Kern, if it would help I can set up a VM that you can ssh to work on the real
hardware. It may well be too late to try now, as time is so short, perhaps
when you return?
-- Michael
-Original Message-
From: Kern Sibbald <[EMAIL PROTECTED]>
Subj: Re: [Bacula-users] An ide
m=$snapshot filename= > /tmp/snapshot-Odoo_8_snps'
>
>__Martin
>
>--
>Check out the vibrant tech community on one of the world's most
>engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>__
Juan Pablo Lorier schrieb:
> bscan -m -v -c /etc/bacula/bacula-sd.conf -V Peliculas0001 /dev/nst0
try adding "-s"
for me that works.
HTH
Michael
--
uberSVN's rich system and user administration capa
Dear Bacula
I can't configure Bacula on my server running Ubuntu 6.10. The error that I
get is "Unable to find Gnome 2 installation"
I am new to Bacula and so please excuse any obvious oversight.
The command that run is as follows:
[EMAIL PROTECTED]:/home/michael/Michaels_Stuf
On Wed, February 7, 2007 7:51 am, Don MacArthur wrote:
> Thanks Arno, you always seem to have very helpful insights.
I agree. Arno is knowledgeable, helpful, and seemingly always in good
cheer. Bravo, Arno!
--
This message has been scanned for viruses and
dangerous content by MailScanner, and
0KB/s,
depending on if it's backing up many small files (slow) or large files
(fast).
Michael
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
-
Ta
t;sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
.
.
.
As I mentioned, this used to all work flawlessly, so I am at a loss as
to what I can try next. We did upgrade the box from FC3 to FC6 within
the last few months, but the backups were still running fine after the
upgrade, this tr
down to a little over 800M.
Michael
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceFor
p? I think the unload to the wrong slot and the
invalid slot messages may be important, but I am not sure just what
condition that is indicating.
I am running current CVS, as of yesterday, in order get the
encryption patch. Thanks for any help someone might have.
-- Michael
ons became so scrambled.
It just started happening after the cancellation confusion after the
hung network backup last weekend. If anyone has insight on where it
might be confused or how to surgically modify the database to
un-confuse I am open to trying it. For the moment I will continue
to
it got in
this state, I would appreciate it. For now I will muddle through
the long backups and manually rerun the failed/blocked jobs after I
can restart things to get it to an unblocked state. Thanks...
-- Michael
---
obs lost? Will the SD have to be stopped and the jobs
rerun? For the moment I may let them run out and see what happens.
-- Michael
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay
On Sun, 25 Feb 2007, Michael Brennen wrote:
> Sometime last night the director died. The last entry in
> working/log is this:
>
> 25-Feb 08:02 archive-dir: Error: open mail pipe
> /path/to/bacula/bsmtp -h localhost -f "(Bacula)
> [EMAIL PROTECTED]" -s "
e-sd: 3995 Bad autochanger "unload slot 1, drive 0":
ERR=Child exited with code 1
Results=/dev/nst0: No medium found
Storage Element 1 is Already Full
=
Reviewing the technotes file, I wonder if this wasn't broken when
the virt
d.
Thanks
Michael
On 2/1/07, Michael Bates <[EMAIL PROTECTED]> wrote:
Dear Bacula
I can't configure Bacula on my server running Ubuntu 6.10. The error that
I get is "Unable to find Gnome 2 installation"
I am new to Bacula and so please excuse any obvious oversight.
The
uld be the best way to implement it (possibly avoiding to create
a pool/storage for each server...)?
best regards,
Michael
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you&
On Mon, 26 Feb 2007, Kern Sibbald wrote:
> On Sunday 25 February 2007 09:42, Michael Brennen wrote:
>> Hello again,
>>
>> The long weekend backups started running Friday night. This is a 4
>> drive 60 slot autochanger. The bacula version is "archive-dir
>>
On Mon, 26 Feb 2007, Kern Sibbald wrote:
> On Monday 26 February 2007 03:17, Michael Brennen wrote:
>> I have a resolution to the mount problems of which I wrote last
>> night, in which bacula attempts to unload a phantom tape from an
>> empty drive before loading the needed
Michael Brennen wrote:
> That's what I get for working with things I don't fully understand. :)
Heh... "working with things I don't fully understand" is the story of my
life.
