Stus-List Re: Knot vs. Splice

time. Bill Coleman Erie PA On Mon, Aug 4, 2025 at 11:27 AM Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote: > I use a knot. The fat splice makes the last foot of hoist more difficult > when you are already fighting the entire weight of the sail. > > This is what I sent t

Stus-List Re: Knot vs. Splice

Here are some ideas to incorporate soft shackles into a halyard instead of a metal shackle if you worry about weight aloft. https://l-36.com/soft_shackles.php Aug 4, 2025 11:46:55 Richard Bush via CnC-List : > I actually prefer the knot over the splice because it prevents the halyard >

Stus-List Re: Knot vs. Splice

ine breaks...; Richard 1985 C&C 37 CB: Ohio River, Mile 596; Richard N. Bush Law Offices2950 Breckenridge Lane, Suite NineLouisville, Kentucky 40220(502) 584-7255 On Monday, August 4, 2025 at 11:40:29 AM EDT, Sailmail via CnC-List wrote: "I am thinking of just using the knot

Stus-List Re: Knot vs. Splice

Allows you to end for end the halyard without cutting off a splice. Sent from my iPhone > On Aug 4, 2025, at 12:41 PM, Sailmail via CnC-List > wrote: > >  > "I am thinking of just using the knot when I replace the halyard instead of > the splice" > > The

Stus-List Knot vs. Splice

"I am thinking of just using the knot when I replace the halyard instead of the splice" The Halyard Hitch has worked well for eons. Less hassle. Some conventional knots don't work well with high modulus rope though. it would depend on the sheathing. Easy enough to test. Roy 1978 30 mk1 Your co

Stus-List Re: Knot vs. Splice

scheme for all halyards being >> solid (no fleck).  For the $$$ I have no need to pay for low stretch >> anywhere else on the boat.  Most of my other lines are quadrupled in a >> purchase system anyway. >> >> All the best, >> Josh Aug 4, 2025 11:18:21 Bill

Stus-List Knot vs. Splice

Curious what the group thinks about this subject, In particular, the Halyard. I just noticed my halyard was all torn and ragged about 8' or 10' up from the head, I am guessing from stress on the cover from the point it sits on the sheave with the first reef. (The core was still fine, I think Dyne

Stus-List Re: replacement tachometer for 3GM30 control panel

http://svjohannarose.blogspot.com/ > On Jul 31, 2025, at 9:05 AM, Hoyt, Mike via CnC-List > wrote: > > The lens on our tachometer needs replacing. Would likely be best to replace > the tachomenter > > This link shows an identical control panel > > 3GM instrumentpanel type B

Stus-List Re: replacement tachometer for 3GM30 control panel

CnC-List wrote: The lens on our tachometer needs replacing.  Would likely be best to replace the tachomenter   This link shows an identical control panel   3GM instrumentpanel type B - Yanmarspecialisten   Any ideas on where to find a tach?   Thanks   Mike Hoyt Persistence Halifax, Nova

Stus-List Re: replacement tachometer for 3GM30 control panel

timed tach and have wider selection. Ed Vanderkruk 1982 LF38 Toronto, Canada On Thu, Jul 31, 2025, 10:07 a.m. Doug Mountjoy via CnC-List < cnc-list@cnc-list.com> wrote: > I believe your engine is impulse triggered for the tach signal. Any tach > that uses an impulse, as opposed to

Stus-List Re: replacement tachometer for 3GM30 control panel

/ Douglas Mountjoy 1988 C&C LF 39 Mexico at large Transpacific 37 POYC Port Orchard, WA On Thu, Jul 31, 2025, 06:05 Hoyt, Mike via CnC-List wrote: > The lens on our tachometer needs replacing. Would likely be best to > replace the tachomenter > > > > This link shows an i

Stus-List Re: replacement tachometer for 3GM30 control panel

shattered the lens. Still works but looks like a teenager’s iphone screen. Thanks for the help! I do think used parts are mostly what is available now Mike From: John Read via CnC-List Sent: Thursday, July 31, 2025 10:32 AM To: 'Stus-List' Cc: Hoyt, Mike ; John Read Subject: St

Stus-List Re: replacement tachometer for 3GM30 control panel

Ebay? Salvage yards? Measure diameter and find identical tach? John Read Legacy III 1982 C&C 34 Noank, CT From: Hoyt, Mike via CnC-List Sent: Thursday, July 31, 2025 9:05 AM To: Stus-List Cc: Hoyt, Mike Subject: Stus-List replacement tachometer for 3GM30 control panel The

