed up with all of this. It's a new machine, but the
> >> motherboard, an MSI B650 Tomahawk Wifi, has been around a
Hello, Wol.
On Fri, Aug 23, 2024 at 10:42:54 +0100, Wol wrote:
> On 22/08/2024 17:37, Alan Mackenzie wrote:
> > Yes, 6.6.47 has become the new stable Gentoo kernel, and I've now
> > updated my old machine, and this worked without problem. This was
> > mainly to test
Hello, Grant.
On Wed, Aug 21, 2024 at 13:02:43 -, Grant Edwards wrote:
> On 2024-08-21, Alan Mackenzie wrote:
> > On Wed, Aug 21, 2024 at 00:30:25 -, Grant Edwards wrote:
> >> On 2024-08-20, Alan Mackenzie wrote:
> >> > I've just treated myself to a
Hello, Michael.
On Thu, Aug 22, 2024 at 22:44:47 +0100, Michael wrote:
> On Thursday, 22 August 2024 17:54:19 BST Alan Mackenzie wrote:
> > Hello, Gentoo.
> > Thanks to everybody who helped me get my video going in the other thread.
> > I've now got a more puzzling p
IOS has saved
the offsets in the CMOS or something. I don't know how to undo these
saved settings.
Would somebody please help me on this, too.
Thanks!
--
Alan Mackenzie (Nuremberg, Germany).
Hello, Michael.
On Thu, Aug 22, 2024 at 16:05:38 +0100, Michael wrote:
> On Thursday, 22 August 2024 15:46:41 BST Peter Humphrey wrote:
> > On Thursday, 22 August 2024 12:57:21 BST Alan Mackenzie wrote:
> > > Is there an easy way to persuade portage to download the ebuild for
&g
Hello, Peter.
On Wed, Aug 21, 2024 at 20:10:51 +0200, Peter Böhm wrote:
> Hello Alan,
> Am Mittwoch, 21. August 2024, 19:26:11 CEST schrieb Alan Mackenzie:
> > Nothing. No trace of anything on my blank screen. I hate it when
> > people say that configuring a kernel is easy
Hello, Peter.
On Wed, Aug 21, 2024 at 14:03:10 +0200, Peter Böhm wrote:
> Hello Alan,
> Am Mittwoch, 21. August 2024, 13:15:22 CEST schrieben Sie:
> > > Boot with our GentooLiveCD (*) and ask:
> > > "dmesg | grep firmware"
> > I've done that, a
Hello, Michael.
On Wed, Aug 21, 2024 at 12:37:53 +0100, Michael wrote:
> On Wednesday, 21 August 2024 12:15:22 BST Alan Mackenzie wrote:
> > Hello, Peter.
> > On Tue, Aug 20, 2024 at 23:16:39 +0200, Peter Böhm wrote:
> > > Hello Alan,
> > > > Anyhow, I&
Hello, Grant.
On Wed, Aug 21, 2024 at 00:30:25 -, Grant Edwards wrote:
> On 2024-08-20, Alan Mackenzie wrote:
> > I've just treated myself to a new machine based on a Ryzen 9 7900
> > processor. I chose the second newest generation so as not to get caught
> > o
Hello, Peter.
On Tue, Aug 20, 2024 at 23:16:39 +0200, Peter Böhm wrote:
> Hello Alan,
> > Anyhow, I'm up to the stage of configuring the kernel, and I'm stuck at
> > the bit where I need to specify the firmware to be incorporated into the
> > kernel for the integr
Hello, Wol.
On Wed, Aug 21, 2024 at 11:32:18 +0100, Wol wrote:
> On 20/08/2024 22:16, Peter Böhm wrote:
> > Hello Alan,
> >> Anyhow, I'm up to the stage of configuring the kernel, and I'm stuck at
> >> the bit where I need to specify the firmware to be inco
t
all; maybe it's already fully contained in the processor. That's how
good the doc is, after ~3 hours searching the web.
So, rant mode off! Would a Gentoo expert please tell me where I can
discover whether I need such firmware, and if so what.
Many thanks in advance!
--
Alan Mackenzie (Nuremberg, Germany).
I'm still using seamonkey as my e-mail as I have been doing with it and
its predecessors since 1998
I am using the symlink trick to exploit the magic of dynamic linking to
get the stale build of seamonkey to run against the updated library. I
would like it to be able to build again at some
Hello, Alan.
