boun...@cnc-list.com] On Behalf Of Joe Della
Barba via CnC-List
Sent: Friday, January 26, 2018 7:46 PM
To: cnc-list@cnc-list.com
Cc: Joe Della Barba
Subject: Re: Stus-List AIS improvement + general rewiring
No luck ☹
The CP180 will NOT take data into port 1 or 2 no matter what. To make matters
w
c-list.com] On Behalf Of Joel Aronson
via CnC-List
Sent: Friday, January 26, 2018 11:57 AM
To: cnc-list@cnc-list.com
Cc: Joel Aronson
Subject: Re: Stus-List AIS improvement + general rewiring
Joe,
Glad you are making progress! I keep forgetting to test out my WiFi module on
my AIS.
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson
via CnC-List
Sent: Friday, January 26, 2018 11:57 AM
To: cnc-list@cnc-list.com
Cc: Joel Aronson
Subject: Re: Stus-List AIS improvement + general rewiring
Joe,
Glad you are making progress! I keep forgetting to test out my WiFi module
What $30 WiFi link are you talking about?
Gary
S/V Kaylarah
'90 C&C 37+
East Greenwich, RI, USA
~~~_/)~~
On Fri, Jan 26, 2018 at 11:43 AM, Della Barba, Joe via CnC-List <
cnc-list@cnc-list.com> wrote:
> Things are coming along with a snag or two. Wouldn’t be a boat otherwise.
>
> Thing
Joe,
Glad you are making progress! I keep forgetting to test out my WiFi module
on my AIS. I know it is transmitting, but the app to display AIS is on the
iPad which usually stays in the house. My Navionics app on my phone does
not show AIS.
How old is the antenna cable?
Joel
On Fri, Jan 26,
Things are coming along with a snag or two. Wouldn’t be a boat otherwise.
Thing one is I cannot get the CP180 to display AIS targets. It is driving me
nuts. It even went back to S-H and that didn’t help. More to come, I got a
diagnostic mode setup from them to try.
The other thing is out of my 3
N via CnC-List
*Sent:* Tuesday, December 19, 2017 2:35 PM
*To:* C&C mailto:cnc-list@cnc-list.com>>
*Cc:* ALAN BERGEN mailto:trya...@alumni.usc.edu>>
*Subject:* Re: Stus-List AIS Improvement
When I upgraded my old Raytheon C80 MFD, I was able to download
the
t;>
>>> http://www.yakbitz.com/Default.aspx - cheapest NMEA O183 to Wifi on the
>>> planet.
>>>
>>>
>>>
>>>
>>>
>>> Joe Della Barba
>>>
>>> j...@dellabarba.com
>>>
>>>
*From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com
<mailto:cnc-list-boun...@cnc-list.com>] *On Behalf Of *ALAN BERGEN
via CnC-List
*Sent:* Tuesday, December 19, 2017 2:35 PM
*To:* C&C mailto:cnc-list@cnc-list.com>>
*Cc:* ALAN BERGEN mailto:trya...@alum
*ALAN
> BERGEN via CnC-List
> *Sent:* Tuesday, December 19, 2017 2:35 PM
> *To:* C&C
> *Cc:* ALAN BERGEN
> *Subject:* Re: Stus-List AIS Improvement
>
>
>
> When I upgraded my old Raytheon C80 MFD, I was able to download the new
> firmware from their website - no
...@dellabarba.com <mailto:j...@dellabarba.com>
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of ALAN BERGEN
via CnC-List
Sent: Tuesday, December 19, 2017 2:35 PM
To: C&C
Cc: ALAN BERGEN
Subject: Re: Stus-List AIS Improvement
<https://ssl.gstatic.com/ui/
nd end up with a mile of
> wire.
>
>
>
> Joe Della Barba
>
> j...@dellabarba.com
>
> Coquina
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Joel
> Aronson via CnC-List
> *Sent:* Saturday, December 23, 2017 3:10 PM
>
>
> *To:
December 23, 2017 3:10 PM
To: cnc-list@cnc-list.com
Cc: Joel Aronson
Subject: Re: Stus-List AIS improvement + general rewiring
I was able to connect my cheap Daisy2 AIS receiver to my onboard PC via USB.
And my plotter via 183.
Lots of targets around Annapolis!
Joel
On Tue, Dec 19
I was able to connect my cheap Daisy2 AIS receiver to my onboard PC via
USB. And my plotter via 183.
Lots of targets around Annapolis!