Stus-List replacement tachometer for 3GM30 control panel

The lens on our tachometer needs replacing. Would likely be best to replace the tachomenter This link shows an identical control panel 3GM instrumentpanel type B - Yanmarspecialisten Any ideas on where to find a tach? Thanks

Stus-List Re: Water pump mystery- SOLVED

Great news! > On 07/28/2025 9:16 AM EDT David Knecht via CnC-List > wrote: > > > So after replacing and checking every part of the cooling system, I finally > got a replacement raw water pump from the Netherlands (AB Marine Service) and > was able to install it last w

Stus-List Re: Water pump mystery- SOLVED

Most excellent!!! John Read Legacy III 1982 C&C 34 Noank, CT From: David Knecht via CnC-List Sent: Monday, July 28, 2025 9:16 AM To: CnC CnC discussion list Cc: David Knecht Subject: Stus-List Re: Water pump mystery- SOLVED So after replacing and checking every part of

Stus-List Re: Water pump mystery- SOLVED

So after replacing and checking every part of the cooling system, I finally got a replacement raw water pump from the Netherlands (AB Marine Service) and was able to install it last weekend. It was not a drop-in replacement for the Sherwood (as advertised) but I was able to finagle a way to ins

Stus-List Re: Great Loop in a jon boat

mile from the ramp. I used to jump off the bridge by that ramp as a kid. -- Dennis C. Touche' 35-1 #83 Mandeville, LA On Fri, Jul 25, 2025 at 9:34 AM CHARLES SCHEAFFER wrote: > Good for him. Where did he start from? > > Chuck S > > On 07/25/2025 9:09 AM EDT Dennis C. v

Stus-List Re: Diesel fuel level senders

I used this.  I'm happy.  It's just a series of resistors and magnetic reed switches.  The gage moves in steps but it is accurate enough. https://www.amazon.com/gp/aw/d/B08RBLDQTY?psc=1&ref=ppx_pop_mob_b_asin_title Josh Jul 25, 2025 12:37:36 cenelson--- via CnC-List : > I thi

Stus-List Diesel fuel level senders

I think my fuel sender has died—reads empty when tank is topped off! Before I check out the resistance, connections, etc. I thought I would ask the list for recommendations for perhaps newer technologies for fuel measurements that may be an improvement on this old but pretty reliable technology.

Stus-List Re: Great Loop in a jon boat

Good for him. Where did he start from? Chuck S > On 07/25/2025 9:09 AM EDT Dennis C. via CnC-List > wrote: > > > Is anybody else following this guy? He's trying to set the speed record for > the great loop in a jon boat. > > https://share.garmin

Stus-List Re: [EXTERNAL] Re: Great Loop in a jon boat

A guy doing the great loop in a RIB dinghy stayed at our marina a few years ago. Joe Della Barba Coquina From: Richard Bush via CnC-List Sent: Friday, July 25, 2025 9:47 AM To: CnClist Cc: Richard Bush Subject: [EXTERNAL] Stus-List Re: Great Loop in a jon boat Dennis, thanks for the heads

Stus-List Re: Great Loop in a jon boat

Dennis, thanks for the heads up! I will be interested to so how he fares!  Richard 1985 C&C 37, CB: Ohio River, Mile 584.4 Richard N. Bush Law Offices2950 Breckenridge Lane, Suite NineLouisville, Kentucky 40220(502) 584-7255 On Friday, July 25, 2025 at 09:11:11 AM EDT, Dennis C. via

Stus-List Great Loop in a jon boat

Is anybody else following this guy? He's trying to set the speed record for the great loop in a jon boat. https://share.garmin.com/robertyouens https://www.youtube.com/watch?v=62e3rTKhTos -- Dennis C. Touche' 35-1 #83 Mandeville, LA Your contributions help pay the fees associated with this lis

Stus-List Re: [EXTERNAL] Marine VHF repair

Standard Horizon finally responded to my email request after a week. My GX2150 radio is still supported for repair. Will send it to them next week. Dennis C. Touche' 35-1 Mandeville, LA *From:* Della Barba, Joe via CnC-List > *Sent:* Wednesday, July 23, 2025 6:35 AM > *To:* Stus-

Stus-List Re: Water pump mystery

You did replace the impeller, right? Bill Coleman On Thu, Jul 24, 2025 at 10:18 AM David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > Yes- this started with limited water from the exhaust and overheating. I > realize I have two separate water circulation paths. I have

