Hello there,
this is my first post on this list.
I noticed the new ClamAV 0.98.2 released and started to update the
first machines. But now it was deleted from sf!
Was there something wrong with it?
Regards, Kare
Am 06.05.2014 17:31, schrieb Joel Esler (jesler):
http://blog.clamav.net
Hello there, I'm Kare from copfilter.org
I saw this discussion about failing havp with ClamAV 0.98.4 and we
also use havp in our project for a long time.
There is a way to get havp working, until an other solution has been found.
Go to havp.config and disable clamlib and enabel the s
Hi,
We're still having the problem.
The workaround:
> To work around the trouble, you can add the "Win.Worm.Fadok-6328944-0"
to a local ign2 file in the same directory as the daily.cvd or daily.cld and
> any affected ClamAV versions will load properly.
Did not work (we t
Thanks Al,
Our servers are now updating ok!
Regards.
Maria
-Original Message-
From: clamav-users [mailto:clamav-users-boun...@lists.clamav.net] On
Behalf Of Al Varnell
Sent: viernes, 16 de junio de 2017 17:18
To: ClamAV users ML
Subject: Re: [clamav-users] Failed to load new database
Bill,
First off Thanks!
I just updated from version 2.8 to 3.2 on a Debian system. Looking at the
clamav-unofficial-sigs.log file I see:
May 15 09:22:01 INFO - Pausing database file updates for 394 seconds...
May 15 09:28:35 INFO - File removed: /usr/unofficial-dbs/si-dbs/vx.hdb
May 15 09:28
Don't know what caused the problem but all is working now.
Thanks,
Ken
On Fri, 15 May 2009, Bill Landry wrote:
> Hi Ken,
>
>> First off Thanks!
>
> You're welcome.
>
>> I just updated from version 2.8 to 3.2 on a Debian system. Looking at the
>
Hello all,
Damian Menscher whom wrote the milter_watch program has updated the script
to work with the new clamav-milter. The code can be found at:
http://www.itg.uiuc.edu/itg_software/milter_watch/
Thanks,
Ken
___
Help us build a comprehensive
I have installed Qmail with Clamav (on Slackware Linux 12.1) from some
scripts I'd written and used the same script multiple times - point is,
nothing changes as to how I build everything. Last night I did the Qmail
toaster routine and Clamav (it's the next to most recent release)
__
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml
Hello all,
I'm trying to use the whitelist file without much success. Could some of
you post your "clamav.whitelist" file so I can see an good example of what
I should be doing?
Thanks alot,
Ken
___
Help us build a comprehensi
of what I
should be doing?
Thanks again,
Ken
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml
that the OP simply
wanted to see the file structure; i.e., how it was constructed. I did
not get any impression that he was actively mining for your data. Then
again, I am not paranoid. By the way, and I might be incorrect, I do
not believe that Clamav displays an actual example of the file
anywher
Ted,
This is what I'm looking for but I've been doing about the same thing with
just a couple of entry's in my file and when I
start the clamav-milter up I get:
Starting Sendmail milter plugin for ClamAV: clamav-milterERROR: Failed to
compile regex '' in whitelist
wrote:
Ted,
This is what I'm looking for but I've been doing about the same thing with
just a couple of entry's in my file and when I
start the clamav-milter up I get:
Starting Sendmail milter plugin for ClamAV: clamav-milterERROR: Failed to
compile regex '' in wh
ycos.com]
> To: u...@angelfire.com
Anyway it looks like this entry will stop messages that have
"angelfire.com" in the from line? How can we get this changed. It looks
like angelfire.com is real site.
Help is Appreciated!
Thanks,
Ken
_______
How can we get this changed. It looks like angelfire.com is
real site.
Help is Appreciated!
Thanks,
Ken
_______
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml
_______
Stephen,
I see a new lib - libclamav2, and the new version of clamav is available
on volatile now. What precautions or config updates should I do before
updating this on a running mail server.
Thanks,
Ken
___
Help us build a comprehensive ClamAV
I found this error in the freshclam log file today on 2 of my servers.
--
Received signal: wake up
ClamAV update process started at Fri Mar 9 16:00:05 2007
main.cvd is up to date (version: 42, sigs: 83951, f-level: 10, builder
Hello,
I've come across a problem when the system archives the clamav logs each
day. It sends a SIGHUP signal to the clamav-daemon and that restarts the
logs for the clamav-daemon program but it stops recording the detailed log
info about virus it stopped or other information that one might
What does the -e or --external do?