--
This message has been scanned for viruses and
dangerous content by MailScanner,
Fausto Barros de Sá Teles wrote:
> Has anyone there ever used Bacula for backin up to Sony LTO-2/LTO-3
> tapes?
> I have to implement Bacula but I'm not sure if it works with this
> kind of tape.
I'm using it on two servers, one with LTO-2 and one with LTO-3, and it
works great.
--
T
able to show that the drive was failing, regardless of tape
or application.
As always, I appreciate the help I see on this list.
Mike Morgan
Michael Morgan wrote:
> I seem to be having trouble writing large backups to tape from bacula.
> It has been working just fine for months, and with
On Fri, March 9, 2007 2:12 am, HAWKER, Dan (external) wrote:
> This has baffled me. The previous night's report at my remote
> site has stated that a backup was successful without errors! Any ideas
> why backup has worked on Thursday night when all week (Monday to
> Wednesday) the tape dri
hanks,
Michael
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
htt
like the from address "[EMAIL PROTECTED]" when Bacula
is trying to send mail. Try changing the "%r" entry in the "mailcommand"
line of your bacula-dir.conf with a valid email address.
- -Proto
- --
Michael Proto| SecureWorks
Unix Administrator |
PGP
h drive), you could add a Storage override directive to the
incremental schedule to use only one of those 2 drives.
- -Proto
- --
Michael Proto| SecureWorks
Unix Administrator |
PGP ID: 5D575BBE | [EMAIL PROTECTED]
***
I will check the readme.txt again to see if it mentions anything similar
for Linux systems, which I am running at the server -- that's why the
device names are /dev/sg2 and /dev/nst0.
BTW: Thanks for being so nice about helping, Robert. I showed that I
read the documentation and searched Google b
Ooops! I just replied to the wrong message. Sorry about that. :)
Robert, you still don't have license to be nasty. :)
Mike
On Wed, 14 Mar 2007 21:15:07 -0700, "Michael Toscano" <[EMAIL PROTECTED]>
said:
> I will check the readme.txt again to see if it mentions anyt
Sure did. I restarted them all.
Thanks for the reply!
Mike
On Thu, 15 Mar 2007 20:49:53 -0500, "Erich Prinz" <[EMAIL PROTECTED]>
said:
>
> Simple question...
>
> Did you restart the SD daemon after modifying your SD file to use the
> LTO device instead of the HDD?
>
> Erich
>
>
>
> On M
On Fri, March 16, 2007 11:05 am, Alan Davis wrote:
> /rant mode on/
Awesome response, Alan. It sure has been nasty around here recently!
Michael
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be cl
If you feel the person doesn't deserve your
help, don't help.
Michael
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
-
Take Surveys. Earn Cash. In
On Fri, March 16, 2007 11:36 am, Brian Debelius wrote:
> Email me directly, and I will try and help you, just be warned that I am
> new to bacula also, but I do have a working windows configuration.
Bravo, Brian!
--
This message has been scanned for viruses and
dangerous content by MailScanner
cate to do the encryption?
4. Will I be required to enter the passphrase upon backing up data as
well? For automation reasons, this is not something I want.
Thanks for any ideas you may have.
Michael
-
Take Surveys. Earn Cash.
gt; But i'm not sure if it is fully usable.
>
Here's an old mailing list entry regarding a success report for a DLT-S4
autochanger:
http://www.mail-archive.com/bacula-users@lists.sourceforge.net/msg17227.html
- -Proto
- --
Michael Proto| SecureWorks
Unix
something?
>
I take it you have separate partitions for /boot, /usr, /home, etc?
Bacula won't cross filesystem boundaries by default, so if you want to
back-up separate filesystems you must explicitly list them in your
Fileset record. Try adding:
File =
; blank password in C:\Documents
and Settings\All Users\Application Data\Bacula\bacula-fd.conf and
everything seems to be working fine here.