Stus-List Re: Water pump mystery

– replace thermostat if the above does not yield a conclusion. John Read Legacy III 1982 C&C 34 Noank, CT From: David Knecht via CnC-List Sent: Thursday, July 24, 2025 10:18 AM To: CnC CnC discussion list Cc: David Knecht Subject: Stus-List Re: Water pump mystery Yes- this started

Stus-List Re: 3 burner propane stove on 78 C&C 30 Mk 1

That definitely looks like a hillrrange. Here is a link to sure marine, and a troubleshooting guide. https://www.suremarineservice.com/site/PDFs/manuals/Stove-Repair.pdf?srsltid=AfmBOoq8BTMyJQXKN4mEL99h0aoQeJLefodvIgqXp7gFXHfR7OpvJQX7 Douglas Mountjoy 1988 C&C Landfall 39 sv Rebecca Leah Your con

Stus-List Re: Water pump mystery

think about every aspect of the system. Dave David Knecht S/V Aries 1990 C&C 34+ New London, CT  > On Jul 24, 2025, at 8:31 AM, Rick Brass via CnC-List > wrote: > > David; > > IIRC correctly this string started with an overheating problem? > > The water comin

Stus-List Re: Water pump mystery

pieces of the zinc are partially blocking that pass of the exchanger. You will need a new end cap gasket. I don't recommend reusing the old gasket. -- Dennis C. Touche' 35-1 #83 Mandeville, LA On Wed, Jul 23, 2025 at 4:13 PM David Knecht via CnC-List < cnc-list@cnc-list.com> w

Stus-List Re: Water pump mystery

. 38mkllLa Belle Aurora 25 mkllWashington, NCSent from my iPadOn Jul 23, 2025, at 7:02 PM, Jonathan Tebbens via CnC-List wrote:https://www.westerbeke.com/parts%20manual/200144_m4-30_parts_man.pdfPg 31-32?Jon Tebbens'78 Mega 30KatherineOn Wed, Jul 23, 2025 at 5:13 PM David Knecht via CnC-List

Stus-List Re: 3 burner propane stove on 78 C&C 30 Mk 1

Is it like the one you see here? Sent from my iPhoneOn Jul 23, 2025, at 8:50 PM, Matthew Wolford via CnC-List wrote:I think they may have been Hillerange if memory serves. From: Doug Mountjoy via CnC-List Sent: Wednesday, July 23, 2025 8:33 PMTo: Stus-List Cc: Doug Mountjoy Subject: Stus-List

Stus-List Re: 3 burner propane stove on 78 C&C 30 Mk 1

I think they may have been Hillerange if memory serves. From: Doug Mountjoy via CnC-List Sent: Wednesday, July 23, 2025 8:33 PM To: Stus-List Cc: Doug Mountjoy Subject: Stus-List Re: 3 burner propane stove on 78 C&C 30 Mk 1 Send me a picture, sure marine in Seattle stocks parts for

Stus-List Re: 3 burner propane stove on 78 C&C 30 Mk 1

Send me a picture, sure marine in Seattle stocks parts for all sorts of marine stoves. Douglas Mountjoy 1988 C&C LF 39 Mexico at large Transpacific 37 POYC Port Orchard, WA On Wed, Jul 23, 2025, 17:19 Alexander Netherton via CnC-List < cnc-list@cnc-list.com> wrote: > Hello All, &

Stus-List 3 burner propane stove on 78 C&C 30 Mk 1

Hello All, I have a C&C 30 Mk 1 with a 3-burner propane stove and oven. Looks original an original feature of the boat. The owner's manual does not provide any information — mentioning only a possible alcohol stove with the same configuration. It just appears to be a rather generic basic st

Stus-List Re: Water pump mystery

https://www.westerbeke.com/parts%20manual/200144_m4-30_parts_man.pdf Pg 31-32? Jon Tebbens '78 Mega 30 Katherine On Wed, Jul 23, 2025 at 5:13 PM David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > I am in the process of installing a new water pump to see if it fix

Stus-List Re: Water pump mystery

I am in the process of installing a new water pump to see if it fixes my engine overheat problem. I still think the main problem is not enough water coming out of the exhaust so keying on the water pump. But something occurred to me today while working on it that I had not thought of before.

