Rich,
I just went into /etc/init.d/clamav-milter and took out some of the
--pidfile stuff. This is on a Debian system. Here is a copy of my
/etc/init.d/clamav-milter file - it works for me, don't know if it is the
way it should be.
-----------------------------------------------------------------------------------
#!/bin/sh
### BEGIN INIT INFO
# Provides: clamav-milter
# Required-Start: $syslog
# Should-Start: clamav-daemon
# Required-Stop:
# Should-Stop:
# Default-Start: 2 3 4 5
# Default-Stop: 0 6
# Short-Description: ClamAV virus milter
# Description: Clam AntiVirus milter interface
### END INIT INFO
# edit /etc/default/clamav-milter for /options
PATH=/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/sbin/clamav-milter
DESC="Sendmail milter plugin for ClamAV"
BASENAME=clamav-milter
CLAMAVCONF=/etc/clamav/clamav-milter.conf
#DEFAULT=/etc/default/clamav-milter
SUPERVISOR=/usr/bin/daemon
SUPERVISORPIDFILE="/var/run/clamav/daemon-clamav-milter.pid"
SUPERVISORARGS="-F $SUPERVISORPIDFILE --name=$BASENAME --respawn"
CLAMAVDAEMONUPGRADE="/var/run/clamav-daemon-being-upgraded"
[ -x "$DAEMON" ] || exit 0
#[ ! -r $DEFAULT ] || . $DEFAULT
. /lib/lsb/init-functions
if [ ! -f "$CLAMAVCONF" ]; then
log_failure_msg "There is no configuration file for clamav-milter."
log_failure_msg "Please either dpkg-reconfigure $DESC, or copy the example
from"
log_failure_msg "/usr/share/doc/clamav-milter/examples/ to $CLAMAVCONF and
run"
log_failure_msg "'/etc/init.d/clamav-milter start'"
exit 0
fi
to_lower()
{
word="$1"
lcword=$(echo "$word" | tr A-Z a-z)
echo "$lcword"
}
is_true()
{
var="$1"
lcvar=$(to_lower "$var")
[ 'true' = "$lcvar" ] || [ 'yes' = "$lcvar" ] || [ 1 = "$lcvar" ]
return $?
}
ucf_cleanup()
{
# This only does something if I've fucked up before
# Not entirely impossible :(
configfile=$1
if [ `grep "$configfile" /var/lib/ucf/hashfile | wc -l` -gt 1 ]; then
grep -v "$configfile" /var/lib/ucf/hashfile > /var/lib/ucf/hashfile.tmp
grep "$configfile" /var/lib/ucf/hashfile | tail -n 1 >>
/var/lib/ucf/hashfile.tmp
mv /var/lib/ucf/hashfile.tmp /var/lib/ucf/hashfile
fi
}
add_to_ucf()
{
configfile=$1
ucffile=$2
if ! grep -q "$configfile" /var/lib/ucf/hashfile; then
md5sum $configfile >> /var/lib/ucf/hashfile
cp $configfile $ucffile
fi
}
ucf_upgrade_check()
{
configfile=$1
sourcefile=$2
ucffile=$3
if [ -f "$configfile" ]; then
add_to_ucf $configfile $ucffile
ucf --three-way --debconf-ok "$sourcefile" "$configfile"
else
[ -d /var/lib/ucf/cache ] || mkdir -p /var/lib/ucf/cache
cp $sourcefile $configfile
add_to_ucf $configfile $ucffile
fi
}
slurp_config()
{
CLAMAVCONF="$1"
if [ -e "$CLAMAVCONF" ]; then
for variable in `egrep -v '^[[:space:]]*(#|$)' "$CLAMAVCONF" | awk '{print
$1}'`; do
if [ "$variable" = 'DatabaseMirror' ]; then
if [ -z "$DatabaseMirror" ]; then
for i in `grep ^$variable $CLAMAVCONF | awk '{print $2}'`; do
value="$i $value"
done
else
continue
fi
elif [ "$variable" = 'IncludePUA' ]; then
if [ -z "$IncludePUA" ]; then
for i in `grep ^$variable $CLAMAVCONF | awk '{print $2}'`; do
value="$i $value"
done
else
continue
fi
elif [ "$variable" = 'ExcludePUA' ]; then
if [ -z "$ExcludePUA" ]; then
for i in `grep ^$variable $CLAMAVCONF | awk '{print $2}'`; do
value="$i $value"
done
else
continue
fi
elif [ "$variable" = 'VirusEvent' ] || [ "$variable" = 'OnUpdateExecute'
] || [ "$variable" = 'OnErrorExecute' ]; then
value=`grep ^$variable $CLAMAVCONF | head -n1 | sed -e s/$variable\ //`
else
value=`grep ^$variable $CLAMAVCONF | head -n1 | awk '{print $2}'`
fi
if [ -z "$value" ]; then
export "$variable"="true"
elif [ "$value" != "$variable" ]; then
export "$variable"="$value"
else
export "$variable"="true"
fi
unset value
done
fi
}
make_dir()
{
DIR=$1
if [ -d "$DIR" ]; then
return 0;
fi
[ -n "$User" ] || User=clamav
mkdir -p -m 0755 "$DIR"
chown "$User:$User" "$DIR"
}
slurp_config "$CLAMAVCONF"
[ -n "$User" ] || User=clamav
if [ -n "$Example" ]; then
log_failure_msg "$DESC is not configured."