Thanks,
Ken
On Fri, 16 Mar 2007, Andreas [iso-8859-1] M?rdter wrote:
> On Friday 16 March 2007 00:11, John Fleming wrote:
> > >> - And the clamav log is free of errors and indicated that the database
> > >> is updated appro
Stephen,
Any idea when the 0.90.2 will be out for etch and sarge?
Thanks,
Ken
On Wed, 18 Apr 2007, Stephen Gran wrote:
> On Tue, Apr 17, 2007 at 07:44:53PM -0600, Gary V said:
> > Now that etch is stable, will the sarge volatile clamav packages continue
> > the upgrade path
Ken
> >
> > On Wed, 18 Apr 2007, Stephen Gran wrote:
> >
> > > On Tue, Apr 17, 2007 at 07:44:53PM -0600, Gary V said:
> > > > Now that etch is stable, will the sarge volatile clamav packages
> > > > continue
> > > > the upgrade path?
&
Hello,
Today we upgraded our DNS server which is Debian Bind9 ver 1:9.3.4-2etch1.
We also upgraded our ClamAV software to the new Version: 0.91.1-0volatile1
that came out today. Just happened that both came with new version today.
Anyway... We are getting this message in the FreshClam logs
that is running freshclam?
>
> On the host running freshclam, what does your /etc/resolv.conf look like?
>
> Lyle
>
> [EMAIL PROTECTED] wrote:
> > Hello,
> >
> > Today we upgraded our DNS server which is Debian Bind9 ver 1:9.3.4-2etch1.
> > We also upgra
Stephen,
Any idea when Clamav 0.93 will be released for Debian?
Thank You Stephen
Ken
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://lurker.clamav.net/list/clamav-users.html
ks* on one of the retries.
> I tried manually connecting to port 80 and it worked fine
>
> So strictly speaking, I don't have a problem, just a minor nuisance.
> Still, for best efficiency on the mirrors, I would suggest checking out
> why this behaviour occurs.
>
> Her
Just checking out this new mail server I want to make sure this is getting
posted. Haven't seen any traffic for last couple days.
Thanks,
Ken
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/su
Stephen,
Any idea when debian version 0.93.3 volatile is coming out?
Thanks,
Ken
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml
Ken
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml
of these categories should be used and which
ones will cause problems with users incoming e-mail.
Thanks,
Ken
___
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml
Hi,
For a couple of days now, I have some performance issues with clamav. I
use clamav on my email server to scan incoming traffic. I faced the
problem yesterday with the "Trojan.Agent-49425" before clamav was
considering it as a virus. The scanning time of this 35KB zipped file w
)
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de Török Edwin
Envoyé : mardi 16 septembre 2008 13:59
À : ClamAV users ML
Objet : Re: [Clamav-users] Scanning performance issues on some files
On 2008-09-16 14:49, [EMAIL PROTECTED] wrote:
> Hi,
>
>
&g
Hi, I've just seen the workaround made by mailscanner. Super
mailscanner!!! It doesnt solve anything with this clamav issue to filter
the attachements before calling clamd :)
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de Randal, Phil
Envo
I have opened a bug #1188
Thanks a lot for your help
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de Török Edwin
Envoyé : mardi 16 septembre 2008 14:07
À : ClamAV users ML
Objet : Re: [Clamav-users] Scanning performance issues on some files
On 20
re 2008 15:19
À : ClamAV users ML
Objet : Re: [Clamav-users] Scanning performance issues on some files
I have been having the same problem and was even more puzzled when
scanning the rogue file on my test system didn't exhibit the same
problem (it scanned in a fraction of a second as against
TED] De la part de aCaB
Envoyé : mardi 16 septembre 2008 19:56
À : ClamAV users ML
Objet : Re: [Clamav-users] Scanning performance issues on some files
Hi all,
This is been worked around with a signature update (daily 8262).