Stus-List Re: [EXTERNAL] Marine VHF repair

Joe, That's the number I am calling. Goes to voicemail most of the time. I suspect I will eventually get a person if I persist. Dennis C. Touche' 35-1 #83 Mandeville, LA On Wed, Jul 23, 2025, 8:39 AM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > I have a

Stus-List Re: [EXTERNAL] Marine VHF repair

I have a spare old radio too if you need one. Joe Della Barba Coquina From: Della Barba, Joe via CnC-List Sent: Wednesday, July 23, 2025 6:35 AM To: Stus-List Cc: Della Barba, Joe Subject: Stus-List Re: [EXTERNAL] Marine VHF repair Standard-Horizon fixed my GPS plotter for me some years ago

Stus-List Re: [EXTERNAL] Marine VHF repair

Standard-Horizon fixed my GPS plotter for me some years ago with no issues. Try this number: (714) 827-7600 8AM – 5PM PST Monday - Friday Yaesu USA 6125 Phyllis Drive Cypress, CA 90630 * S-H is the marine division of Yaesu. Joe Della Barba From: Dennis C. via CnC-List Sent

Stus-List Re: Marine VHF repair

the rest. Dave ex-33-2 windstar Get Outlook for iOS<https://aka.ms/o0ukef> From: Dennis C. via CnC-List Sent: Tuesday, July 22, 2025 1:58:46 PM To: CnClist Cc: Dennis C. Subject: Stus-List Marine VHF repair My Standard Horizon fixed mount VHF has devel

Stus-List Marine VHF repair

My Standard Horizon fixed mount VHF has developed a "burnt" spot on the display. Still fully functional but just looks bad. I really don't want to buy a new one and have to deal with compatibility issues with the RAM mike, etc. Mine has AIS so an equivalent replacement bumps $400. I've tried to

Stus-List Bronte Rocks Regatta

*🎉 Bronte Rocks Regatta – Two Days, Two Regattas! 🎉* *Hosted by Bronte Harbour Yacht Club, Oakville, ON* We’re excited to announce that *Bronte Rocks 2025* is *double the fun* this year! 🗓 *Day 1 – Saturday, August 30:* Join us for our *Open Regatta*, always a highlight of the summer sailing seas

Stus-List Re: Teak and Holly

t a really solid sole. Is there a way you could use the 3/8" T&H plywood over another subfloor to make up the thickness? Thank you,Daniel Haughey839401-743-0522, Please note: message attached From: David Knecht via CnC-List To: CnC CnC discussion list Cc: David Knecht Subject: Stu

Stus-List Re: Snap together holly teak marine flooring

ChuckI sent a picture to you of my sole. Slipping has never been a problem and looks great after 13 years.  I would do anything other...that's my opinion of course. Good luck to ya. Paul Hood416.799.5549 Original message From: Matthew Wolford via CnC-List Date: 2025-07-

Stus-List Re: Snap together holly teak marine flooring

Chuck: I saw this stuff at a boat show a few years ago. https://lonseal.com/products/product-details/line/LONMARINEsupregsupWOOD/ From: CHARLES SCHEAFFER via CnC-List Sent: Monday, July 21, 2025 5:44 PM To: Stus-List Cc: CHARLES SCHEAFFER Subject: Stus-List Re

Stus-List Re: Snap together holly teak marine flooring

I used Teak and holly glue-on sheets a few years ago to do my main cabin. They weren’t self sticking and the recommended glue to use had a short ‘pot life’ but the result is still stunning, now about 5 years on. Plus since some of the covered original t and h boards were the length of the main ca

Stus-List Re: Snap together holly teak marine flooring

f adhesive sheets and I would simply cover the floor boards I have. Les expensive, better for the environment, better for the feet. Chuck S > On 07/21/2025 5:05 PM EDT Dennis C. via CnC-List > wrote: > > > I tumbled to this just now. Snap together marine flooring. Wh

Stus-List Snap together holly teak marine flooring

I tumbled to this just now. Snap together marine flooring. Who knew? Now you can install snap together flooring in your boat. I've glued down PlasDek before but have been intimidated by doing an entire cabin sole because of having to cut a pattern, etc to ensure a good fit. Snap together holly

Stus-List Re: Teak and Holly

athan Tebbens via CnC-List wrote: Noahs?https://noahsmarine.com/en-us/collections/marine-plywood-and-panels/products/teak-holly On Mon, Jul 21, 2025, 10:18 AM Joel Aronson via CnC-List wrote: Maybe Exotic Lumber near Annapolis  Joel On Mon, Jul 21, 2025 at 9:48 AM David Knecht via CnC

