Joe and Joel,
I have used ShipModul Miniplex2 for many years to send NMEA data from the chart 
plotter at the helm to MacENC to a Mac laptop using USB, but more recently 
using it to convert the NMEA to wifi so it can be sent to an iPad.  I’ve been 
using iNavX on the iPad, but probably other software works as well. You connect 
the iPad to the Wifi name and then tell iNavX what host and port that the 
Miniplex is transmitting on.  Explained clearly in the iNavX program.  Seems to 
work very well.

Eric
Cats Paw
Mattapoisett, MA


> On Nov 6, 2017, at 11:01 AM, cnc-list-requ...@cnc-list.com wrote:
> 
> To: "cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>" 
> <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>>
> Subject: Re: Stus-List AIS improvement + general rewiring
> Message-ID:
>       <CAEL16P80ckBqS2uG2Y0Hz=4btlqhnv5j9nomgyjxeyf6+-3...@mail.gmail.com 
> <mailto:CAEL16P80ckBqS2uG2Y0Hz=4btlqhnv5j9nomgyjxeyf6+-3...@mail.gmail.com>>
> Content-Type: text/plain; charset="utf-8"
> 
> Joe,
> 
> Please let me know how the NMEA WiFi bridge works.  Could be much simpler
> than what I am trying to do with Signal K  and a router.
> 
> Joel
> 

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to