On Wed, Aug 14, 2024 at 16:08:39 -0400, Alan Grimes wrote:
> Because my system was booting reliably, the penguins decided it was time
> to jack around with the bootup code. Kernel 6.9 panics on boot because
> the way the root partition is configured changed utterly...
Because my system was booting reliably, the penguins decided it was time
to jack around with the bootup code. Kernel 6.9 panics on boot because
the way the root partition is configured changed utterly... When I
installed my new machine, the bootup changed to some crazy initramfs bs
crap that I
Hello, Wol.
On Tue, Aug 06, 2024 at 23:08:42 +0100, Wol wrote:
> On 06/08/2024 19:31, Alan Mackenzie wrote:
> > So, is it possible in Wayland to record a configuration of windows,
> > their sizes and positions, then restore these on starting a program
> > again? If not, that
n Wayland to record a configuration of windows,
their sizes and positions, then restore these on starting a program
again? If not, that would appear to be a design bug in Wayland. What
am I missing?
[ ]
> have a lovely day
> --
> Arsen Arsenović
--
Alan Mackenzie (Nuremberg, Germany).
Because I did everything precisely the same as I did last time I updated
my kernel, nothing worked. =|
Basically the old .config is coppied to the new kernel, and I run it
with "make -j 60 ; make install modules_install "
Now there are config changes, I just took the default on all changed
o
I had updated my machine, rebooted, keyboard started working, thought
would never see the problem again...
Had a power failure, came back on line, keyboard broken,
power went down again, came back on line, keyboard broken.
also X windows won't start my right hand monitor, workaround is to
man
Hello, Wol.
On Mon, Jun 17, 2024 at 13:39:35 +0100, Wols Lists wrote:
> On 17/06/2024 12:17, Alan Mackenzie wrote:
> > Sadly, the FBR never made it into commercial deployment.
> Was that the one with the heavy water moderator? So a thermal runaway
> was impossible becaus
aneous users. The response time
wasn't always what one might have desired, and neither was the
robustness of the operating system.
Sadly, the FBR never made it into commercial deployment.
> --
> Regards,
> Peter.
--
Alan Mackenzie (Nuremberg, Germany).
Hello, Vitaliy.
On Fri, Jun 14, 2024 at 21:25:23 +0300, Vitaliy Perekhovy wrote:
> On Fri, Jun 14, 2024 at 03:53:35PM +0000, Alan Mackenzie wrote:
> > I think portage is at fault here - it should retain the older standard
> > version of /etc/bash/bashrc so that users can resolve
Hello, Netfab.
On Fri, Jun 14, 2024 at 19:52:32 +0200, netfab wrote:
> Le 14/06/24 à 19:33, Alan Mackenzie a tapoté :
> > Are these files freely available, anywhere, perhaps?
> Else, everything is also available from gentoo.org :
>
> https://gitweb.gentoo.org/repo/g
Lets go back to square 1.
The keyboard is the most fundamental device ever, it was invented about
80 years before anyone figured out how to connect it to a computer,
before the computer even existed actually
The fundamental AT 101 keyboard, or microsoft's gay variant the PC-104,
and the
A number of my softwarez requires the use of the arrow keys and can't
use the numpad in edit mode to work around it. So who do I need to kill
to get arrow keys to work in x11 again?
--
You can't out-crazy a Democrat.
#EggCrisis #BlackWinter
White is the new Kulak.
Powers are not rights.
Hello, Mike.
On Fri, Jun 14, 2024 at 17:19:31 +0100, Mike Civil wrote:
> On 14/06/2024 17:00, Alan Mackenzie wrote:
> > Right now, I have a problem. Is there any convenient way I can get the
> > older standard file contents back again, so as to be able to do this
> > 3-
Hello, Netfab.
On Fri, Jun 14, 2024 at 18:22:11 +0200, netfab wrote:
> Le 14/06/24 à 17:53, Alan Mackenzie a tapoté :
> > Right now, I have a problem. Is there any convenient way I can get
> > the older standard file contents back again, so as to be able to do
> > this 3
nt way I can get the
older standard file contents back again, so as to be able to do this
3-way diff?
Or any other suggestions?