- -Proto
- --
Michael Proto| SecureWorks
Unix Administrator |
PGP ID: 5D575BBE | [EMAIL PROTECTED]
**
ew months but I remember this sort of thing used to cause me tons of
headaches when backing-up large (disk-wise) servers.
- -Proto
- --
Michael Proto| SecureWorks
Unix Administrator |
PGP ID: 5D575BBE | [EMAIL PROTECTED]
***
enabled by-default in 2.0.4.
- -Proto
- --
Michael Proto| SecureWorks
Unix Administrator |
PGP ID: 5D575BBE | [EMAIL PROTECTED]
***
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.7 (FreeBSD)
iD8DBQFGCCMKOLq/wl1XW74RA
r Certificate but neither work. I've tried specifying only the cert
for PKI Keypair but the daemon dies with openssl wondering where it can
find the key.
Does anybody know of such a way to specify the cert used in the
encr
Michael Havas wrote:
> Hi everyone,
>
> Following the advice of Pierre Bernhardt in a thread started by me
> entitled "Password Protection on Restore", I've decided to use data
> encryption to not allow everyone who can use bconsole to perform a
> restor
On Tue, March 27, 2007 4:34 pm, Daniel Moros wrote:
> bacula-dir.conf
> [...]
> Storage {
> Name = pequena
I think the Name above should be dds3, not pequena
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
-
this Job
resource. Is there a way to have a "Run" job ONLY run when the other
monthly full backup is scheduled to run? Or would I need to create
another Job resource for all of my clients, under another schedule, and
remove these full backups from my WeeklyCycle sche
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I neglected to mention that I have a 2nd tape drive that I plan to use
with this clone job, so there shouldn't be an issue with both running
simultaneously.
Michael Proto wrote:
> As part of my monthly backup cycle, I am required to tak
Greetings,
I have been evaluating Bacula for the School District I work for as a
backup option for our Windows 2003 Servers. I like many of the features
Bacula has compared to other solutions. I have been testing with 2.0.3
with the director on a linux box, a storage daemon on a Windows 2003
>
>> -Original Message-
>> From: [EMAIL PROTECTED] [mailto:bacula-users-
>> [EMAIL PROTECTED] On Behalf Of Michael Gerszewski
>> Sent: Friday, March 30, 2007 11:27 AM
>> To: bacula-users
>> Subject: [Bacula-users] Windows Client, VSS Issues, 2.0.3?
>>
&g
rom the same
system without any problems.
I am using both a PKI Keypair and a master cert to do the encryption and
just the PKI Keypair to do the decryption.
Thank you very much for your help with this,
Michael
-
Take S
hose aren't
causing any conflicts.
Thanks again. A great community here.
Mike
Robert Nelson wrote:
>
>> -Original Message-
>> From: [EMAIL PROTECTED] [mailto:bacula-users-
>> [EMAIL PROTECTED] On Behalf Of Michael Gerszewski
>> Sent: Friday, March 30, 200
can see, this is precisely the same error I was receiving with
Bacula Client version 2.0.2.
Any help is much appreciated,
Michael
>
> On Friday 30 March 2007 21:24, Michael Havas wrote:
>> Hi everyone,
>>
>> I'm using bacula with encryption with Windows Client version
eed to
redirect stderr to this file instead of stdout?
Anyone have any ideas what might be causing these errors or how I can go
about debugging this unusual (and while not critical, still very
annoying) problem?
Thanks!
Michael Proto
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.7 (FreeBSD
On Mon, April 2, 2007 3:06 pm, Arno Lehmann wrote:
>
> Under unix/linux, getting the necessary information together would be
> rather simple, under windows I have no idea how I would do this.
Lots of clicking and rebooting, like everything else in Windows. ;-)
--
This message has been scanned
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Drew Tomlinson wrote:
> I run Bacula v1.38 on my home network. Both the director and the client
> with which I am having trouble are running FreeBSD 6.1. Things worked
> flawlessly until I changed my firewall from ipfw2 to pf, backups fail
> inter
Robert Nelson wrote:
> Okay great, I think this should give me something to work with. I'll try
> and repro it here.
