h this list and help to
> keep it active. Please help by making a small contribution using PayPal
> at: https://www.paypal.com/paypalme/stumurray All contributions are
> greatly appreciated.
>
> Your contributions help pay the fees associated with this list and help to
> keep it
$5k or so Cdn
to have one made and shipped. May be a bit more now...
https://cci.one/marine/foils-a-z/cc/
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2024-05-15 20:40, Daniel via CnC-List wrote:
Folks,
He who shall remain nameless managed to back down onto…
and use the
stamp to create the impression on new gelcoat.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2024-05-07 23:12, Wade Glew via CnC-List wrote:
Hi everyone, I wonder if anyone might be able to direct me to a
resource with instructions to fill drilled holes i
Yeah, at 12k lbs, likely need at least 2 volvo's.
or
Sportchassis.com would haul it with ease.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2024-04-12 15:22, Joe Della Barba via CnC-List wrote:
https://delaware.craigslist.org/bod/d/wilmington-1990-cc-34/7
There is a fit chart on the website when you goto shop
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2024-02-29 09:54, Wade Glew via CnC-List wrote:
In ordering size, any info re fit? I'm 5'9", 155 lb and thinking
Medium. Make sense?
Wade
Oh Boy
3
locker
held in place by the locker hatch. I then
just feed it antifreeze.
I've done similar to my well pump at my cottage, in case I lose prime, I
can simply push the water to the
pump from the well using a secondary small pump to regain prime. Works
like a charm.
Cheers,
Jeff Nelson
.
I wouldn't really see an issue in routing to the cockpit drain, it is
nearby and handy, and likely
resolves some of the access issues above.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2024-02-08 18:38, Alexander Netherton via CnC-List wrote:
Hello All
I have
Your car must be a 1950 chevy nomad to fit those sails in. :-)
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2024-01-16 20:48, CHARLES SCHEAFFER via CnC-List wrote:
Beautiful boat but she's priced pretty high. I'd like to see her
keel, probably a big
How much water? A little could be condensation...
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-10-26 14:59, Doug Mountjoy via CnC-List wrote:
I have a Yanmar 4JHE in my boat. After 4 months sitting on the hard, I
have water in the oil.Does anyone know where
y can be used as a cocktail shaker
after coffee time is well over. :-)
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-10-18 10:43, CHARLES SCHEAFFER via CnC-List wrote:
For me, coffee is a personal taste you get used to.
The french press flavor, is great, but to
stove top percone of the crew
threw the basket overboard in an over zealous cleaning moment.
I've been thinking of getting an espresso type...but the perc works good
enough for me and crew has never complained...
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On
Mine:
https://www.wayfair.ca/dining/pdp/corona-cast-iron-corn-wheat-and-grain-mill-with-high-hopper-manual-grain-grinder-grain-mill-dvqu1010.html
I didn't get it from wayfair...but have had it for a few decades. Makes
short work of coffee beans in the am.
Cheers,
Jeff Nelson
Muir Ca
I'm a traditionalist, I hand grind the coffee... :-) That said, you
would think that dewalt or Milwaukee would have
made a coffee grinder that fits their tool batteries...
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-10-17 10:54, Korbey Hunt via CnC-List
Ok. Seems like everyone is out sailing. I'll stop worrying.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-09-07 14:03, Ronald B. Frerker via CnC-List wrote:
I received one on 8/30, but nothing since until your email.
Ron
Wild Cheri
C&C 30-1
STL
I've not seen an email on this list since Aug 29th. Nothing in my spam
foldersI'm guessing some new
GMail setting perhaps...anyone have any suggestions?
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
Please show your appreciation for this list and the Ph
What is the app you are using?
I use Groceries shopping list for remembering things to take to the
boat/cottage/trip/lumber store/etc
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-06-07 12:28, CHARLES SCHEAFFER via CnC-List wrote:
Does anyone else use checkl
You only need one if you don't want to look like a Jeff Bezos rocket
shortly after launch.
Propane is heavier than airso if you do get a leak, it will form a
nice shaped charge in the bottom of your boat.