Stus-List Re: Teak and Holly

Noahs? https://noahsmarine.com/en-us/collections/marine-plywood-and-panels/products/teak-holly On Mon, Jul 21, 2025, 10:18 AM Joel Aronson via CnC-List < cnc-list@cnc-list.com> wrote: > Maybe Exotic Lumber near Annapolis > > Joel > > > > On Mon, Jul 21, 2025 at 9:48 A

Stus-List Re: Teak and Holly

Maybe Exotic Lumber near Annapolis Joel On Mon, Jul 21, 2025 at 9:48 AM David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > I talked to Boulter and they confirmed that they can't get Teak and Holly > plywood either. They have a few sheets of 3/8" left and that

Stus-List Re: Teak and Holly

2025, at 8:58 AM, Danny Haughey via CnC-List > wrote: > > David, > Did you try Boulter Plywood up near Boston. They may have some old stock > laying around. I replaced the entire Salon soul in my Tartan 40 through > them. They even cut the pieces down for me and made my wo

Stus-List Re: Teak and Holly

that made up most of the replacement. I measured the striping and they matched it perfectly. Thank you,Daniel Haughey839401-743-0522, -- Original Message -- From: "paul.hood via CnC-List" To: CnC CnC discussion list Cc: "paul.hood" Subject: Stus-List Re:

Stus-List Re: Teak and Holly

DavidI took out my flooring and I put down what I remember as being Plasteak about 13 years ago and love it.  Haven't touched it, easy to clean and looks great. I'd do that again in a heartbeat.  Paul Hood416.799.5549 Original message From: David Knecht via CnC-List

Stus-List Re: Teak and Holly

sure all the t and h pieces line up before hand and one person just can’t do it. Cost was not much less than another t and h floor but it still looks new. Charlie Sent from the all new AOL app for iOS On Sunday, July 20, 2025, 6:05 PM, David Knecht via CnC-List wrote: I was considering

Stus-List Re: [EXTERNAL] Speaking of fuel tanks..... 29Mk1 question

nd I could spend more time to adapt the area under a bunk to properly support it and secure it.   Chuck S On 07/20/2025 10:37 AM EDT cenelson--- via CnC-List wrote:     Another thought if you are close to the aluminium welding shop:    After I removed my leaking tank and upon the

Stus-List Teak and Holly

I was considering replacing a delaminated floor panel in my boat, and the local wood supplier told me that they could not get teak and holly plywood anymore due to some import restriction. Has anyone else encountered this or know a way around it? Dave David Knecht S/V Aries 1990 C&C 34+ New L

Stus-List Re: Mast partner mast shims

Does anyone have pictures?/JohnOn Jul 20, 2025, at 2:31 PM, David Kelly via CnC-List wrote:I did my 35-2 with spartite and had no issues with mast removal. It was probably 15 years ago, but I believe that after making sure there was vaseline all over the tangs, I put the plasticine stuff between

Stus-List Re: Mast partner mast shims

collar when the mast is removed.  It’s really important to vaseline the entire inside of the collarDavid KellyFormerly Baraka C&C 35-2On 20 Jul 2025, at 18:53, Don Kern via CnC-List wrote: I have been considering replacing my hard wood shims with the Spartite

Stus-List Re: Mast partner mast shims

olted to the mast, to keep the cabin top from being lifted.  Has anyone successfully used and sealed a Spartite plug to this arrangement? Don Kern, Fireball, C&C 35-2 Bristol, RI *From:*CHARLES SCHEAFFER via CnC-List *Sent:* Wednesday, July 16, 2025 7:47 PM *To:* CNC boat owners, c

Stus-List Re: [EXTERNAL] Speaking of fuel tanks..... 29Mk1 question

Chuck S > On 07/20/2025 10:37 AM EDT cenelson--- via CnC-List > wrote: > > > Another thought if you are close to the aluminium welding shop: > > After I removed my leaking tank and upon the advice of the local shop, I > carried my old tank to the shop and

Stus-List Re: [EXTERNAL] Speaking of fuel tanks..... 29Mk1 question

Nelson1995 C&C 36XL/kcbWater Phantom Sent from the all new AOL app for iOS On Saturday, July 19, 2025, 10:54 PM, Greg Alimenti via CnC-List wrote: I went with an aluminum tank built by Florida Marine Tanks about 20 years ago.   It went well,  even added a gallon or so to the new tank.  Mea