>
>> -Original Message-
>> From: [EMAIL PROTECTED] [mailto:bacula-users-
>> [EMAIL PROTECTED] On Behalf Of Michael Gerszewski
>>
of the
process). Hopefully these errors will provide some insight into why or
how this seems to happen when using the bacula FD client, but not the
Microsoft backup client.
Thanks
Mike
Michael Gerszewski wrote:
> On a whim, I decided to stop my SQL Server running on this FD. The
> ba
estigating this issue.
Arno Lehmann wrote:
> Hi,
>
> On 4/3/2007 12:04 AM, Michael Proto wrote:
...
> I built and packaged all the Bacula Linux clients myself (so they all
> pull from the same set of config files for quick installation), and I
> used the following compile-time flag
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Getting closer on this, but not quite there yet. More info below
Arno Lehmann wrote:
> Hi,
>
> On 4/9/2007 10:23 PM, Michael Proto wrote:
> Sorry I'm so late in replying back to this thread, I've had a number of
> long-run
a=no mon-sun at 1:05
...
}
- -Proto
Marc Schiffbauer wrote:
> Hi!
>
> Does anybody know if there is a way to set spooldata=yes for
> interactive backups run from bconsole?
>
> TIA
> -Marc
- --
Michael Proto| SecureWorks
Unix Administrator |
PG
On Fri, April 13, 2007 2:44 am, Arno Lehmann wrote:
> Note that I think arkeia is nearly unusable, though :-)
I couldn't agree more.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--
No Jobs running.
No Terminated Jobs.
*
Thanks for any help you can offer,
--
Michael FIG <[EMAIL PROTECTED]>, PMP
MarkeTel Multi-Line Dialing Systems, Ltd.
Phone: (306) 359-6893 ext. 528
-
This SF.net email
Martin Simmons writes:
>It depends on the size of the database. You could try setting
>log_slow_queries and long_query_time in your my.cnf to see which queries are
>causing the problems.
Thanks for your reply. I'll use your advice to look into this further.
--
Michael FIG <
:48 bacula-dir: Begin pruning Jobs.
> 22-Apr 13:48 bacula-dir: No Jobs found to prune.
> 22-Apr 13:48 bacula-dir: Begin pruning Files.
> 22-Apr 13:48 bacula-dir: No Files found to prune.
> 22-Apr 13:48 bacula-dir: End auto prune.
>
>
>
>
> Regards
>
>
Sysadmin Worldsoft wrote:
> I try to backup 193GB with bacula 2.0.3 on a tape library Powervault
> 124T with LTO3.
>
> The backup take 7 hours to terminate. The specification for PV 124T is
> "Supports maximum native transfer rates of 288GB/hr (LTO-3)"
>
> Any idea for this problem ?
>
I find
John Drescher wrote:
> Are you using spooling on the backup with 7 million files?
Yes, John... all my jobs are spooled to disc then to tape.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--
Michael Nelson wrote:
> I find that the overall throughput for my gigabit-connected LTO-3
> jukebox seems to depend more on the makeup of the files being backed up
> than anything.
>
Sorry, but that is confusing language, and could be misinterpreted easily.
What I should have
No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
>
>
>
>
> ___
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
>
Command = "/home/bacula/etc/bacula/scripts/mtx-changer %c %o
%S %a 1"
}
Hope this helps!
- -Proto
Julien Cigar wrote:
> Hello Michael,
>
> I've the same tape drive here and I have sometimes write errors. I think
> that I made something wrong in the configuration but I
When you want to access the autochanger, you talk to /dev/sg3. When you
want to talk to the tape drive (as in using btape) you want to pass it
the drive device, ie: /dev/nst0.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
--
Petcher, Daniel wrote:
After editing my bacula-*.conf files, I get this same error:
[EMAIL PROTECTED]:~/bacula/bin# ./btape -c bacula-sd.conf /dev/st0
Tape block granularity is 1024 bytes.
btape: butil.c:286 Using device: "/dev/st0" for writing.