The ocean doesn't move that much.
Your choice.
Cheers,
Jeff Nelson
Mu
,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-05-17 12:34, Bill Coleman via CnC-List wrote:
I always save from one year to the next. Some store better than
others, but this Odyssey Triton holds up well, and does not settle out
very fast. Also, BTW, this is the best antifou
I believe Graham Collins has an article coming out in Good Old Boat mag
on some of this stuff
He's lurking on the list somewhere
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-04-19 13:08, CHARLES SCHEAFFER via CnC-List wrote:
Thought your email w
See:
https://www.zephyrwerks.com/sheave-sizing
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-03-16 11:58, Dennis C. via CnC-List wrote:
Randy,
They look like this?
https://drive.google.com/file/d/0B_sb5TfIENvsTzNCZWtUQ2JQeVE/view?usp=share_link&r
Yes! That would be a great option as well, if a larger bolt size isn't
possible for re-tapping, then just drill out
enough for the heli-coil of the right bolt size and good to go.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-03-10 09:21, Joel Aronson via
bt it. Which is actually good
news as you can grind it out and glue it back together
just time and really messy effort in a small spaceif you have to.
Try the re-tapping 1st.
Hope it all works out.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-03-10 0
opped
with a steel plate. Maybe you could wap
it with a new steel plate and through drill it from the sides to secure
it. Otherwise grinder and lots of new
fiberglass.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-03-10 06:17, Rob Hamlin via CnC-List wrote
ody
to go sailing with.
My future sails will be sock based.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-03-02 11:44, Della Barba, Joe via CnC-List wrote:
Bacon’s told me their price for the material had recently doubled, so
socks probably cost more too.
On th
Jahmon USA-500 out of Chester Yacht Club - Carl Davis owner
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-03-02 10:29, Robert Abbott via CnC-List wrote:
Jeff,
If you don't me asking, which J-105 do you race on.
Rob Abbott
AZURA
Please show your appreci
going to go with the sock method for UV
covers. We use one on the J-105 I race on and it isn't a big burden.
Anyhow food for thought.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-03-02 09:09, Joe Della Barba via CnC-List wrote:
My post about this from la
We solved the problem in a low tech way. We only have 2 types of beer
on board cold and warm.
When you grab a can if it is cold you drink it. If it is warm you throw
it in the farthest part of the ice box
and choose again. You get 3 grabs before you drink warm beer.
Cheers,
Jeff Nelson
Of course no sooner sent off but I found the one I was thinking of:
https://www.thecoastalpassage.com/windows.html
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-02-09 10:02, Jeff Nelson via CnC-List wrote:
Here is a link from my archivesI thought I had a
Here is a link from my archivesI thought I had a more descriptive
one with pictures, but can't find it:
Sail article:
https://www.sailmagazine.com/diy/replacing-fixed-portlights
link for VHB tape:
https://nhsmedia.com/vhbtape.htm
Cheers,
Jeff Nelson
Muir Caileag
C&C
Probably these guys have or can make it:
https://www.plastic-mart.com/category/159/marine-holding-tanks
Or
https://www.tank-depot.com/product.aspx?id=1168&page=3
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2023-01-28 00:36, ejwills1993--- via CnC-List wrote:
and you don't
want a broken snap shackle going flying by...
Something like:
https://marine.wichard.com/en/stainless-steel-hardware/rigging-adjusters/babystay-adjusters/with-handle/part-5556
Not sure how much load is on a 33 baby stay...
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
collar? I'd prefer not to add more holes to
the deck.
Bob Mann
Mystic
35-1 hull #85
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
How to install rivnut without a tool:
https://www.youtube.com/watch?v=I6H6wr7fJYo
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2022-10-31 12:04, Paul Fountain via CnC-List wrote:
I've used RivNuts on our vang after having issued with helicoils not havin
stall them with 2 wrenches.
I'm not sure what the load capabilities
are on these. I used them to install my Vang, but my bolts go in
horizontally through the boom, so most of the
load is on the boom material not pulling out the threadingand of
course, I'm a lot smaller boat.
nd masses.