Thanks!
--
Alan Mackenzie (Nuremberg, Germany).
The standard control keys aren't working in X anymore, mainly the arrow
keys and normal edit buttons, workaround is to use the numpad. Keys are
functional as tested from normal linux console. Problem started when I
rebooted after the emptytree world build the other day due to the stupid
profil
I'm trying to do the steps for the forced profile update even though
things had been working perfectly
Emerge has been doing really crazy things recently.
It will start emerging a thousand packages but not install a single one
of them.
Then it crashes with a bunch of python garbage
Dale wrote:
The one I'm not sure about is the PCIe one which may break apart to fit
different connectors. I seem to recall that goes to a video card on
systems with those expensive and power hungry video cards. Since this
mobo has built in video, is that the right thing?
DUDE!!!
You are bu
Every few minutes my motorized cupholder kicks its motor... Which means
**something** is kicking /dev/sr0 every few minutes checking for
media... I need to know what it is and how to stop it... =\
--
You can't out-crazy a Democrat.
#EggCrisis #BlackWinter
White is the new Kulak.
Powers are not
ngle problem with my two Samsung SSD 960 EVO 500GB
drives in these 7 years.
[ ]
> Dale
> :-) :-)
> P. S. I reported the memory error to Newegg, where it claims 256GB.
:-)
--
Alan Mackenzie (Nuremberg, Germany).
hine? In particular, to reduce the noise it gives
off while building large packages such as clang and rust? Or is water
cooling only sensible for really heavy users such as gamers?
Thanks for the upcoming answers!
--
Alan Mackenzie (Nuremberg, Germany).
0n1p2): Can't find a valid FAT filesystem
.. On diffing the 6.7 and 6.8 .config files, I found a new pertinent
item
[*] Block layer debugging information in debugfs
.. When I disabled this and rebuilt the kernel, my /boot mounted without
problem.
--
Alan Mackenzie (Nuremberg, Germany).
Hello, Peter.
On Mon, Mar 11, 2024 at 10:47:43 +, Peter Humphrey wrote:
> On Wednesday, 24 January 2024 12:20:29 GMT Alan Mackenzie wrote:
> > Hello, Gentoo.
> > On Wed, Jan 24, 2024 at 10:00:37 +, Alan Mackenzie wrote:
> > [ ]
> > Please note the co
4-04-01 15:12, Alan Mackenzie wrote:
> > Hello, Gentoo.
> > I'm trying to do
> > # emerge -a @preserved-rebuild
> > .. For this purpose, I created a temporary repository, filling it with
> > ancient ebuilds recovered from /var/db/pkg.
> >
Hello, Arsen.
Sorry it's taken me so long to reply. Just after I first posted, I
updated my system, with which libssl-1.1.1w got unmerged. So my qmail
stopped working. I've now reinstalled and configured it.
On Mon, Apr 01, 2024 at 17:48:18 +0200, Arsen Arsenović wrote:
> Hi
April 2024 16:12:51 BST Alan Mackenzie wrote:
> > Hello, Gentoo.
> >
> > I'm trying to do
> >
> > # emerge -a @preserved-rebuild
> >
> > .. For this purpose, I created a temporary repository, filling it with
> > ancient ebuilds recovere
-). So I'm back in action.
Thanks very much!
--
Alan Mackenzie (Nuremberg, Germany).
the pending profile update? I appear to be stuck. I hope I won't have
to reinstall gentoo.
--
Alan Mackenzie (Nuremberg, Germany).
Hello, Bill.
On Sun, Feb 11, 2024 at 10:14:49 +0800, William Kenworthy wrote:
> On 10/2/24 23:56, Alan Mackenzie wrote:
> > I was wanting to do a pretty full build of my Emacs working repository.
> > This involved first purging al *.elc files. The way to do this is
> >
27;t I? ;-( At least I do a weekly backup,
though.
So, in the end I managed to recover fairly well, thankfully.
--
Alan Mackenzie (Nuremberg, Germany).
k...@aspodata.se wrote:
>> Absolutely suprimo HP laser jet network printer.
You didn't write what model, hard to help you then.
It's a LaserJet Pro M453-4.
When I was shopping for it, there was a $350 model with wireless, and a
$450 model without wireless, I was like OMG, i DON'T HAVE TO WORR
I spent $450 for the most beautifulest printer ever made. Absolutely
suprimo HP laser jet network printer.