A definitive (in-the-code) solution will be inculded in 0.94.1
Thanks every
new 0.95 version I get the following:
---
# milter_watch -d local:/var/run/clamav/milter.ctl
Submit_message called with """
KkgrSCQhRUxJRi1UU0VULVNVUklWSVROQS1EUkFETkFUUy1SQUNJRSR9NylDQzcpXlAoNDVYWlBc
NFtQQU
Rich,
I just went into /etc/init.d/clamav-milter and took out some of the
--pidfile stuff. This is on a Debian system. Here is a copy of my
/etc/init.d/clamav-milter file - it works for me, don't know if it is the
way it shou
hello everyone,
please dont ask why but is it possible to run clamAV without using the official virus databases? i tried it but my clamd wont start because the daily-DB is missing.the main "why?"-cause is because clamAV consuming more and more RAM over last years and using some 0-day-dat
Hi Ged,
thanks - found it! For all those looking for the answer: https://lists.clamav.net/pipermail/clamav-users/2019-August/008382.html
Greetings
G.W. Haywood via clamav-users schrieb am 09.09.2019 18:34:
Hi there,
On Mon, 9 Sep 2019, cla...@script-test.de wrote:
> ... is it possible
ls. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______
Clamav-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/clamav-users
-
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
____
Okay, i apologize for such a basic question, but i guess i've been running
clamav 'blind' for some time now!
i installed clamav via the instructions quite a long time ago. i run it via
qmail-scanner. clamd is running, and messages are scanned by clamscan. so
where does cl
ystem offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
___
Clamav-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/clamav-users
rforce/loadprog.html
___
Clamav-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/clamav-users
At 10:47 AM 1/9/2004, Daniel J McDonald wrote:
On Fri, 2004-01-09 at 12:18, Jim Maul wrote:
> > On Fri, 9 Jan 2004 [EMAIL PROTECTED] wrote:
> >
> > > i installed clamav via the instructions quite a long time ago.
> > i run it via
> > > qmail-scanner. clamd is
t email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
__
il is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
___
Clamav-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/clamav-users
he Fast Software Configuration Management System offering
advanced branching capabilities and atomic changes on 50+ platforms.
Free Eval! http://www.perforce.com/perforce/loadprog.html
_______
Clamav-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/clamav-users
.perforce.com/perforce/loadprog.html
___
Clamav-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/clamav-users
---
Infected files: 1
Time: 0.026 sec (0 m 0 s)
As you can see, clamscan didn't find a virus in the mail message, but
clamdscan did!
I've been following this thread and I'm trying to get my head around the
different options for running clamav with qmail-scanner-queue.pl:
1- Call clamsca
At 09:38 AM 1/13/2004, Christopher X. Candreva wrote:
I take that back - it didn't work. clam complained the gmp library was not
compatable.
Solaris 8 on UltraSparc, gcc 3.3.2 , gmp 4.1.2
Last I tried compileing gmp with CFALGS blank. gmp built OK, but clamav now
says in configure:
checkin
Follwing problem with (devel-20040108, clamav-milter version '0.66c'):
After several days I eventually get the following messages in clamd.log
(about 200 times):
Sat Jan 17 20:38:01 2004 -> ERROR: ScanStream: accept() failed. Sat Jan
17 20:40:20 2004 -> ERROR: accept() failed.
but in this state clamav/clamd is
clearly quite unusable :-((
since there are quite a few of these problems popping up in the last days
- any idea what can be done to fix or at least improve this situation?
In case it's important we are on Debian Woody 3.0r2 and Kernel 2.4.24 here.
Sola
Hi!
I'm running sendmail 8.12.10 with
ClamAV version 'clamd / ClamAV version devel-20040108', clamav-milter
version '0.66c'
And in gerneral I'm very happy with it. There is only one problem (and I
reported it already several times!!). Sometimes clamd crashes and just
is?
>
> Jeffrey
>
ClamAV did find one SCO.A this afternoon. But the rate has clearly
dropped. Odd.
grep "30 Jan" quarantine.log | grep Worm.SCO | wc -l
2478
slowed a little, but not much.
Paul Theodoropoulos
http://www.anastrophe.com
-
> > I'm running sendmail 8.12.10 with
> > ClamAV version 'clamd / ClamAV version devel-20040108',
> clamav-milter
> > version '0.66c'
> >
> > And in gerneral I'm very happy with it. There is only one
> problem (and
>
apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
___
Clamav-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/clamav-users
Hello!
I have the problem that clamd sometimes crashes. I use ClamAV version
0.66 with clamav-milter version '0.66m' and sendmail 8.12.10 on Solaris
8.
In the clamd.log file I found the following messages:
Tue Mar 2 02:45:38 2004 -> SelfCheck: Database status OK.
