Re: Stus-List Insurance issues

Staying with BoatUS too. Got a few other quotes and was not impressed especially as I have $0 deductible now. I have heard all good things when the you-know-what hits the fan and you have to file a claim. And. Just called them to add our 9' restored Dyer sail Dink. She made a note and t

Re: Stus-List Sail Changeover for 29 Mk1

Do you really need a 155%? Think of prevailing wind speeds, use, crew and PIA factor (changing headsails is not always fun)... David F. Risch (401) 419-4650 (cell) From: CnC-List on behalf of Jim Giffing via CnC-List Sent: Wednesday, February 7, 2018 11

Re: Stus-List Exterior Teak

So those using Cetol and putting gloss as the last two coats. Is that for looks? Hardness? Both? Thanks in advance. David F. Risch (401) 419-4650 (cell) From: CnC-List on behalf of Dennis C. via CnC-List Sent: Wednesday, February 7, 2018 2:18 PM To

Re: Stus-List Restarting Thread - Insurance: SHAME on Boat U.S./Geico!

Yup...apparently BoatUS lost their shirt after the last round of hurricanes...boats over-insured etc. David F. Risch (401) 419-4650 (cell) From: CnC-List on behalf of John Christopher via CnC-List Sent: Friday, February 9, 2018 11:56 AM To: Joel Aronson Cc

Re: Stus-List Short Cruise!

do not take the time to gain some experience first. David F. Risch 1981 40-2 (401) 419-4650 (cell) From: CnC-List on behalf of Bruce Whitmore via CnC-List Sent: Monday, February 12, 2018 8:01 AM To: cnc-list@cnc-list.com Cc: Bruce Whitmore Subject: Re

Stus-List Cetol...not just for teak

So...after stripping (man-many hours) off many years of bad varnish from the Dyer Dow's wood bits I applied 5 coats of Cetol Lite (left over from the mother ship) on the fresh mahogany seats and spars. The results were some-what orangy but not bad.I thought the orangy-ness was from putting

Stus-List Cetol Clear...

Sanded wood smooth. Added 3 coats of Cetol Teak. Surfaced roughed up a bit as no sanding between coats. I want to add 3 coats of Cetol clear and was told by their tech that is self leveling and surface will become smooth. I am so tired of sanding, but I would rather know now if I should sa

Re: Stus-List Cetol Clear...

unevenness. But you can’t see it unless you’re down there looking with a magnifying glass. That was good enough for me. Cheers, Randy Stafford S/V Grenadine C&C 30-1 #7 Ken Caryl, CO On Feb 28, 2018, at 9:24 AM, David via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Sanded wood smo

Re: Stus-List [EXTERNAL] Re: selling boats

Interesting...in the New England area i have not seen many, if any, derelict boats. Ugly boats, yes. Not very ship-shape boats, yes. Must be the cost of living... Get Outlook for Android From: CnC-List on behalf of Jack Fitzgerald via

Re: Stus-List Tuff little sailboat

Tough little S2very impressive. David F. Risch (401) 419-4650 (cell) From: CnC-List on behalf of Dreuge via CnC-List Sent: Tuesday, March 6, 2018 4:31 PM To: cnc-list@cnc-list.com Cc: Dreuge Subject: Stus-List Tuff little sailboat Sailboat on the

Re: Stus-List CnC List problems...

Got it... David F. Risch Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Robert Boyer via CnC-List Sent: Wednesday, March 21, 2018 2:13 PM To: cnc-list@cnc-list.com Cc: Robert Boyer Subject: Stus-List CnC List problems... Hello List

Re: Stus-List hydraulic backstay

Bring it a hydraulic shop that fixes trucks. Much much cheaper than a navico shop Get Outlook for Android From: CnC-List on behalf of Dan via CnC-List Sent: Wednesday, March 21, 2018 11:18:15 PM To: cnc-list@cnc-list.com Cc: Dan Subject

Re: Stus-List SHARX™ SCREWS FOR MARINE USE

Danny, Call me after the salon and before you jump on the mustang. I'll join you for poker and whiskey... How is paint-job-parte-deux going? From: CnC-List on behalf of Danny Haughey via CnC-List Sent: Monday, April 2, 2018 10:41 AM To: cnc-list@cnc-li