Chuck S
On 10/28/2022 10:37 AM Matt Wolford via CnC-List wrote:
I steer so the red line projects to where I'm going, then look at my compasses. Done.
-Original Message-
From: Jeff Nelson via CnC-List
Sent: Friday, October 28, 2022 9:51 AM
To: cnc-list@cnc
know?
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
something like this might work for the wrench:
https://www.homedepot.ca/product/husky-adjustable-slip-nut-wrench/1000828297
Sorry I can't help with the buttons.
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2022-10-19 12:29, David Knecht via CnC-List wrote
steel-s69158007/
https://ambassadormarine.com/stainless-steel-sinks/rectangle-sinks
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2022-10-17 10:16, Leeward Rail via CnC-List wrote:
Someone on a forum is asking about a source for a replacement galley
for a1982 C&C 30
Thanks for thinking of us. Looks like Halifax area will be a little
less impacted. Still this mornings forecast 31 knots, gusting 63. NW.
Guess I better drop sails after the race on Wed and batten everything down.
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
my iPad
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
find a suitable replacement.
Anyone found one? Or, has anyone been able to refurbish theirs?
Pete W.
Siren Song
C&C 30-2
Irvington, Va.
Sent from my iPad
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
brand), but I can’t find a suitable replacement.
Anyone found one? Or, has anyone been able to refurbish theirs?
Pete W.
Siren Song
C&C 30-2
Irvington, Va.
Sent from my iPad
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
in case...)
Free to a good home, you pick it up in Halifax.
cheers,
Graham Collins
ex Secret Plans C&C 35 mk 3
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
The larger the conduit the more chance the cables will slap around
inside it, which will annoy you all night long.
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2022-08-19 09:32, Leeward Rail via CnC-List wrote:
Vhf coax LMR400UF
Cell booster antenna with
I do not believe there are any obstructions. That said 1.5 inches seems
pretty big for 5 - 7 wires...
what all you got going on up there?
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2022-08-18 14:17, leewardrail hotmail via CnC-List wrote:
Hello All,
ke of the Woods
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
m it's own wax paper and stretches and
breaks. Had to use a putty knife to get the wax paper off.
Chuck Scheaffer Resolute 1989 C&C 34R Annapolis
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
Yep the one with the key and idiot lights.
On 2022-07-07 11:13, Wade Glew via CnC-List wrote:
What "control panel" are you referring to? Ignition, oil/fuel gauges etc?
Wade
Oh boy 33 mk II
Lake of the Woods
On Thu, Jul 7, 2022, 08:48 Jeff Nelson via CnC-List,
wrote:
It
It's not for the starter...It is for power to the control panel. It
just happens to be behind the starter on top of the engine...
Which in my opinion is a really stupid place to hide it, and took me
forever to find.
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale
Had this happen to me. Mine has an obscure fuse right side facing aft,
near the starter. My fuse holder had
cracked and was intermittently permitting things to work perfectly or
not at all. Check that, and the ground
as others have mentioned.
--
Cheers,
Jeff Nelson
Muir Caileag
C&
a second and
have been told that nothing needs to change re the charging systems,
etc … What is involved in adding a second group 27 battery?
Thanks
Mike Hoyt
Persistence
Halifax, NS
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
throttle by hand to see if it changes
anything.
On 2022-06-28 11:13, Jeff Nelson via CnC-List wrote:
So that pretty much narrows it down to Fuel or exhaust. Have you
checked your mixing elbow to ensure it
is clear? Restriction would certainly keep the revs from going up.
After that it likely gets
.
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2022-06-28 11:10, Robert Abbott via CnC-List wrote:
Prop is cleanshouldn't matter if the prop is dirty, the engine
won't rev above 2,100 RPM's when in neutral.
On 2022-06-27 12:32 p.m., Korbey Hunt
7C84df9e7fe9f640afb435%7C1%7C0%7C637916104152524265%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=PK%2FYwnxqWx4XMXYZFP81N9%2FrYcsgDcBJADxd%2FfEBN6E%3D&reserved=0>
Motion Designs Limited
647 990 7752
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
ust a
complete circus. I don't mind watching circuses
while drinking my rhum.
