I bought a sheet from Noah's last year for my 1981 34 - 48 by 96 and 12mm in
depth. They cut it into three pieces and shipped it cross country for just
under $200. The sheet was about $480 with tax. I was very happy with the result.
On Monday, July 21, 2025 at 07:47:23 AM PDT, Jonathan Tebbens via CnC-List
<cnc-list@cnc-list.com> wrote:
Noahs?https://noahsmarine.com/en-us/collections/marine-plywood-and-panels/products/teak-holly
On Mon, Jul 21, 2025, 10:18 AM Joel Aronson via CnC-List
<cnc-list@cnc-list.com> wrote:
Maybe Exotic Lumber near Annapolis
Joel
On Mon, Jul 21, 2025 at 9:48 AM David Knecht via CnC-List
<cnc-list@cnc-list.com> wrote:
I talked to Boulter and they confirmed that they can't get Teak and Holly
plywood either. They have a few sheets of 3/8" left and that is it. Looks like
I may be looking at synthetic (Plasteak etc.). Dave
David KnechtS/V Aries1990 C&C 34+New London, CT
On Jul 21, 2025, at 8:58 AM, Danny Haughey via CnC-List <cnc-list@cnc-list.com>
wrote:
David,Did you try Boulter Plywood up near Boston. They may have some old stock
laying around. I replaced the entire Salon soul in my Tartan 40 through them.
They even cut the pieces down for me and made my work load a little less
cumbersome! The tartan did have 2, actual rectangular pieces that made up most
of the replacement. I measured the striping and they matched it perfectly.
Thank you,Daniel Haughey839401-743-0522,
---------- Original Message ----------
From: "paul.hood via CnC-List" <cnc-list@cnc-list.com>
To: CnC CnC discussion list <CnC-List@cnc-list.com>
Cc: "paul.hood" <paul.h...@rogers.com>
Subject: Stus-List Re: Teak and Holly
Date: Sun, 20 Jul 2025 19:54:35 -0400
David I took out my flooring and I put down what I remember as being Plasteak
about 13 years ago and love it. Haven't touched it, easy to clean and looks
great. I'd do that again in a heartbeat. Paul Hood416.799.5549 --------
Original message --------From: David Knecht via CnC-List
<cnc-list@cnc-list.com>Date: 2025-07-20 6:06 p.m. (GMT-05:00)To: CnC CnC
discussion list <CnC-List@cnc-list.com>Cc: David Knecht
<davidakne...@gmail.com>Subject: Stus-List Teak and Holly
I was considering replacing a delaminated floor panel in my boat, and the local
wood supplier told me that they could not get teak and holly plywood anymore
due to some import restriction. Has anyone else encountered this or know a way
around it? Dave
David KnechtS/V Aries1990 C&C 34+New London, CTYour contributions help pay the
fees associated with this list and help to keep it active. Please help by
making a small contribution using PayPal at:
https://www.paypal.com/paypalme/stumurray All contributions are greatly
appreciated.
Your contributions help pay the fees associated with this list and help to keep
it active. Please help by making a small contribution using PayPal at:
https://www.paypal.com/paypalme/stumurray All contributions are greatly
appreciated.
Your contributions help pay the fees associated with this list and help to keep
it active. Please help by making a small contribution using PayPal at:
https://www.paypal.com/paypalme/stumurray All contributions are greatly
appreciated.
Your contributions help pay the fees associated with this list and help to keep
it active. Please help by making a small contribution using PayPal at:
https://www.paypal.com/paypalme/stumurray All contributions are greatly
appreciated.
Your contributions help pay the fees associated with this list and help to keep
it active. Please help by making a small contribution using PayPal at:
https://www.paypal.com/paypalme/stumurray All contributions are greatly
appreciated.