Re: Stus-List Partnership buyout - without an agreement

Therein lies the rub...what is fair market value? In today's market you really don't know until you get the reality check of "Well I think its worth $X" at 12 months later not sold or it is sold for a percentage of $X... David F. Risch Gulf Stream Associates,

Re: Stus-List EPIRB testing and registration

...and re-register it. David F. Risch Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Mike via CnC-List Sent: Wednesday, April 11, 2018 5:05 PM To: cnc-list@cnc-list.com Cc: Mike Subject: Re: Stus-List EPIRB testing and registration

Re: Stus-List Wax

And its what Awlgrip recommends as well... David F. Risch Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Andrew Burton via CnC-List Sent: Friday, April 20, 2018 4:42 PM To: cnc-list@cnc-list.com Cc: Andrew Burton Subject: Re: Stus

Re: Stus-List Wax

Awlgrip is very specific. Awlwash, Awlcare and Finesse. Never let me sown on a flag blue hull. 1981 40-2 Get Outlook for Android<https://aka.ms/ghei36> From: Schiller Sent: Friday, April 20, 2018 7:34:35 PM To: cnc-list@cnc-list.com Cc: David Subje

Re: Stus-List Wax

David, My flag blue transom on my 40 is pretty bad too. After good luck with repainting the boot stripe and my Dyer Dhow I decided to strip the transom and DIY repaint with Awlgrip. Apparently Awlgrip is roller/brush friendly. I will let you know how it turns out. David F. Risch Gulf

Re: Stus-List Wax

aggressive that what 3M's Finesse can provide. Something about a very narrow window of buffing success and most likely melting the paint. Anyway my transom is well beyond that and is now stripped and sanded ready for final prep and a weather window. David F. Risch Gulf Stream Associates, LLC

Re: Stus-List Wax

Well seeing as we board Corsair via the transom ladder quite often from the dinghy...not sure if that is an argument for or against! David F. Risch Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Danny Haughey via CnC-List Sent

Re: Stus-List Wax; now repaint (and thin no more)

Jim...interesting. Where did you get the vinyl? David F. Risch Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of detroito91 via CnC-List Sent: Wednesday, April 25, 2018 12:23 PM To: cnc-list@cnc-list.com Cc: detroito91 Subject: Re

Re: Stus-List Fresh Water Conversion Yanmar 3HM

Chuck, My 3QM 30 is a Sendur cooled set-up like yours and I never had a issue with conventional impellers in the circulation pump... David F. Risch Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Chuck Gilchrest via CnC-List Sent

Re: Stus-List LED Indirect Cabin Lighting

Gary, It wasn't me but what brand were those again? Thanks. David F. Risch Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Gary Russell via CnC-List Sent: Thursday, May 3, 2018 8:34 AM To: C&C List Cc: Gary Russell Subj

Re: Stus-List tri-color masthead light

Tri colors primary purpose is for offshore use. When coastal their height limits their usefulness. People are looking around the horizon for lights not 30 to 60 feet in the air when coastal. Never have tricolor on and deck running lights on at the same time. Nor have a tricolor on and steaming l

Stus-List Gold Stripe...

Replacing the gold stripe on hull beneath toerail. Any suggestions for a vendor for a quality product? Thanks in advance. David F. Risch Gulf Stream Associates, LLC (401) 419-4650 ___ Thanks everyone for supporting this list with your

Re: Stus-List Gold Stripe...

Thanks. Wrong stripe. Its a single. Get Outlook for Android<https://aka.ms/ghei36> From: Ken Heaton Sent: Sunday, May 13, 2018 11:03:07 AM To: cnc-list Cc: David Subject: Re: Stus-List Gold Stripe... Holland Marine: http://www.hollandmarine.com/ ALL

Re: Stus-List Gold Stripe...

Perfect Dennis...you da Man! Thanks. David F. Risch Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Dennis C. via CnC-List Sent: Sunday, May 13, 2018 1:34 PM To: CnClist Cc: Dennis C. Subject: Re: Stus-List Gold Stripe... Highly

Re: Stus-List Time for new halyard... Recommendations?