I even have a test page from linux to prove that it did work, once...
After going through unholy hell, with help from this list, I got it to
print a second time. Naturally, when I went ba
Don't bother, printing always stops working the day after you get it set
up on linux. It's easier to ssh int your linux machine from your windows
machine and then print than it is to get linux to print in any useful
way. =|
Thelma wrote:
On 1/28/24 11:46, Michael wrote:
On Sunday, 28 Janua
lkernel ?
I had to change the use flags
sys-kernel/installkernel-dracut -systemd
With "dracut", it now ran dracut automatically, duplicating my install
script.
With "systemd", it installed the new kernel in a subdirectory of
Hello, Gentoo.
On Wed, Jan 24, 2024 at 10:00:37 +, Alan Mackenzie wrote:
[ ]
Please note the corrected subject line. This version of the soft
scrolling patch is for kernel 6.6.13, or thereabouts.
--
Alan Mackenzie (Nuremberg, Germany).
Hello, Gentoo.
[ First an older post, but without quoting >s on the lines. ]
On Fri, Feb 03, 2023 at 18:56:27 +0000, Alan Mackenzie wrote:
The topic of this post is my kernel patch which enables soft scrolling
on Linux tty's with and , and also enables
the GPM mouse utility on those
seamlessly interact with MTP
device files."
--
Alan J. Wylie https://www.wylie.me.uk/
Dance like no-one's watching. / Encrypt like everyone is.
Security is inversely proportional to convenience
m/Cyp/simple-mtpfs.git> but the Gentoo
version is currently the same as that on github last time I pulled.
[as root]
simple-mtpfs --device 1 -o allow_other,ro /mnt/phone
[as normal user, copy]
rsync ...
[again, as root]
fusermount -u /mnt/phone
--
Alan J. Wylie
I chroot, env-update hangs for
> ever.
> Well, over an hour anyway.
>
> Is it possible to export /var in this way? I can't see anything else wrong.
>
Did you run mount inside the chroot or outside of it?
--
Alan McKinnon
alan dot mckinnon at gmail dot com
On Mon, Nov 13, 2023 at 3:09 PM Mart Raudsepp wrote:
> On Wed, 2023-11-08 at 19:08 +, Neil Bothwick wrote:
> > On Wed, 8 Nov 2023 16:17:19 +0200, Alan McKinnon wrote:
> >
> > > On Wed, Nov 8, 2023 at 4:10 PM Neil Bothwick
> > > wrote:
> > >
> &g
96 184 /tmp/#184 (deleted)
So here I have one. To release the 1 file, kill the process holding it open
Alan
--
Alan McKinnon
alan dot mckinnon at gmail dot com
There is a new item about this:
https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
I did not read or act on any of the unread news articles, leaving it for
later
If only...
On Mon, Nov 6, 2023 at 8:46 PM Alan McKinnon
wrote:
>
>
> On Mon, Nov 6, 2023 at 7:35 P
On Mon, Nov 6, 2023 at 7:35 PM Michael wrote:
> On Monday, 6 November 2023 17:26:45 GMT Alan McKinnon wrote:
> > On Mon, Nov 6, 2023 at 6:56 PM Michael wrote:
> > > On Monday, 6 November 2023 16:16:50 GMT Alan McKinnon wrote:
>
> > > > At this point I see the
On Mon, Nov 6, 2023 at 6:56 PM Michael wrote:
> On Monday, 6 November 2023 16:16:50 GMT Alan McKinnon wrote:
> > Hi,
> >
> > New install here, recent .isos:
> > install-amd64-minimal-20230806T163139Z.iso
> > stage3-amd64-systemd-20230806T163139Z.tar.
inotify lame lapack libcaca lm-sensors lua lz4 lzma lzo magic matroska
# modules mplayer mtp musicbrainz offensive rar rdp slang smp snmp szip
# vdpau vim-syntax webkit xcomposite zip
# -cdrom -gtk -sdl -semantic-desktop"
VIDEO_CARDS="intel"
==
And so, in the words of the wise man, WTF?
--
Alan McKinnon
alan dot mckinnon at gmail dot com
1 - 100 of 7683 matches
Mail list logo
