Re: Stus-List C & C 36 Front Hatch Plexiglass Replacement

Don, Thanks for the heads up. I was looking at that earlier tonight and was going to ask about that. I tried to back the screws out, of course with no luck so far. Perhaps a bigger screw driver may help, or like you said, drill the old screws out, and hopefully be able to get new ones in? W

Re: Stus-List C & C 36 Front Hatch Plexiglass Replacement

I replaced mine on a 34 a few years back. The major challenge was the set screws that go through the round knobs on the top. They had to be drilled out and new holes put in. If yours works the same way and if they come out then the rest is straight forward, if not, well it was a challenge. I ju

Re: Stus-List Re-installing Rudder Post etc CC 35-II

The West System site has instructions on making a bearing from epoxy using a releasing wax on the shaft. Personally I'd try to find a bearing but it's an option. Joel Aronson On Jul 2, 2013, at 10:07 PM, "Dennis C." wrote: Alex, I had a plastics shop make new upper bearings for Touche' from D

Re: Stus-List Re-installing Rudder Post etc CC 35-II

Alex, I had a plastics shop make new upper bearings for Touche' from Delrin.  My only suggestion, make them thicker than original.  UHMW might also work. I wouldn't worry about the elevation of the top of the rudder tube. It should be fine. Dennis C. Touche' 35-1 #83 Mandeville, LA >

Re: Stus-List Black Magic C&C 34+

That's now my boat. Eric On Thu, Apr 4, 2013 at 6:55 PM, Chuck S wrote: > Anybody know anything about Ralph Racca and Black Magic, a C&C 34+? > I wanted to find out about his runner setup. > > The boat raced Newport to Block Island in May of 2008. > > Chuck > Resolute > 1990 C&C 34R > Atlantic

Stus-List More on Rudder replacement 35-II

I did some reading and it turns out, I should need a Delrin or Nyon bushing on the hull side. Do these need to be custom made? ALEX GIANNELIA CC 35-II (1974) WILL BE RENAMED ON THE HARD SINCE NOV. 2006 Toronto Ontario ___ This List is provided by th

Stus-List Re-installing Rudder Post etc CC 35-II

So, I am at the stage where I want to re-install my rudder an am looking for a bit of advice. The SS post goes up through an opening in the hull which is not continuoulsly joined to the 2nd opening in the cockpit sole, so I was wondering if greasing it will not only control friction, but also

Stus-List C & C 36 Front Hatch Plexiglass Replacement

I did mine 2x and if you are comfortable with working with goopy stuff, like SIKA 295 or GE SILICONE then it should be easy, but here are a few pointers: If you router it, see if you can keep the bit cool. Otherwise a local internal stress develops which will result in premature crazing. If po

Re: Stus-List C & C 36 Front Hatch Plexiglas Replacement

Normally we moor Calypso at Shilshole Bay Marina, E dock. This week and next she is in the yard at Seaview West (at Shilshole) receiving new bottom paint and some rudder repairs (log strike damage). The 36 I owned was known as "Windsong" from new to at least 2001. IIRC the person I sold "Wind

Re: Stus-List C & C 36 Front Hatch Plexiglas Replacement

Martin, Dora Pearl, Elliott Bay, M99. Where are you? Brad From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Martin DeYoung Sent: Tuesday, July 02, 2013 10:47 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List C & C 36 Front Hatch Plexiglas Replacement Brad, W

Re: Stus-List C & C 36 Front Hatch Plexiglas Replacement

Brad, Which C&C 36 in Seattle do you own? I saw one hauled out at CSR yesterday and back in the 90's I owned a 1980 model. TAP Plastics in the Seattle area offers the service of cutting Plexiglas and similar hatch materials to shape in case you decide to DIY. Martin Calypso 1970 C&C 43 Seattl

Stus-List Clear-Cast

We have a Samsung flat panel on Alera and use it for movies off of the Laptop and iPad...but although I have an antenna I hoist up the mast, broadcast reception usually is limited to a handful of channels and then mostly QVC or retro programs. I picked up ion the Clear Cast Antenna and it look

Re: Stus-List C & C 36 Front Hatch Plexiglass Replacement

Its an A&H! On Tue, Jul 2, 2013 at 12:58 PM, Brad Crawford wrote: > Yes, it has a long pin through the hinges. > > ** ** > > Brad > > C&C 36, Seattle > > ** ** > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Joel > Aronson > *Sent:* Tuesday, July 02, 2013

Re: Stus-List C & C 36 Front Hatch Plexiglass Replacement

Yes, it has a long pin through the hinges. Brad C&C 36, Seattle From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson Sent: Tuesday, July 02, 2013 9:25 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List C & C 36 Front Hatch Plexiglass Replacement Brad, Ye

Re: Stus-List C & C 36 Front Hatch Plexiglass Replacement

www.hhns.ca/ Hammerhead nautical systems .. can't hurt to get a quote ! Tim From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Brad Crawford Sent: Tuesday, July 02, 2013 12:19 PM To: cnc-list@cnc-list.com Subject: Stus-List C & C 36 Front Hatch Plexiglass Replace

Re: Stus-List C & C 36 Front Hatch Plexiglass Replacement

Brad, Yes, its probably an A&H. Does it have the long pin through the hinges? http://atkinshoyle.com/products/hatches-and-ports.html I did several myself. You can probably order a lense from A&H or if you have a router get the plexi from Interstate Plastics or a local source. Its a messy but e

Stus-List C & C 36 Front Hatch Plexiglass Replacement

Does anyone have any words of wisdom or advice for replacing a busted plexiglass of the front hatch on a '81 C&C 36? Would it be a Atkins and Hoyle hatch? I've been thinking of doing it myself but maybe it would be best to send it off to someone with lots of experience such as Hatchmasters or Sel

Re: Stus-List Windows again

Heating it helps even more. Bill Coleman C&C 39 animated_favicon1 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson Sent: Friday, June 28, 2013 2:06 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Windows again A sharp putty knife works. Joel 35/3

Re: Stus-List Music in Cockpit

Hi, I had a similar installation question. Since most stereos are set up for 4 Ohm impedance, I assumed that Ted connected the 8 Ohm exciters in parallel to match the stereo. It turns out this is so. See the comments I found on sailboatowners.com: http://forums.beneteau.sailboatowners.c

Re: Stus-List Music in cockpit

Very interesting. Any pictures or wiring diagrams? My old Bose speakers are doing fine, but this sounds interesting. So far, my only failure has been the wired cockpit remote -- and that failure is a royal PITA as the stereo headset is at the other end of the boat. It blew out after some new

Re: Stus-List Coaming boxes

I sewed pockets into the sides of my dodger. If you have a dodger made (or make one) just tell the canvas guy not to put windows on the side panels. You can see that I did that, but the guy only half listened. Wal ___