Not for nuthin' but perhaps we support our brethren. Let Chuck make a recommendation and buy from him... Get Outlook for Android From: CnC-List on behalf of Josh Muckley via CnC-List Sent: Monday, May 14, 2018 12:45:46 PM To: cnc-list@c

Stus-List Chart Light

Free (pay shipping) or donation to Stu. [Image] David F. Risch Gulf Stream Associates, LLC (401) 419-4650 [https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaig

Stus-List Decals

ed in the decals? David F. Risch Gulf Stream Associates, LLC (401) 419-4650 ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contrib

Re: Stus-List sprucing up Polyurethane Paint

If its Awlgrip...Andrew is correct. Awlwash, Finesse, Awlwash then Awlcare. Anything else at your own risk. Awlgrip is very unforgiving. >From my Android... From: CnC-List on behalf of Dennis C. via CnC-List Sent: Tuesday, May 29, 2018 4:32:30 PM To: CnC

Re: Stus-List thermostat on 3QM30H, Not thermostats

16 years, 3QM30 with a Sendure and one thermostat. No problems. >From my Android... From: CnC-List on behalf of William Walker via CnC-List Sent: Tuesday, May 29, 2018 4:04:12 PM To: cnc-list@cnc-list.com Cc: wwadjo...@aol.com Subject: Re: Stus-List thermosta

Stus-List Wood Bulkheads...

So my forward cabin bulkheads are not looking great. Used vinegar and water to clean and tried a recommended restorative product and it turned the worst part black. WTF. I assume I can sand it but I also think it is a thin veneer. Any experience? Thanks in advance. David F. Risch, J

Re: Stus-List Rudder play fix on c&c 40 1983 aft cabin

better method on this list. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of PETE via CnC-List Sent: Sunday, June 3, 2018 7:49 PM To: cnc-list@cnc-list.com Cc: PETE Subject: Stus-List Rudder play fix on c&

Re: Stus-List Rudder play fix on c&c 40 1983 aft cabin

My sleeve was the whole length and I drilled out the whole length and replaced the whole sleeve. Leaving it for local coastal sailing...? Well its out so maybe give it a go now? Call me today and if no better answer I will detail mine out. David F. Risch, J. D. Gulf Stream Associates

Re: Stus-List C&C 2018 Northeast Rendezvous -- September 7-8 -- New Survey

Not so fast...making some in-roads on breaking up the "happy" couple. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Edd Schillay via CnC-List Sent: Monday, June 4, 2018 3:28 PM To: cnc-list@cnc-l

Re: Stus-List Below deck auto pilot installation for C&C 40

Don, I will try and take pics for you over the next eek or so...what year is your 40? David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Don Marlin via CnC-List Sent: Wednesday, June 6, 2018 11:34 AM To: cnc-list

Re: Stus-List Below deck auto pilot installation for C&C 40

Dave...call my cell to discuss. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Dave Godwin via CnC-List Sent: Wednesday, June 6, 2018 11:50 AM To: cnc-list@cnc-list.com Cc: Dave Godwin; Don Marlin Subject: Re

Re: Stus-List ​Re: Below deck auto pilot installation for C&C 40 (David)

My 40 (not the aft cabin) has the drive installed upside down and bolted to the cockpit floor. I would think there would be enough space for the tiller arm as mine has one installed. The aft cabin model should not be that much different back there...but perhaps they are. David F. Risch, J

Re: Stus-List ​Re: Below deck auto pilot installation for C&C 40 (David)

Is your quadrant an Edson radial wheel? From my Android... From: CnC-List on behalf of David via CnC-List Sent: Wednesday, June 6, 2018 1:51:13 PM To: cnc-list@cnc-list.com Cc: David Subject: Re: Stus-List ​Re: Below deck auto pilot installation for C&

Re: Stus-List Best way to clean Ram-mic connector pins?