Stus-List Re: [EXTERNAL] Speaking of fuel tanks..... 29Mk1 question

starboard scupper hose which should be replaced while you’re in there not to mention the stock gate valve it’s attached to. Greg Alimenti Cara Mia C&C 29 MkI Sent from my iPhone On Jul 19, 2025, at 4:11 PM, Karl Kuzis via CnC-List wrote:  Hello all, Speaking of fuel tanks, I am conside

Stus-List Re: Chucks article

I for one am delighted you shared with us all, will be most helpful down the line when I do the replacement! Dean BarraWind C&C 34 Halifax, NS > On Jul 19, 2025, at 4:29 PM, CHARLES SCHEAFFER via CnC-List > wrote: > > My pleasure. Helping other owners is the purpose of Stu

Stus-List Speaking of fuel tanks..... 29Mk1 question

Hello all, Speaking of fuel tanks, I am considering replacing/upgrading what I believe to be the 1977 aluminum tank on Firefly (C&C 29 Mk1) to a roto molded one. Has anyone done so and if yes, what size did you get to and what was the learning during install & use ? Karl Karl Kuzis Firefly, C&C

Stus-List Re: Chucks article

My pleasure. Helping other owners is the purpose of Stu's list. I hope my struggle and "lessons learned", help to reduce your stress with the project. My apologies to Stu for copying the list. Didn't mean to do that. Chuck S > On 07/19/2025 1:10 PM EDT Brian Davis

Stus-List Aluminum port frame gasket

Been a while since anyone posted this. MD Building Products Part 1025 Marine Rubber Weatherseal works well for the gasket for the old style aluminum frame windows. There are other equivalent products by Frost King, etc. Easily sourced at Ace, HD, Lowes, Amazon. -- Dennis C. Touche' 35-1 #83 Ma

Stus-List Re: Chucks article

Very much appreciate the share!! Brian Davis (954) 892-1128 On Sat, Jul 19, 2025, 12:41 PM CHARLES SCHEAFFER via CnC-List < cnc-list@cnc-list.com> wrote: > Hi Wade, > I attached my lessons learned. > > Chuck > > On 07/19/2025 11:25 AM EDT Wade Glew via CnC-List >

Stus-List Re: 37R Fuel Tanks Dimensions

-Fuel-Tanks-rev2-2082016.pdf Chuck > On 07/19/2025 11:37 AM EDT Languid Refiner via CnC-List > wrote: > > > Hey guys, > > The previous owner removed the fuel tank out of my 1989 37R because some of > it rusted through. > Would anyone have the

Stus-List Re: 37R Fuel Tanks Dimensions

In our 37/40 XL the fuel tank is under the aft berth below the cockpit. Ken H. On Sat, Jul 19, 2025 at 12:39 PM Languid Refiner via CnC-List < cnc-list@cnc-list.com> wrote: > Hey guys, > > The previous owner removed the fuel tank out of my 1989 37R because some > of it ruste

Stus-List 37R Fuel Tanks Dimensions

Hey guys, The previous owner removed the fuel tank out of my 1989 37R because some of it rusted through. Would anyone have the dimensions for the tank so I can get a replacement? Also, just to confirm, but I think the tank goes underneath the port bench and about a foot or two into the area undern

Stus-List Chucks article

Hi Chuck I would really appreciate a copy of your article re window replacement with VHB and Dow Wade Landfall 39 Your contributions help pay the fees associated with this list and help to keep it active. Please help by making a small contribution using PayPal at: https://www.paypal.com/paypalm

Stus-List Re: Spartite vs Mast partner mast shims

I installed Spartite on Touche' many years ago. No issues at all. The collar is wrapped with gray self fusing tape. I put a bit of LifeSeal in the track slot. Absolutely NO leakage since the installation. https://drive.google.com/file/d/0B_sb5TfIENvsLWVfd0kyMlRoWXc/view?usp=sharing&resourcekey

Stus-List Re: Mast partner mast shims

ent pulling of the mast. And make certain to reapply your lubricant of choice [Vaseline / KY, whatever] before stepping the mast. The Spartite needs to be covered to protect it from UV degradation. Brian From: Bill Coleman via CnC-List Sent: Thursday, July 17, 2025 9:28 AM To: Stus-L

