Of course...and lets invite that reprobate Harry...
David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Andrew Burton via CnC-List <cnc-list@cnc-list.com> Sent: Monday, September 24, 2018 4:45 PM To: cnc-list@cnc-list.com Cc: Andrew Burton Subject: Re: Stus-List Refinishing Table ... Dave, I don't see a problem doing it assembled...take the leaves off, of course. But otherwise shouldn't be a problem. It will work best if you can suspend it while you varnish and let it dry. Do the most difficult bits first! I'm just heading off on a delivery to the Chesapeake, but back next week. How about that drink we keep talking about? I should be free most evenings. I'll be up at LMI working on Masquerade all week. Andy Andrew Burton 139 Tuckerman Ave Middletown, RI USA 02842 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 On Sep 24, 2018, at 16:21, David via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Thanks Andy...I would like to dissemble it to do it right, but I fear it is all glued together and must be refinished assembled. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>> on behalf of Andrew Burton via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Sent: Monday, September 24, 2018 4:14 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Andrew Burton Subject: Re: Stus-List Refinishing Table ... Need you ask? I used Epiphanes Gloss on all the wood. It came out beautiful, as you would expect. It's all in the prep work. Andy Andrew Burton 139 Tuckerman Ave Middletown, RI USA 02842 http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 On Sep 24, 2018, at 15:58, Fred Hazzard via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: What finish is on your table and in what condition? What would you like it to look like? Fred Hazzard Fury Portland Or On Mon, Sep 24, 2018 at 12:48 PM David via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Hello, I am taking out my cabin table from my 81' 40- 2 to refinish this winter. Anybody refinish one? Thanks in advance. David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 [https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> Virus-free. www.avast.com<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link> _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