And as a some-what related aside. Turn off VHF before removing RAM-Mic. Blows the RAM Mic. Don't ask me how I know (x 2)... David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Josh Muckley via CnC-List

Re: Stus-List C&C34 Water tank hatch covers

I think I have a few extra you can have for free let me check Get Outlook for Android From: CnC-List on behalf of detroito91 via CnC-List Sent: Monday, June 18, 2018 10:39:36 AM To: cnc-list@cnc-list.com Cc: detroito91 Subject: Re: Stus-List C&C34 Water tank ha

Re: Stus-List marine insurance

I. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Nathan Post via CnC-List Sent: Tuesday, June 19, 2018 11:34 AM To: cnc-list@cnc-list.com Cc: Nathan Post Subject: Re: Stus-List marine insurance I just got a

Re: Stus-List marine insurance

Kevin Malloy 339 933 0666 David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Nathan Post via CnC-List Sent: Tuesday, June 19, 2018 1:02 PM To: cnc-list@cnc-list.com Cc: Nathan Post Subject: Re: Stus-List marine

Re: Stus-List Touche' hydraulic backstay adjuster repair

I too went to Navtech to rebuild my backstage years ago it was fine for one season. We launch the boat the next season and it was leaking. I took it back expecting warranty service. Nope. Another 500 bucks and it was leaking within a year. Went to hydraulic truck shop a hundred bucks later it's

Re: Stus-List Steaming light guard

Had it for 15 years on my 40...should be fine Get Outlook for Android From: CnC-List on behalf of Rick Brass via CnC-List Sent: Thursday, June 28, 2018 9:13:21 PM To: cnc-list@cnc-list.com Cc: Rick Brass Subject: Re: Stus-List Steaming light guard I put one of

Re: Stus-List Amazing USCG rescue - Anybody else see this?

below decks. Get Outlook for Android From: CnC-List on behalf of David Miles via CnC-List Sent: Friday, June 29, 2018 9:41:11 PM To: cnc-list@cnc-list.com Cc: David Miles Subject: Re: Stus-List Amazing USCG rescue - Anybody else see this? I have no idea on

Stus-List Fw: Landfall 38 - OSR compliance ?

Contact US Sailing. They probably have data. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of john sandford via CnC-List Sent: Thursday, July 5, 2018 9:10 PM To: cnc-list@cnc-list.com Cc: john sandford Subject

Stus-List Perko Head Door Latch

Circa 1981... trying to remove to polish it up and make it look presentable. But seem to be running into a dead end is there any kind of secret that I should know about before I break the darn thing? Thanks in advance Get Outlook for Android ___ Than

Re: Stus-List Perko Head Door Latch

Ken, Thanks...that is it. It must that my shaft is stuck within the latch... Will polish on the door and not risk destroying it. Thanks again. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Ken Heaton via

Stus-List 455 minutes at 25 amps...

I'm still stuck in the old school amp hours capacity. And my new batteries are telling me 455 minutes at 25 amps. Could someone better at this basic concept help me equate this information to amp hour capacity? Rey to set my amp/volt meter. Thanks in advance. Get Outlook for Android

Stus-List Refrig

So. 3 year old old Danfoss 12 volt refrig. Last one lasted us 20 plus years. This one...? Worked great until this year. Start it up. Fan is going and we get frosting at the evaporator at where the tubes enter. But not consistent throughout evaporator. If a coolant leak would we get a

Re: Stus-List Catharsis message

David, We had two interesting experiences yesterday. We were moored in a Vineyard Haven, in the morning at low tide we felt this bang not once not twice I jumped up went to the cockpit and realized the boat was going up and down with waves and hitting the bottom not hard but hard of a scare

Re: Stus-List Removing old stickers

I second the 3M erasur. worked great on my Awlgripped hull. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Charlie Nelson via CnC-List Sent: Wednesday, July 18, 2018 11:59 AM To: cnc-list@cnc-list.com Cc

Stus-List Refrif fan

I want to add a rechargeable fan to the icebox to better distribute the cold. Any suggestions out there? Thanks in advance Get Outlook for Android ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly ap

Stus-List Tablet For Navigation...

Need to buy a replacement. Anybody here want to sell a surplus unit? Rather keep the money in the "family"... David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 ___ Thanks everyone for supporting this list with your con

Re: Stus-List Tablet For Navigation...

7.0 Plus in leather case with screen protector. Model # GT-P6210. $30 plus shipping. Android 4.0.4 Not sure if the current Navionics will run on that version of Android. I had Navionics on it a few years ago. Dennis C. Touche' 35-1 #83 Mandeville, LA On Thu, Jul 19, 2018 at 11:04 AM,

Re: Stus-List 2018 C&C Northeast Rendezvous -- Go or No Go?