Stus-List Re: General question about caulk, gaskets, and water sealing

The aluminum frames on the old-style windows screw onto the outside of the cabin. Very low-tech. All the information about VHB tape and sealant, etc., apply to the later window style, which I refer to as “go fast” windows. From: Floersch.net via CnC-List Sent: Thursday, July 17, 2025 9

Stus-List Re: General question about caulk, gaskets, and water sealing

11:00 AM, ALAN BERGEN via CnC-List wrote: Your contributions help pay the fees associated with this list and help to keep it active.  Please help by making a small contribution using PayPal at:  https://www.paypal.com/paypalme/stumurray  All contributions are greatly appreciated. Your contribu

Stus-List Re: General question about caulk, gaskets, and water sealing

d article you can find on Stu's > website: cncphotoalbum.com > > I can email my article to anyone interested also. > > Chuck S > > > > On 07/17/2025 8:42 AM EDT Hoyt, Mike via CnC-List > wrote: > > > > Nick in Vermont > > > > For a 1978 C&a

Stus-List Re: General question about caulk, gaskets, and water sealing

email my article to anyone interested also. Chuck S > On 07/17/2025 8:42 AM EDT Hoyt, Mike via CnC-List > wrote: > > > > Nick in Vermont > > > > For a 1978 C&C the windows were normally installed using gaskets and aluminum > frames. Approx 19

Stus-List Re: Mast partner mast shims

collarRichard           \ | /         (@ @) --o00--(_)--00o--416-805-3020 cell ..._/)..._/)..._/)..._/)I'd rather be sailingSent from Richard's iPhoneOn Jul 17, 2025, at 9:27 AM, Bill Coleman via CnC-List wrote:Yes and yes.Bill Coleman On Wed, Jul 16, 2025, 19:46 CHARLES SCHEAFFER vi

Stus-List Re: General question about caulk, gaskets, and water sealing

Thank you - you mean the aluminum was on the exterior or interior? I’ll take a closer look next day I’m out. Nick > On Jul 17, 2025, at 8:42 AM, Hoyt, Mike via CnC-List > wrote: > > Nick in Vermont > > For a 1978 C&C the windows were normally installed using gaskets

Stus-List Re: Mast partner mast shims

Yes and yes. Bill Coleman On Wed, Jul 16, 2025, 19:46 CHARLES SCHEAFFER via CnC-List < cnc-list@cnc-list.com> wrote: > Is Spartite the best way to shim a mast in the deck ring? Are there other > ways to shim a mast for a DIYer? > > Chuck S > Your contributions help pay the

Stus-List Re: Spartite vs Mast partner mast shims

boot saves a lot of time after. I cannot recommend this more highly. Should have done it much sooner! Mike Hoyt Persistence From: CHARLES SCHEAFFER via CnC-List Sent: Wednesday, July 16, 2025 8:47 PM To: CNC boat owners, cnc-list Cc: CHARLES SCHEAFFER Subject: Stus-List Mast partner mast shims

Stus-List Re: General question about caulk, gaskets, and water sealing

n re gaskets, etc … If you have the later frameless windows follow the advice given by Rob Abbott and others for those. There are two different beats Mike Hoyt Persistence Halifax From: Robert Abbott via CnC-List Sent: Wednesday, July 16, 2025 8:29 PM To: cnc-list@cnc-list.com Cc: Robert Abb

Stus-List Re: General question about caulk, gaskets, and water sealing

Nick: Some 34s have a hatch in the main salon; mine did not. As a result, it could get somewhat unbearable down below on hot summer days -- the opening ports made a huge difference. Something worth considering long-term. In the short term, based on your style of window, I suggest rep

Stus-List Re: General question about caulk, gaskets, and water sealing

A vent in the main salon would be pretty nice… but we’re putting in USB rechargeable clamp fans to move air through… cheaper and easier than figuring out open-able windows or another vent. > On Jul 16, 2025, at 8:57 PM, Matthew Wolford via CnC-List > wrote: > > Rob/Nick: &g

Stus-List Re: Mast partner mast shims

Our wedges / shims are definitely hardwood, and the one on the back is under significant load as our mast curves back a bit when the backstay is cranked on. Ken H. On Wed, 16 Jul 2025 at 21:28, Ken Heaton via CnC-List wrote: > We just have accurately shaped and cut pieces of wood, large o

Stus-List Re: General question about caulk, gaskets, and water sealing

Erie, PA C&C 42 Custom -Original Message----- From: Robert Abbott via CnC-List Sent: Wednesday, July 16, 2025 7:29 PM To: cnc-list@cnc-list.com Cc: Robert Abbott Subject: Stus-List Re: General question about caulk, gaskets, and water sealing Nick< My boat has two windows on e