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2022-06-21 09:23, Bill Coleman via CnC-List wrote:
So, do you zip down to your sheets, and zip up to them, or do you take
the sheets off
I had a similar experience when a new crew sheeted in the headsail
through the spreader. Real blast getting it off,
and didn't really do the sail much good. :-)
The saying most often heard on the boat now is to the spreader, not
through the spreader.
--
Cheers,
Jeff Nelson
Muir Ca
4 5 6 7
On 2022-04-05 08:51, Joe Della Barba via CnC-List wrote:
1
2
3
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
I think if you just put unsubscribe in the subject and send it to the
list you will be removed.
On 2022-03-21 20:37, Richard Walter via CnC-List wrote:
Greetings,
Can I please have my email address removed from the CnC-list?
Thank you,
Richard J. Walter
--
Cheers,
Jeff Nelson
Muir
since 3/12
Please trim your messages before sending to the list. Thankx
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
Please trim your messages before sending to the list. Thankx
I wonder if it is some sort of security setting, when it scans the
email, if it has html or other scripting languages
it puts it in an attachment so that it doesn't allow a virus on open.
Just a thought.
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
There are
Say that 3 times quickly..
On 2022-02-08 08:51, Della Barba, Joe via CnC-List wrote:
Plain text test
--
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
Well, really you should thank Sail Nova Scotia whose people did all the
work. :-)
I'm only the messengerbut I appreciate the accolades.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2022-02-02 14:44, Richard Bush via CnC-List wrote:
Jeff, that
If it was supposed to have "Testing email" as an html attachment didn't
get an attachment.
Just got exactly what you see below.
Using Thunderbird as email.
On 2022-02-02 14:53, Joe Della Barba via CnC-List wrote:
This one is sent in HTML mode
-Original Message-
From: Joe Della Barba
Mary had a little lamb.
5x5 here.
On 2022-02-02 14:26, Joe Della Barba via CnC-List wrote:
Testing email
1
2
3
Test One Two Three
East coast Canada should all be here:
https://www.sailnovascotiaydb.ca/yachts
Search on C&C and select all will give 156 entries...or adjust if you
want a specific model.
Except possibly Newfoundland...not sure if they use SailNS ratings or not.
Cheers,
Jeff Nelson
Muir Caileag
Everything normal for me, but I'm only getting 4 or 5 messages a day.
I've been looking in spam etc, but
that's all I'm seeingso something I think is screening out the
normal volume.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Y.C.
On 2022-02-0
can find around the yard to
alert people they are backing into my boat! Njord and I suffered the
same fate, same delivery driver, 2 different
clubs one year. I think I've exhausted the used rudder market in Nova
Scotia, so next one will be my
buddies in CCI, Ottawa.
Cheers,
Jeff Nelson
In the footer of the message...
On 2022-01-05 13:32, Brian Davis via CnC-List wrote:
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution --https://www.paypal.me/stumurray
min chartplotter, on the J-105 we have
all raymarine with a plethora of data sources and displays to give us
all kinds of useful and useless information.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Yacht Club
On 2021-10-12 4:28 p.m., Bob Mann wrote:
Jeff,
You are corr
Don,
I think you meant this for Bob, who is trying to find a clever way
of determining the layline bearing.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Yacht Club
On 2021-10-12 12:11 p.m., Don Kern via CnC-List wrote:
Jeff,
Let me assume that your boat is simila
dn't be your layline, as you need a course of 310. Also,
if I use any of those course numbers, they will
remain constant, whereas the bearing to the mark will constantly change
as you get further from the rhumbline (dead down wind).
Cheers,
Jeff Nelson
Muir Caileag
C&C30 - 549
uld
imagine the arrow is pointing somewhere aft indicating your apparent
wind which should be forward of your stern
a bit....
