I replaced mine on a 34 a few years back. The major challenge was the set screws that go through the round knobs on the top. They had to be drilled out and new holes put in. If yours works the same way and if they come out then the rest is straight forward, if not, well it was a challenge. I just got a new lens cut at one of the plastics places in town using the old one as a template.
I had another issue which was more my fault. I tried Sikaflex first without the special primer which was about $60. It leaked. The second time I used Dow Corning 795 which cost less than the Sikaflex, let alone the primer, and it never leaked. Don From: Brad Crawford [mailto:bcrawf7...@comcast.net] Sent: July-02-13 9:19 AM To: cnc-list@cnc-list.com Subject: Stus-List C & C 36 Front Hatch Plexiglass Replacement Does anyone have any words of wisdom or advice for replacing a busted plexiglass of the front hatch on a '81 C&C 36? Would it be a Atkins and Hoyle hatch? I've been thinking of doing it myself but maybe it would be best to send it off to someone with lots of experience such as Hatchmasters or Select Plastics? Any thoughts would be appreciated. Thanks, Brad C&C 36, Seattle
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