Tue Mar 2
e kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
___
Clamav-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/clamav-users
s.o
../clamscan/getopt.o -L/export/home/wolfgang/dev/clamav-devel-20040301/libclamav
/export/home/wolfgang/dev/clamav-devel-20040301/libclamav/.libs/libclamav.so -lz -lbz2
/usr/local/lib/libgmp.so -lpthread -lsocket -lnsl -lresolv -R/usr/local/lib
ld: fatal: file dazukoio_compat12.o: wrong ELF machine t
y Concepts, Inc.
PO Box 3567
Tualatin, OR 97062
http://www.nsci.us/
Voice: (503) 293-7656
Fax: (503) 885-0770
---
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=13
uvscan is detecting zipped/passworded bagle zip's as
Worm.Bagle.Gen-zippwd. Any ideas as to how they might be doing this?
-Eric
On Wed, 3 Mar 2004, Lucas Albers wrote:
> Tomasz Papszun said:
> >WE ASK USERS TO NOT SUBMIT naked zip files IF their contents is DETECTED
> >a
tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
___
Clamav-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/clamav-users
email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______
Clamav-users mailing list
[EMAIL PROTE
Hi!
I use ClamAV devel-20040302, clamav-milter version 0.67j and sendmail
8.12.10 on Solaris 8.
I should get a ZIP file from a friend with seven photos as content
(about 7MB) and it was rejected by the milter:
Mar 9 10:23:53 webhost sendmail[18370]: [ID 801593 mail.info]
i29AHrYO018370: Milter
Nothing died. The clamav-milter and clamd are still running!
Any idea?
Wolfgang
> -Ursprüngliche Nachricht-
> Von: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Im Auftrag
> von Nigel Horne
> Bereitgestellt: Dienstag, 09. März 2004 13:02
> Bereitgestellt in: Cla
[mailto:[EMAIL PROTECTED] Im Auftrag
> von Jafar Aliev
> Bereitgestellt: Dienstag, 09. März 2004 19:42
> Bereitgestellt in: Clamav
> Unterhaltung: [Clamav-users] Milter rejects with 451
> Betreff: Re: [Clamav-users] Milter rejects with 451
>
>
> C> I should get a ZIP f
President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
___
Clamav-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/clamav-users
d by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
___
Clama
to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______
Clamav-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/clamav-users
Hi!
I run clamav 0.70rc with sendmail-8.12.9 and sometimes I get the
message:
Milter: data, reject=451 4.7.1 Please try again later
Clamd is running - nothing crashed!!! After that messsage I receive
normally my mails and they are scanned by clamav!!!
I have seen that there was a discussion
> On Wed, 2004-03-24 at 05:39, Clamav wrote:
> > I run clamav 0.70rc with sendmail-8.12.9 and sometimes I get the
> > message:
> > Milter: data, reject=451 4.7.1 Please try again later
> > Clamd is running - nothing crashed!!! After that messsage I receive
> &g
sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
___
Clamav-users
Hi!
I'm using sendmail with clamav-milter and the latest stable version
0.70.
I used a german website which provides dummy viruses for checking clamav
(http://www.heise.de/security/dienste/emailcheck/).
I realised that the following dummy viruses pass clamav:
Virus Bagle.Q
Virus Net
I'm using clamav with Solaris 8 and have a problem with the latest
stable version with freshclam - what could be the reason for this?
# /usr/local/bin/freshclam
ClamAV update process started at Mon May 24 11:34:26 2004
Reading CVD header (main.cvd): OK
Downloading main.cvd [*]
ERROR: Verific
d on the hottest thing ever to hit the market... Oracle 10g.
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id149&alloc_id66&op=click
_______
Clamav-users mailing list
[EMAIL PROTECTED]
https://lists.s
Hello!
We are using clamav and clamav-milter on our mail gateway together with
sendmail and it works perfectly - I'm really happy with it and think it
is a great piece of software.
I would be interested in differences between clamav and commercial
available anti virus software fo
> -Ursprüngliche Nachricht-
> Von: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Im Auftrag
> von Steven Stern
> Bereitgestellt: Mittwoch, 02. Juni 2004 18:54
> Bereitgestellt in: Clamav
> Unterhaltung: [Clamav-users] Comparison clamav with other
> anti viru
I am not quite sure how to notify you guys of this responsibly outside of
the mail list. Unfortunately, attempting to submit this via the virus
submit channel says it is already recognized by clamav. clamscan --mbox
picks up the virus and clamdscan --mbox does not. This is running 0.74
and
On Tue, 20 Jul 2004, Stephen Gran wrote:
> > the mail list. Unfortunately, attempting to submit this via the virus
> > submit channel says it is already recognized by clamav. clamscan --mbox
> > picks up the virus and clamdscan --mbox does not. This is running 0.74
>
&g
Hi!