log_failure_msg "Please edit $CLAMAVCONF and run '/etc/init.d/clamav-milter
start'"
exit 0
fi
if [ -z "$PidFile" ]; then
PIDFILE=/var/run/clamav/clamav-milter.pid
else
PIDFILE="$PidFile"
fi
if [ -z "$MilterSocket" ]; then
SOCKET=local:/var/run/clamav/clamav-milter.ctl
else
SOCKET="$MilterSocket"
fi
case "$SOCKET" in
/*)
SOCKET_PATH="$SOCKET"
SOCKET="local:$SOCKET"
;;
*)
SOCKET_PATH=`echo $SOCKET | sed -e s/local\://`
# If the socket is type inet: we don't care - we can't rm -f that later :)
;;
esac
if is_true "$Foreground"; then
if [ ! -x "$SUPERVISOR" ] ; then
log_failure_msg "Foreground specified, but $SUPERVISOR not found"
exit 0
else
RUN_SUPERVISED=1
SUPERVISOR_EXEC="$DAEMON"
fi
fi
if [ -z "$RUN_SUPERVISED" ] ; then
if [ -f "$PIDFILE" ]; then
PID=`pidofproc -p $PIDFILE $DAEMON`
RUNNING=$?
else
PID=`pidofproc $DAEMON`
RUNNING=$?
fi
else
[ -e "$SUPERVISORPIDFILE" ] && PID=`sed 's/[^0-9]//g' $SUPERVISORPIDFILE`
fi
[ "$PID" = '1' ] && unset PID
[ -n "$User" ] || User=clamav
[ -n "$DataBaseDirectory" ] || DataBaseDirectory=/var/run/clamav
make_dir "$DataBaseDirectory"
if [ "${SOCKET_PATH#inet}" = "${SOCKET_PATH}" ]; then
make_dir $(dirname "$SOCKET_PATH")
chown $User $(dirname "$SOCKET_PATH")
fi
make_dir $(dirname "$PIDFILE")
chown $User $(dirname "$PIDFILE")
case "$1" in
start)
OPTIND=1
if [ -n "$PID" ]; then
PID=`echo $PID | sed 's/[^0-9]//g'`
if kill -0 $PID; then
log_failure_msg "$DAEMON already running"
exit 1
fi
fi
if [ -e "$CLAMAVDAEMONUPGRADE" ] && [ "$RESTART_AFTER_CLAMD" = 'yes' ]; then
touch $CLAMAVDAEMONUPGRADE.milter-restart
log_warning_msg "clamd may be required to run $DAEMON, clamav-milter will
be restarted by clamav-daemon"
exit 0
fi
if [ -z "$RUN_SUPERVISED" ] ; then
log_daemon_msg "Starting $DESC" "$BASENAME"
su "$User" -p -s /bin/sh -c ". /lib/lsb/init-functions && start_daemon
$DAEMON" > /dev/null
ret=$?
else
log_daemon_msg "Starting $DESC" "$BASENAME (supervised)"
$SUPERVISOR $SUPERVISORARGS -X "$SUPERVISOR_EXEC"
ret=$?