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Armdale Yacht club
On 2021-10-08 12:15 p.m., Bob Mann via CnC-List wrote:
I still need to review the geom
Mike,
You know that all Helms and Tacticians expect the crew to be America's
Cup experts.
I guess that's why the Foredeck Union came into being.
:-)
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 0549
Armdale Yacht Club
On 2021-10-06 1:42 p.m., Hoyt, Mike via CnC-List w
e out all the VMG
stuff.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 0549
Armdale Yacht Club
On 2021-10-06 1:25 p.m., Bob Mann via CnC-List wrote:
I don't understand how either answer is telling me it's time to gybe.
Bob
On 10/06/2021 11:37 AM Shawn Wright via CnC-List
a good article to get you thinking:
http://www.oceansail.co.uk/Articles/VMGArticle.php
Hope this helps.
Jeff Nelson
Muir Caileag
C&C 30 549
Armdale Yacht Club
On 2021-10-06 12:02 p.m., Bob Mann via CnC-List wrote:
I'm fairly new to flying a spinnaker. I did it last weekend in a race
and I
This is a good source, I don't know of anyone locally...if you find one
let us know:
https://www.fairviewfittings.com/products/gas-control-components/
Cheers,
Jeff Nelson
Muir Caileag
C&C30 - 549
Armdale Yacht Club
On 2021-09-27 10:30 a.m., Hoyt, Mike via CnC-List wrote
I've got an unused week of vacation, if you need delivery crew for
somewhere.
Still having a hard time coming to grips with your loss. I can't
imagine loosing mine.
Best of luck, let me know if you need anything.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 0549
Ar
I believe there is only 1 lock at St. Peter's (double gate, but one
lock), and a swing bridge.
There is another bridge at Iona to make it up through the narrows if you
want to enter/exit from
the North.
Cheers,
Jeff Nelson
C&C30 0549
On 2021-08-03 7:36 a.m., Ken Heaton via
Glad it ended well.
Cheers,
Jeff
On 2021-07-23 10:17 a.m., Bill Coleman via CnC-List wrote:
Well, Adrian wins the Bronze Thunder Mug -
I put a 90/130 watt soldering gun on the stud for about 3 minutes, put some
Garr-Pike Vice-Grips on, JUST 2 THREADS showing to grab onto!
I couldn't believe
-fiberglass the transom and
start over. The boats are plastic,
and can be glued back together indefinitely. Obviously to make it
structural and cosmetic, some
skill is required with Fiberglass.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
On 2021-07-20 3:41 p.m., Bill Coleman
Your sailing association should be able to dig that answer up for you.
OntarioSailing.ca
Glen Lethbridge
Toll Free: (888) 672-SAIL (7245)ext: 3224
email: execdir at ontariosailing.ca
On 2021-06-16 8:50 p.m., Marek Dziedzic via CnC-List wrote:
Hello,
This is a question to Canadian list membe
Got mine from South Shore Yachts. bolted right up. They make them out
of stainless steel,
the originals were cast aluminum...not sure if yours is the same.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 mk 1 0549
Armdale Yacht club
On 2021-06-14 5:18 p.m., Bruce Whitmore via CnC-
own to the
hull (carefully) and pop them out.
Good luck.
Jeff Nelson
Muir Caileag
C&C 30 Mk 1 - 549
On 2021-06-08 9:23 a.m., Bruno Lachance via CnC-List wrote:
I will go back to the boat later today and try again to loosen the
parts. Korbey I thought about using a torch, but hones
Wow $8/board ft is cheap. Up here $38/board ft. Almost cheaper to buy
a boat with good teak steps
than to replace them. I priced out lumber for a small bed stand table
in white oak was going to cost me
$600. Guess it's time for me to buy a mill. I have 45 acres of wood
growing...unfortunate
Like this:
https://neotimber.com/decking/inspiration/colours/teak-composite-decking/
I'm sure someone in North America does this...