Stus-List Re: Mast partner mast shims

st a smidge to make for a smoother mast boot.  I can't recall if they are just pine blocks or if they are some hardwood.  As I recall they were not particularly wide and could have been made out of dimensional lumber.  A 2x2 perhaps.  Maybe an oak 2x2? Josh Jul 16, 2025 19:47:20 CHARLES SC

Stus-List Re: General question about caulk, gaskets, and water sealing

nal Message- > From: Floersch.net via CnC-List > Sent: Wednesday, July 16, 2025 1:50 PM > To: Stus-List > Cc: Floersch.net > Subject: Stus-List General question about caulk, gaskets, and water sealing > > I’m a fairly new sailboat owner. > > My CNC34 (’78) needs the

Stus-List Re: General question about caulk, gaskets, and water sealing

ions are on the cnc photoalbum. All > work happens from the outside do not take apart the inside. > >> On Jul 16, 2025, at 10:50 AM, Floersch.net via CnC-List >> wrote: >> >> I’m a fairly new sailboat owner. >> >> My CNC34 (’78) needs the water seal

Stus-List Re: General question about caulk, gaskets, and water sealing

Great input! > On Jul 16, 2025, at 7:28 PM, Robert Abbott via CnC-List > wrote: > > Nick< > > My boat has two windows on each side, and one, the long one has a significant > curvature which puzzled me as to how I would keep it in place without a > frame, screws,

Stus-List Re: Mast partner mast shims

mallet and seal the seams. Works great. Matt Erie, PA C&C 42 Custom From: CHARLES SCHEAFFER via CnC-List Sent: Wednesday, July 16, 2025 7:47 PM To: CNC boat owners, cnc-list Cc: CHARLES SCHEAFFER Subject: Stus-List Mast partner mast s

Stus-List Re: Mast partner mast shims

As did I.   Fitted and tapered.   Worked great.  Dave.  (Ex 33-2 windstar)Sent from my iPhoneOn Jul 16, 2025, at 8:28 PM, Ken Heaton via CnC-List wrote:We just have accurately shaped and cut pieces of wood, large ones front, back, and two smaller ones on each side.Ken H.On Wed, 16 Jul 2025 at 20

Stus-List Re: Mast partner mast shims

We just have accurately shaped and cut pieces of wood, large ones front, back, and two smaller ones on each side. Ken H. On Wed, 16 Jul 2025 at 20:47, CHARLES SCHEAFFER via CnC-List < cnc-list@cnc-list.com> wrote: > Is Spartite the best way to shim a mast in the deck ring? Are th

Stus-List Mast partner mast shims

Is Spartite the best way to shim a mast in the deck ring? Are there other ways to shim a mast for a DIYer? Chuck SYour contributions help pay the fees associated with this list and help to keep it active. Please help by making a small contribution using PayPal at: https://www.paypal.com/pay

Stus-List Re: General question about caulk, gaskets, and water sealing

used except the curing time was a fraction of the 295 UV for obvious reasons.they don't want your vehicle in the shop for 24 to 48 hours while it cures. Maybe the VHB tape and bracing will address your curvature. Rob Abbott AZURA C&C 32 -84 Halifax, N.S. On 2025-07-16 2:50 p.m.,

Stus-List Re: General question about caulk, gaskets, and water sealing

Does your boat have the old oval windows like a C&C 33-1? -Original Message- From: Floersch.net via CnC-List Sent: Wednesday, July 16, 2025 1:50 PM To: Stus-List Cc: Floersch.net Subject: Stus-List General question about caulk, gaskets, and water sealing I’m a fairly new sail

Stus-List General question about caulk, gaskets, and water sealing

I’m a fairly new sailboat owner. My CNC34 (’78) needs the water sealing around the cabin windows re-done. It is not awful but there are certainly signs of age and deterioration and despite careful use, the spring power-washing cleaning showed that water could get through some of the edges of th

Stus-List Headsail available

I have a headsail for sale; Luff. 48’1” Foot. 19’11” Leach 44’5” It's heavy ( I'm guessing 8oz cloth?) and has a foam luff. . #6 luff tape. I'd rate it in good condition. $500 OBO + shipping Your contributions help pay the fees associated with this list and help to keep it active. Please

  1   2   3   4   5   6   7   8   9   10   >