fi
if [ $ret = 0 ] && [ "$USE_POSTFIX" = 'yes' ] && [ "${SOCKET_PATH#inet}" =
"${SOCKET_PATH}" ]; then
cnt=0
until [ -e "$SOCKET_PATH" ] ; do
cnt=`expr "$cnt" + 1`
if [ "$cnt" -gt 15 ]; then
break
fi
sleep 2
done
if [ -e "$SOCKET_PATH" ]; then
chmod g+w $SOCKET_PATH
chgrp postfix $SOCKET_PATH
else
log_warning_msg "Socket not created. Investigate"
fi
fi
log_end_msg $ret
;;
stop)
OPTIND=1
log_daemon_msg "Stopping $DESC" "$BASENAME"
if [ -n "$PID" ]; then
PID=`echo $PID | sed 's/[^0-9]//g'`
kill -15 -"$PID" 2>/dev/null || true
ret=$?
sleep 2
if kill -0 "$PID" 2>/dev/null; then
ret=$?
log_progress_msg "Waiting . "
cnt=0
while kill -0 "$PID" 2>/dev/null; do
ret=$?
cnt=`expr "$cnt" + 1`
if [ "$cnt" -gt 15 ]; then
kill -9 -"$PID"
ret=$?
break
fi
sleep 2
log_progress_msg ". "
done
fi
else
if [ -z "$RUN_SUPERVISED" ] ; then
killproc -p $PIDFILE $DAEMON
ret=$?
else
killproc -p $SUPERVISORPIDFILE
ret=$?
fi
fi
if [ -n "$ret" ]; then
log_end_msg $ret
else
log_end_msg $?
fi
[ -e "$SOCKET_PATH" ] && rm -f $SOCKET_PATH
[ -e "$PIDFILE" ] && rm -f $PIDFILE
;;
force-reload | restart)
$0 stop
sleep 2
$0 start
;;
status)
status_of_proc "$DAEMON" "$NAME"
exit $?
;;
*)
log_failure_msg "Usage: $0 {start|stop|restart|force-reload|status}" >&2
exit 1
;;
esac
exit 0
-----------------------------------------------------------------------------------------------------
On Thu, 30 Apr 2009, Gomes, Rich wrote:
> Does anyone have a fix for this?
>
> -----Original Message-----
> From: Gomes, Rich
> Sent: Tuesday, April 28, 2009 10:40 AM
> To: ClamAV users ML
> Subject: RE: [Clamav-users] [ClamAV-users] HELP!unrecognized option
> `--pidfile=/var/run/clamav-milter/clamav-milter.pid'
>
> Thanks, this is a new install of OS and Sendmail\Clam so there is no
> clamav-milter file in/etc/sysconfig
>
>
>
> One last ( I hope) thing:
>
> All mail is refused:
>
> Milter (clamav): error connecting to filter: Connection refused by
> /var/clamav/clmilter.socket
> Milter (clamav): to error state
> Milter: initialization failed, temp failing commands
>
> Permissions on the directory:
>
> drwxr-xr-x 2 clamav clamav 4096 Apr 28 06:35 clamav
>
> (These are the same as the old server, which is running without issue, albeit
> an older version)
>
> What else could cause this?
>
>
> Rich
>
> -----Original Message-----
> From: clamav-users-boun...@lists.clamav.net
> [mailto:clamav-users-boun...@lists.clamav.net] On Behalf Of James Kosin
> Sent: Tuesday, April 28, 2009 10:27 AM
> To: ClamAV users ML
> Subject: Re: [Clamav-users] [ClamAV-users] HELP!unrecognized option
> `--pidfile=/var/run/clamav-milter/clamav-milter.pid'
>
> Noel Jones wrote:
>> Gomes, Rich wrote:
>>> Line referring to the pid has been removed from the conf file but it
>>> still throws the same error Root owns the files, (same as the old
>>> mail server)
>>
>> Do NOT use the --pidfile *command line* option when starting
>> clamav-milter! Please read the clamav-milter man page.
>>
>> You may need to change your init script.
>>
>> -- Noel Jones
>> _______________________________________________
>
>
> Also, look for clamav-milter in /etc/sysconfig, if using any Fedora or RedHat
> release. Clamav-Milter no longer accepts command line arguments and all
> parameters should be passed in the NEW clamav-milter.conf file located in /etc
>
> If you have the file 'clamav-milter' in /etc/sysconfig, either rename/remove
> or comment out the CLAMAV_FLAGS part of the configuration file!!! And please
> EDIT the new /etc/clamav-milter.conf file to properly setup clamav-milter.
>
> James
>
> _______________________________________________
> Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
> http://www.clamav.net/support/ml
>
_______________________________________________
Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net
http://www.clamav.net/support/ml