Joel
On Tue, Dec 19, 2017 at 1:13 PM Frederick G Street via CnC-List <
cnc-list@cnc-list.com> wrote:
> I don’t know of any gear that even supports AIS over 4800
When I upgraded my old Raytheon C80 MFD, I was able to download the new
firmware from their website - no charge.
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
Della Barba, Joe via CnC-List
I have hit a snag with my project. My CP180 plotter is refusing to take AIS
input on any NMEA por
I don’t know of any gear that even supports AIS over 4800; everything requires
38400 baud.
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^(
> On Dec 19, 2017, at 12:04 PM, Della Barba, Joe via CnC-List
> wrote:
>
> Yes it does. If you have a l
: Re: Stus-List AIS improvement + general rewiring
AIS needs 38,400.
On Tue, Dec 19, 2017 at 12:08 PM, svpegasus38 via CnC-List
mailto:cnc-list@cnc-list.com>> wrote:
You can go into the plotter and change the baud rate. I had same problem on my
S-H 390. If I remember correctly ( highl
gt; Rebecca Leah
> Lf39
>
> Original message
> From: "Della Barba, Joe via CnC-List"
> Date: 12/19/17 07:44 (GMT-08:00)
> To: cnc-list@cnc-list.com
> Cc: "Della Barba, Joe"
> Subject: Re: Stus-List AIS improvement + general rewiring
>
&
ella Barba, Joe" Subject:
Re: Stus-List AIS improvement + general rewiring
The AIS is also connected to OpenCPN and it works fine. The data is definitely
coming out of the AIS unit. The AIS is a GPS receiver as well and sends AIS and
GPS data out of the 38.4K port. Usually a GPS will se
via CnC-List
Sent: Tuesday, December 19, 2017 10:38 AM
To: cnc-list@cnc-list.com
Cc: Joel Aronson
Subject: Re: Stus-List AIS improvement + general rewiring
Joe
Have you tried connecting the AIS to a PC running OpenCPN or something similar
to test the AIS box?
Why would the AIS send out GPS
Joe
Have you tried connecting the AIS to a PC running OpenCPN or something
similar to test the AIS box?
Why would the AIS send out GPS sat signals?
Waterproof boxes look nice.
I've got my Daisy2 AIS receiver connected to my onboard PC. Amazing how
many boats leave their AIS on all winter! Mus
I have hit a snag with my project. My CP180 plotter is refusing to take AIS
input on any NMEA port.
The firmware version is from 2008, so I think I'll be sending it back to S-H
for a firmware upgrade. This will cost about $35, which
IMHO is quite reasonable and also a nice contrast to brand R, wh
send a position request and
see you on their charplotter, set it as a waypoint, and be on their way.
Joe
Coquina
From: Lee Youngblood [mailto:leeyoungbl...@earthlink.net]
Sent: Wednesday, December 13, 2017 12:24 PM
To: Della Barba, Joe
Subject: Re: Stus-List AIS improvement + general rewiring
computer.
Likewise a distress call should show up.
Joe
Coquina
From: Lee Youngblood [mailto:leeyoungbl...@earthlink.net]
Sent: Wednesday, December 13, 2017 12:07 PM
To: Della Barba, Joe
Subject: Re: Stus-List AIS improvement + general rewiring
Hi Joe,
What is DSC out, from the radio? I don’t know
I have got most of my gear in and this is the wiring diagram so far:
http://www.moyermarine.com/forums/attachment.php?attachmentid=13105&stc=1&d=1513183308
There are some possible belt and suspenders mods I haven’t decided if I want to
add yet. The plotter could also feed the VHF and computer if
-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jerome
> Tauber via CnC-List
> Sent: Wednesday, November 08, 2017 11:05 AM
> To: cnc-list@cnc-list.com
> Cc: Jerome Tauber
> Subject: Re: Stus-List AIS improvement + general rewiring
>
> If you are using a USB port
AIS is at 38.4 K, not 4800.
Joe
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jerome
Tauber via CnC-List
Sent: Wednesday, November 08, 2017 11:05 AM
To: cnc-list@cnc-list.com
Cc: Jerome Tauber
Subject: Re: Stus-List AIS improvement + general rewiring
If you are
t: Re: Stus-List AIS improvement + general rewiring
Joe,
Got the unit and hooked it up to laptop running OpenCPN and SeaClear III.
Went to beach with whip VHF antennae to test. Nuthin'.