Cheers,
Jeff Nelson
On 2021-06-07 1:03 a.m., CHARLES SCHEAFFER via CnC-List wrote:
I'd look for a plastic/composite decking product and make treads
Yeah, love CB. We did the last race the cape in J-29 Jahmon, then did
last East Bay Regatta
in J-105 Jahmon. Hoping regatta scheds will hold to get up there again
this year.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 - 549
Halifax, NS
On 2021-05-05 10:31 a.m., Hoyt, Mike w
That looked like a great race.
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
se
Here's a boat tour vid shot about 3 months ago...
https://www.youtube.com/watch?v=yL7cfMhKdzs
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 Mk1.
On 2021-04-13 7:34 p.m., Joel Delamirande via CnC-List wrote:
Nice boat
On Tue, Apr 13, 2021 at 5:29 PM Dan via CnC-List
mailto:cnc
Yep. I was on the boat before it left Armdale for Caribbean. Looked
pretty good then, and I know
Dan's been doing more fixing along the way. You can find video's on
youtube under
"sailing balachandra".
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 Mk1.
On 20
Ditto. Nothing in my spam folder...Maybe everyone is enjoying Easter.
On 2021-04-04 9:00 a.m., WILLIAM WALKER via CnC-List wrote:
So, I haven't gotten any emails for a couple days. None in spam or
trash. Is it just quiet?
Bill Walker
Thanks to all of the subscribers that contributed to the
From my past of peeling spinnakers, we would use a peeling strap, which
was long enough to reach from
tack to attachment point (in your case tacker). Hook it up, ease the
guy until the strap is taking the load,
drop the guy, tack the pole, re-attach guy, load up the guy, blow the
strap and winc
ng to try using an ATN tacker for
jibes. Then I can move the pole at my leisure.
-Original Message-
From: Jeff Nelson via CnC-List
Sent: Wednesday, March 10, 2021 9:45 AM
To: cnc-list@cnc-list.com
Cc: Jeff Nelson
Subject: Stus-List Re: Asymmetical Spinnaker outside jibe
I rigged mine as
y, which won't work on the
leeward side. We don't use the asym often enough to justify a sprit.
How do you "lock off" the pole?
-Original Message-
From: Jeff Nelson via CnC-List
Sent: Wednesday, March 10, 2021 9:04 AM
To: cnc-list@cnc-list.com
Cc: Jeff Nelson
Subj
es,
I find them easier and less hassle generally than trying to squeeze that
big sail through the slot...but
I've done both and they both work.
Cheers,
Jeff Nelson
On 2021-03-10 8:44 a.m., John McLaughlin via CnC-List wrote:
Please don't make such a simple thing so complicated.
At least some. Volume seems to be down, got 3 today, about 15 yesterday.
On 2021-02-12 10:16 a.m., Stu via CnC-List wrote:
Just checking – is anybody receiving digest emails with or without any
problems.
Stu
Thanks to all of the subscribers that contributed to the list to help with the
cost
I think someone is spoofing a location on you. :-)
I mostly use this one these days.
https://www.smartatlantic.ca/station_alt.html?id=halifax
I'd like to get one up and running at our club here at AYC.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 0549
On 2021-01-26 11:22 a.
Cool. I think NSC had something like this many years ago, was located
on one of the towers
of the main clubhouse that no longer exist. Lighthouse will be an
excellent choice for location.
Closer to the race venue and in largely clear air.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30
Instead of going up, why not bring the mast to you
https://www.youtube.com/watch?v=CInYj5P4evA
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 0549
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Thanks to all of the subscribers
US
can get industrial Dewalt, but no one here carries that in Can that I
know of.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 549
On 2021-01-23 10:39 p.m., cenelson via CnC-List wrote:
A rigger I know uses a cordless Milwaukee right angle drill to hoist
his crew (or for them to hoist h
Wedges are pretty easy to make out of hardwood block, just a few minutes
on the table saw
and you've got 30 or 40.
Cheers,
Jeff Nelson
Muir Caileag
C&C 30 549
On 2021-01-21 12:09 a.m., Peter McMinn via CnC-List wrote:
Risking another topic in tandem with my windlass question
1 - 100 of 151 matches
Mail list logo