.com>> wrote: Listers, With the 2018 C&C Northeast Rendezvous in Milford (www.cncnortheast.com<http://www.cncnortheast.com>) just over a month away, I am contemplating cancelling the event this year…. So far, from the regulars: * Hanuman is sold. * Aries is damaged. *

Re: Stus-List Standard Horizon CMP23(b or w)

I tried to no avail. Had to go to EBay and buy new. Get Outlook for Android From: CnC-List on behalf of Bill Coleman via CnC-List Sent: Monday, July 23, 2018 4:17:47 PM To: cnc-list@cnc-list.com Cc: Bill Coleman Subject: Re: Stus-List Standard Horizon CMP23(b

Re: Stus-List [EXTERNAL] Re: Standard Horizon CMP23(b or w)

Buy it. + Get Outlook for Android From: CnC-List on behalf of Della Barba, Joe via CnC-List Sent: Monday, July 23, 2018 1:52:02 PM To: cnc-list@cnc-list.com Cc: Della Barba, Joe Subject: Re: Stus-List [EXTERNAL] Re: Standard Horizon CMP23(b or w) https://www.

Stus-List Holy Crap...

D/United-States?refSource=standard%20listing#.W1ZvV7gnaUk> www.yachtworld.com 1982 C&C Sail boat for sale, located in Maryland, DEALE David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 ___ Thanks everyone for supporting this lis

Re: Stus-List Holy Crap...

If it has not been sunk...h. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Joel Aronson via CnC-List Sent: Tuesday, July 24, 2018 3:57 PM To: cnc-list Cc: Joel Aronson Subject: Re: Stus-List Holy Crap

Stus-List I am so done with bilge pumps...

Every friggin year more BS. So changing out primary to diaghram and secondary (3000+ gph) to a higher quality (not Rule) pump recirculating. Any brand suggestions? Thanks in advance. Get Outlook for Android ___ Thanks everyone for supporting this

Re: Stus-List I am so done with bilge pumps...

icloud.com<mailto:dainyr...@icloud.com> On Jul 24, 2018, at 6:54 PM, Richard via CnC-List mailto:cnc-list@cnc-list.com>> wrote: David, can you provide a few more details? What do you have currently and what quit working? I have bilge pump issues myself and need to do something different with

Re: Stus-List I am so done with bilge pumps...

. Bob Bob Boyer s/v Rainy Days C&C Landfall 38 (Hull # 230) (Presently in Baltimore for the summer) blog: dainyrays.blogspot.com<http://dainyrays.blogspot.com> email: dainyr...@icloud.com<mailto:dainyr...@icloud.com> On Jul 24, 2018, at 6:54 PM, Richard via CnC-List mailto:cnc-list@c

Re: Stus-List I am so done with bilge pumps...

Let me rephrase that question...i am using the same wire size the switch and pump are using. Still bigger? Get Outlook for Android From: David Sent: Wednesday, July 25, 2018 9:44:50 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List I am so done with bilge

Re: Stus-List C&C 34 - 3GM30F oil pressure warning - theory or solved?

Have you checked the ground? David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of SEAN CONNER via CnC-List Sent: Monday, July 30, 2018 4:20 PM To: cnc-list@cnc-list.com Cc: SEAN CONNER Subject: Stus-List C&

Re: Stus-List Oil pressure and smoke

I dropped Corsair's oil pan during her upper end rebuild. I drained the oil the usual way...via the dipstick. Very little oil in the pan. Maybe a few tablespoons. Dunno if that fact helps to know it the engine being at an angle changes readings, but we are getting 98% of the old oil out.