27-Apr 16:20 btape: 3301 Issuing autochanger "loa
Daniel, here's my bacula-sd.conf file which works fine with my Quantum
Superloader3 with a single LTO-3 drive:
#
# Bacula Storage Daemon Configuration file
#
# For Bacula release 1.38.11 (28 June 2006) -- redhat
#
Storage { # definition of myself
Name = nts-sd
SD
Petcher, Daniel wrote:
> Aha! There's my problem: I neglected to edit the Autochanger section's
> "Changer Command =" line to reflect my own server's directory structure.
>
> It seems to be working now.
Cool! Sometimes just having a working config to study helps.
---
Joseph Wright wrote:
> Running 'status jobs' shows that all jobs ended with errors.
> However, there were no logs to tell me what happened.
>
You certain there are no logs? Normally there is a log file in bacula's
working directory (as defined in bacula-dir.conf). The log file should
be
Item 1: Add "Reload" Functionality to Storage/File Daemon
Origin: Michael Short <[EMAIL PROTECTED]>
Date: 2 June 2007
Status: Non-existent
What: The Bacula Storage Daemon and Bacula File Daemon need "reload"
functionality similar to the Bacula Director. A
Hi,
is anyone using a Tandberg T40 library (40 slots, 2xLTO3, SCSI) with bacula?
Regards
Michael
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of
Michel Meyers wrote:
> If others want to nominate Bacula as well, here's the link to do so:
>
> http://sourceforge.net/awards/cca/nomination.php?group_id=50727
>
I did it.
--
The music business is a cruel and shallow money trench, a long plastic hallway
where thieves and pimps run free, and g
Stephan Wendl wrote:
>
> Not sure if anyone had noticed but OCM Webmin has a module for bacula
> configuration/management
>
I have installed it and played with it some, but somehow at least for me
it's easier to just vi the config files. I find the gui approach to be
awkward and clunky in c
Are you sure that /dev/sg0 is in fact the autochanger device and not the
tape drive?
For instance on my server (from dmesg output):
(scsi3:A:4): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
Vendor: CERTANCE Model: ULTRIUM 3 Rev: 1856
Type: Sequential-Access
Brian Debelius wrote:
> Why does bacula ask for a slot number to mount, when I mount my VXA
> autochanger? It seems to me, that bacula should load whatever tape it
> feels appropriate automatically when the autochanger is loaded. I
> usually just pick some random number to load, assuming that
hen I "update slots" and "mount".
This works, and works a whole lot more cleanly than the equivalent
procedure used to work under 1.39 (I am on 2.02 now).
Should I be doing this a different way?
Michael
--
The music business is a cruel and shallow money trench, a long plastic h
d when the next Job starts, Bacula will know to re-read the tape label
to find out what tape is mounted. If you want to be able to use the
drive with another program (e.g. mt), you must use the unmount command
to cause Bacula to completely release (close) the device."
Thanks
Michael
Kyle Marsh wrote:
> I've tried looking in the manual for help, but I've found that while
> the manual is fairly comprehensive, it's not remarkably accessible;
> that is, while I'm sure my answers are probably in there somewhere,
> I'm not at all sure that I could find them, so I come to you for hel
media, but
others will know that much better than me.
-- Michael
-
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Down
hould be expected to be identical,
but that is not what is happening now. Is there a way to make that
happen?
Thanks much,
-- Michael
-
Using Tomcat but need to do more? Need to support web services, security?
Get stuff
eeded to help sort it out.
I am running CVS as of a few days ago. I just updated CVS and noticed
that a number of files have changed; I may try upgrading today and
watching results tonight.
Thanks again, this is nice software.
-- Michael
Current 'stat storage=Q47' comma
tive with just
the public key, the FD will not start; it gives an error:
"Unable to read private key from file: ERR=error:0906D06C:PEM
routines:PEM_read_bio:no start line"
Anyone have any ideas what to fix here?