That might be because there was nuthin' sending AIS signals or the laptop was
not communicati
ive into the internet abyss ?
>
>
> Thanks in advance.
>
> David F. Risch
> (401) 419-4650 (cell)
>
>
> From: CnC-List on behalf of Della Barba, Joe
> via CnC-List
> Sent: Monday, November 6, 2017 11:02 AM
> To: cnc-list@cnc-list.com
> Cc: Della Ba
Behalf Of Joel Aronson
via CnC-List
Sent: Monday, November 06, 2017 10:56 AM
To: cnc-list@cnc-list.com
Cc: Joel Aronson
Subject: Re: Stus-List AIS improvement + general rewiring
Joe,
Look for yourself on Marine Traffic. Or let me know when the unit has been on
for a while.
Please l
com wrote:
>
> To: "cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>"
> mailto:cnc-list@cnc-list.com>>
> Subject: Re: Stus-List AIS improvement + general rewiring
> Message-ID:
><mailto:CAEL16P80ckBqS2uG2Y0Hz=4btlqhnv5j9nomgyjxeyf6+-3...@mail.g
Hi
I run Navionics on three Idevices. The software and the chart subscription
share as one as long as they are all in the Apple Family Share.
My Raymarine is a separate Navionics chart subscription. Tried directly with
appeal to them... no
The Raymarine MFD wifi iPad app puts the iPad in as
That may have been SAR (search and rescue).
— Fred
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^(
> On Nov 6, 2017, at 10:02 AM, Della Barba, Joe via CnC-List
> wrote:
>
> Speaking of which, there is at least one airplane flying around with
-list.com
Cc: Joel Aronson
Subject: Re: Stus-List AIS improvement + general rewiring
Joe,
Look for yourself on Marine Traffic. Or let me know when the unit has been on
for a while.
Please let me know how the NMEA WiFi bridge works. Could be much simpler than
what I am trying to do with Signal K
, and both connect to my
Ray eS7.
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba,
Joe via CnC-List
Sent: Monday, November 6, 2017 10:39 AM
To: cnc-list@cnc-list.com
Cc: Della Barba, Joe
Subject: Re: Stus-List AIS improvement + general rewiring
I have the AIS unit
Of *ALAN
> BERGEN via CnC-List
> *Sent:* Monday, October 30, 2017 12:13 PM
> *To:* C&C
> *Cc:* ALAN BERGEN
> *Subject:* Re: Stus-List AIS improvement + general rewiring
>
>
>
> Joe:
>
> I have an AIT2000 and Raymarine C80 MFD. The AIS out goes to the C80 NMEA
&g
for about half the price.
Thanks
Joe
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of ALAN BERGEN
via CnC-List
Sent: Monday, October 30, 2017 12:13 PM
To: C&C
Cc: ALAN BERGEN
Subject: Re: Stus-List AIS improvement + general rewiring
Joe:
I have an AIT2000 and Raymar
Joe:
I have an AIT2000 and Raymarine C80 MFD. The AIS out goes to the C80 NMEA
0183 in and the AIS in goes to the C80 out. Since I have a separate GPS,
that connects to my VHF for the DSC connection. I use a separate VHF
antenna for the AIS, and it can be used as a VHF antenna in case I ever
los
r 30, 2017 11:18 AM
To: cnc-list@cnc-list.com
Cc: Frederick G Street
Subject: Re: Stus-List AIS improvement + general rewiring
Joe — you should be able to identify what the DY AIS is doing by looking at the
serial output via HyperTerminal on your laptop (assuming you have a way to get
serial in, lik
Joe — you should be able to identify what the DY AIS is doing by looking at the
serial output via HyperTerminal on your laptop (assuming you have a way to get
serial in, like an RS232 to USB adapter).
— Fred
Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfiel
Behalf Of Della Barba,
Joe via CnC-List
Sent: Monday, October 30, 2017 11:03 AM
To: cnc-list@cnc-list.com
Cc: Della Barba, Joe
Subject: Stus-List AIS improvement + general rewiring
The old AIS was tested on my Sunday afternoon sail and got about 15 targets. It
is now off the boat to be shipped to
The old AIS was tested on my Sunday afternoon sail and got about 15 targets. It
is now off the boat to be shipped to its new owner. The new one is on the way,
a Digital Yacht AIT1500. So now I need to redo the various NMEA connections and
the first thing I am trying to figure is the DSC-in signa
42 matches
Mail list logo