I'm running clamav on Solaris 8 and with the latest development version
I get the following messages when I run: ./configure --enable-milter
checking resolv.h usability... no
checking resolv.h presence... yes
configure: WARNING: resolv.h: present but cannot be compiled
configure: WA
Hi!
Installed 0.75.1 last week (on the mailgateway with Solaris 8 and
clamav-milter) and realized today that a lot of viruses included in ZIP
files were passing through.
Are there any known problems with the 0.75.1 version and ZIP archives??
Just before I installed the newest development version
>
> On Oct 12, 2004, at 06:04, Nigel Horne wrote:
> > It is likely that you have a buggy zlib. What version do you have?
On Tue, 12 Oct 2004, Doug Hardie wrote:
> Looks like 1.1.3 but difficult to tell for sure. Its part of the base
> system. For the last few weeks, clam
right-click copy-paste wget?
On Tue, 12 Oct 2004, david thompson wrote:
> I would like to download clamav. however using adblock in mozilla stops
> the ability to download.
>
> Are there any other places to download from - other than sourceforge.
/lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
On Tue, 12 Oct 2004, Scott Rothgaber wrote:
> Doug Hardie wrote:
>
> > have encountered quite a few situations in the last month where clamav
> > just stopped working properly and had to be manually restarted.
>
> I had the same problem with spamass-milter a while bac
> On Oct 12, 2004, at 12:17, Nigel Horne wrote:
> > Use the --advisory flag of clamav-milter.
>
> Can this be done with clamd???
>
The short answer to your question is no, not presently. clamd is a virus
scanner not a mail filter. With the exception of scanners which im
> Somewhere between Exim and Cyrus, selected emails are disappearing. I don't know
> what the criterion is for the emails coming up missing, so I thought I'd start with
> ClamAV.
>
> When Clam decides an email contains a virus, what does it (Clam) do with the email.
> Do you really want to keep all the viruses people send you?
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
dvisory
came out. Should I hand-upgrade to 1.1.4 anyway? Does Clam static or
dynamic link to libz?
--
Eric Wheeler
Vice President
National Security Concepts, Inc.
PO Box 3567
Tualatin, OR 97062
http://www.nsci.us/
Voice: (503) 293-7656
Fax: (503) 885-0770
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
gt; > are disappearing. I don't know what the criterion
> > is for the emails coming up missing, so I thought
> > I'd start with ClamAV.
> > >
> > > When Clam decides an email contains a virus, what
> > does it (Clam) do with the email. Does it
: (503) 293-7656
Fax: (503) 885-0770
___
http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
On Wed, 29 Sep 2004, Dennis Peterson wrote:
>
> Anyone got a plan for when encrypted zip'd jpeg files start showing up?
>
> dp
> ___
> http://lists.clamav.net/cgi-bin/mailman/listinfo/clamav-users
>
Either start a &quo
Does anyone know how many viruses we should be catching? I seem to
remember having >40k and now we're at ~25k with 0.80rc3. Ideas?
>> Database correctly reloaded (25384 viruses)
-Eric
___
http://lists.clamav.net/cgi-bin/mailman/l
On Fri, 1 Oct 2004, Ryan Moore wrote:
>
> Yea, same count here. They probably have another file in their database
> directory or something.
>
This is what we have. Should some of 'em be removed?
ca3a946c1c51338c17424e66095263fa /var/lib/clamav/clamav
Hi All;
I've followed qmailrocks.org's site to a "t" and got clamav working
properly, however, the clamav.log file does not update.
It's still at 0 bytes and at the original date when I "touched" the file.
The permissions seem right, and the configuration in
> Hi All;
>
> I've followed qmailrocks.org's site to a "t" and got clamav working
> properly, however, the clamav.log file does not update.
>
> It's still at 0 bytes and at the original date when I "touched" the file.
>
> The permission
On Mon, 18 Oct 2004, Steve Basford wrote:
> Just came across this:
> http://www.securiteam.com/securitynews/6E00G2ABFY.html
>
> Bit hard to say if this would impact ClamAV?
Does clam skip the decompression if the local/global header contain a zero
filesize? It sounds like from the
1 - 100 of 2079 matches
Mail list logo
