Peter is asking best practices on how to drill out the current sleeve to accommodate a new sleeve. I did it years ago for Corsair, and although it worked (it involved a wooden plug the diameter of the old sleeve a long drill from the new hole saw and much luck) I remember reading a seemingly better method on this list.
David F. Risch, J. D. Gulf Stream Associates, LLC (401) 419-4650 ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of PETE via CnC-List <cnc-list@cnc-list.com> Sent: Sunday, June 3, 2018 7:49 PM To: cnc-list@cnc-list.com Cc: PETE Subject: Stus-List Rudder play fix on c&c 40 1983 aft cabin Hello all I am in the process of fixing the excess play in my rudder feels like a quarter inch or more . There is approximately 1-2 mm of space between sleeve and rudder post. I have removed the rudder and it appears there is a Delrin sleeve any advice would be appreciated on the fix. Thanks peter Goonie Island Portland ME
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