-- Michael
---
can back up to and restore from the drive, but bacula
doesn't know how to manipulate the changer because it doesn't think there
is a changer there.
Thanks
Michael
-
Using Tomcat but need to do more? Need to support
On Mon, September 11, 2006 12:33 pm, Michael Nelson said:
> Changer Device = /dev/sg0
Yes, I put that in for testing. But the device really is /dev/sg2, and
the tests have all been done with /dev/sg2 as "Changer Device&qu
Although I had recompiled the kernel and enabled CONFIG_SCSI_MULTI_LUN and
rebooted, apparently it didn't boot the right kernel. Now cat
/proc/scsi/scsi shows a medium changer:
nsb:/etc/bacula# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: LSILOGIC Model:
(FC1), with a 23-slot, 2 drive
> autochanger and mysql5.
>
I have seen the same thing and posted to that effect last week. I am
running CVS, and last week's post would have been about 1.39.20.
-- Michael
-
be mounted. I ran
another job that wants another tape, and it worked without problem. I've
posted some info below, glad to post more as helpful.
-- Michael
Device status:
Autochanger "Q47" with devices:
"Drive-0" (/dev/nst0)
"Drive-1" (/dev/nst1
A quick followup on the mount request mail I just sent...
Using the console I unmounted and remounted that volume, and it still asks for
a mount. Current status is below.
-- Michael
Running Jobs:
JobId Level Name Status
On Wednesday 13 September 2006 05:16 pm, Arno Lehmann wrote:
> Hi,
>
> On 9/13/2006 11:59 PM, Michael Brennen wrote:
> > A quick followup on the mount request mail I just sent...
> >
> > Using the console I unmounted and remounted that volume, and it still
> > ask
ore I work with
Bacula the more I come to respect its depth.
-- Michael
Device status:
Autochanger "Q47" with devices:
"Drive-0" (/dev/nst0)
"Drive-1" (/dev/nst1)
"Drive-2" (/dev/nst2)
"Drive-3" (/dev/nst3)
Device "FileStorage&
Thanks again, one of these days I will be in a position to help answer someone
else's questions. :-/
--
-- Michael
-
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with
the bacula manual? Perhaps you have and I am coming in late on
a thread, ignore if you've done all this.
--
-- Michael
-
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done
t apply to
mtx-changer each time I install bacula, this for a Breece Hill Q47.
Perhaps it will be of use to others as well for other changers, at
least as a reference. Standard disclaimers apply; if you bork your
script you can undo the patch. :)
-- Michael--- mtx-changer 2006-09-05 12:
'/opt/csw/sbin/tapeinfo -f %c |grep
> TapeAlert|cat'"
> }
In my autochanger definition, "Changer Command", "Changer Device"
and "AutoChanger" are only in the Autochanger {} definition,
examples below.
-- Michael
Autochanger {
Name = Q
automatic
tape hardware compression. Would it be better to turn off tape
compression with encrypted data?
-- Michael
-
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with
Frank Sweetser wrote:
> On Sun, Sep 17, 2006 at 07:36:46PM -0500, Michael Brennen wrote:
>
>> I enabled encryption on 1.39.23 using the FD keys on Friday.
>> During a full backup over the weekend I noticed that the 35/70 DLT
>> tapes seemed to hold less than I have s
ll hurt
to hit each drive every time a job is run.
-- Michael
-
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Downloa
On Monday 18 September 2006 03:37 am, Arno Lehmann wrote:
> On 9/18/2006 6:30 AM, Michael Brennen wrote:
> > It appears that the only way to turn off hardware tape compression
> > is to have RunBeforeJob execute a script that turns off h/w tape
> > compression with 'mt&
others would have to answer whether or not there might be a locking conflict
referencing the same SCSI device in the two autochanger configurations.
--
-- Michael
-
Take Surveys. Earn Cash. Influence the Future of IT
Jo
(the changer).
If it's not an Adaptec, I would look for a similar feature. Until the
controller sees both devices, Linux doesn't have a chance.
Michael
--
This message has been scanned for viruses and
dan
1 - 100 of 927 matches
Mail list logo