Re: Stus-List mystery item

Boom vang collar for roller reefing back in the old days. From: CnC-List on behalf of T Smyth via CnC-List Sent: Wednesday, August 1, 2018 3:32 PM To: cnc-list@cnc-list.com Cc: T Smyth Subject: Stus-List mystery item I’m trying to determine the use of an item

Re: Stus-List Advice on new racing Jib

Does your PHRF adjust down to 105? >From my Android From: CnC-List on behalf of ALAN BERGEN via CnC-List Sent: Thursday, August 2, 2018 10:19:13 PM To: C&C Cc: ALAN BERGEN Subject: Re: Stus-List Advice on new racing Jib I race with a 105% North genoa, and

Re: Stus-List Advice on new racing Jib

Interesting...our PHRF fleet does not allow for an allowance below a 135. Which is pretty silly considering the dominant Smokin' SW breeze here we do not need anything more than a 110-120. And raising the main is an option. David F. Risch, J. D. Gulf Stream Associates, LLC (401

Re: Stus-List Oil drops in coolant

Peter, I replaced my head gasket 2 years ago. Call if you want to discuss. >From my Android From: CnC-List on behalf of PETER OCAMPO via CnC-List Sent: Friday, August 3, 2018 3:10:50 PM To: cnc-list@cnc-list.com Cc: PETER OCAMPO Subject: Stus-List Oil dro

Re: Stus-List Broken breaker?

Yup. Leave mine on. Just use battery switch. >From my Android From: CnC-List on behalf of Doug Mountjoy via CnC-List Sent: Sunday, August 5, 2018 11:41:59 AM To: cnc-list@cnc-list.com Cc: Doug Mountjoy Subject: Re: Stus-List Broken breaker? Happens, espec

Re: Stus-List [EXTERNAL] Re: How narrow a berth is too narrow

Actually given all this discussion about tough docking. Makes it easier...just put your fenders out and push in. Kind of like we do with inflatables at a dinghy dock. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on

Re: Stus-List C&C 29-2 Topping Lift Setup Question

constant state of compression (and will eventually stay compressed). David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Marek Dziedzic via CnC-List Sent: Monday, August 20, 2018 11:15 PM To: cnc-list@cnc-list.com Cc

Re: Stus-List Water valves

I was surprised to find gate valves on my 1981 40'. I thought C & C would have known better. Replaced them all with proper seacocks. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Dennis C. via CnC-L

Stus-List Raymarine Instrument Fun

Thanks in advance. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send co

Stus-List Solar and batteries

So I set up my 50 watt solar panel and controller and when I come aboard the boat the batteries are reading 13.1 13.2. I thought a battery at rest read 12.7 fully charged. Even now at sunset they are reading over 13. Is my controller cooking the batteries? Thanks in advance. >From my Android

Re: Stus-List Long Island

I grew up in Melville. Try The Vanderbilt Museum in Northport >From my Android From: CnC-List on behalf of Dennis C. via CnC-List Sent: Thursday, August 30, 2018 1:46:10 PM To: CnClist Cc: Dennis C. Subject: Re: Stus-List Long Island I'll be in the Melvi

Re: Stus-List FWD: 2018 C&C Northeast Rendezvous -- The Details (Registration Closes Friday, 3:00p)

To all those attending.the 2018 Rendezvous. Have a great time. We would.live to be there but for the inconvenience of.a wedding in September (WTF!). To adequately thank Edd for all of his hard work, and don't tell I said this, is to offer him, neigh, insist, on he having lots and.lots of Tequ

Re: Stus-List Holding tanks

White PVC is gas permeable? >From my Android From: CnC-List on behalf of Dave via CnC-List Sent: Saturday, September 1, 2018 5:47:38 AM To: kasel...@q.com Cc: syerd...@gmail.com; cnc-list@cnc-list.com Subject: Re: Stus-List Holding tanks Dave, On my 33-2

Re: Stus-List Deck core repair advice sought

A "Lawn-Guy-Lander" being irascible? Never happen >From my Android From: CnC-List on behalf of Josh Muckley via CnC-List Sent: Friday, August 31, 2018 10:03:18 PM To: C&C List Cc: Josh Muckley Subject: Re: Stus-List Deck core repair advice sought I kn

Re: Stus-List 3D File

DING DING DINGYou won the prize. Was wondering how long that would take. >From my Android From: CnC-List on behalf of Greg Arnold via CnC-List Sent: Wednesday, September 5, 2018 5:25:23 PM To: cnc-list@cnc-list.com Cc: Greg Arnold; Rob Ball Subje

Stus-List Rob Ball

Congrats Rob!Hope to see you on the Bay. David F. Risch 1981 40-2 Corsair >From my Android ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the l

Re: Stus-List Test

Dud we pass...? >From my Android From: CnC-List on behalf of Brian Carpenter via CnC-List Sent: Sunday, September 9, 2018 4:58:50 PM To: cnc-list@cnc-list.com Cc: Brian Carpenter Subject: Stus-List Test Test [emwd_cloud_email] Brian Carpenter Owner Prov

Stus-List Instruments...

My son's friend is trying to add instruments to his boat. Any spares for sale out there? Thanks in advance. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 [https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]&

Re: Stus-List Instruments...

Doug...can you send me an email offline? davidrisc...@msn.com David F. Risch, J. D. From: CnC-List on behalf of Doug Mountjoy via CnC-List Sent: Monday, September 10, 2018 11:39 PM To: cnc-list@cnc-list.com Cc: Doug Mountjoy Subject: Re: Stus-List

Re: Stus-List Nice day sail

Thats me in orange... >From my Android From: CnC-List on behalf of Marek Dziedzic via CnC-List Sent: Monday, September 17, 2018 8:57:03 AM To: cnc-list@cnc-list.com Cc: Marek Dziedzic Subject: Re: Stus-List Nice day sail Are you talking about around 1:42?

Re: Stus-List 1982 C&C 25

bably need it most. Engine just lifts out of the water every time bow goes down into a wave. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Roger Slade via CnC-List Sent: Wednesday, September 19, 2018 8:15 AM To

Stus-List Fridge Fan

David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 [https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_t

Re: Stus-List Insurance

Rick...can you call me? Thanks. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Rick Brass via CnC-List Sent: Thursday, September 20, 2018 9:33 AM To: cnc-list@cnc-list.com Cc: Rick Brass Subject: Re: Stus-List

Re: Stus-List Fridge Fan

Thanks Don...just ordered one. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Donald via CnC-List Sent: Thursday, September 20, 2018 6:39 AM To: cnc-list@cnc-list.com Cc: donaldsebast...@me.com Subject: Re: Stus

Re: Stus-List 37+ Rudder Bearing

I did the same thing. In fact I got it back on by myself... David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Gary Russell via CnC-List Sent: Monday, September 24, 2018 1:44 PM To: C&C List Cc: Gary Rus

Stus-List Refinishing Table ...

Hello, I am taking out my cabin table from my 81' 40- 2 to refinish this winter. Anybody refinish one? Thanks in advance. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 [https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v

Re: Stus-List Refinishing Table ...

Thanks Andy...I would like to dissemble it to do it right, but I fear it is all glued together and must be refinished assembled. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Andrew Burton via CnC-List Sent

Re: Stus-List Refinishing Table ...

Of course...and lets invite that reprobate Harry... David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Andrew Burton via CnC-List Sent: Monday, September 24, 2018 4:45 PM To: cnc-list@cnc-list.com Cc: Andrew Burton

Re: Stus-List Cutlass bearing

Easier than that. I just uncoupled the shaft at the tranny and removed flange. Slid shaft forward... David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 From: CnC-List on behalf of Joel Aronson via CnC-List Sent: Monday, September 24, 2018

Re: Stus-List CnC-List Digest, Vol 152, Issue 76 Tree Trimming

The process is to call your insurance company who will deal with you on the claim. They then will contact the yards insurance company to recover what they can. As someone else said...change yards/boat carrier.That is really lame. David F. Risch, J. D. Gulf Stream Associates, LLC (401

Re: Stus-List C&c40 -2 std rig main sail

Peter call me... >From my Android From: CnC-List on behalf of PETER OCAMPO via CnC-List Sent: Tuesday, September 25, 2018 12:57:57 PM To: cnc-list@cnc-list.com Cc: PETER OCAMPO Subject: Stus-List C&c40 -2 std rig main sail Hello all Before I put in an ord

Re: Stus-List C&c40 -2 std rig main sail

Peter if you don't want headsails i might... >From my Android From: CnC-List on behalf of PETER OCAMPO via CnC-List Sent: Wednesday, September 26, 2018 6:15:14 AM To: cnc-list@cnc-list.com Cc: PETER OCAMPO Subject: Re: Stus-List C&c40 -2 std rig main sail

<    4   5   6   7   8   9   10   11   12   13   >