I have a resolution to the mount problems of which I wrote last
night, in which bacula attempts to unload a phantom tape from an
empty drive before loading the needed tape. I went back to the
latest released source, 2.0.2, and all is working again.
The changer is a 4 drive, 60 slot unit that has been working well
for months. Essentially the problem is that the latest svn source
tries to unload a non-existent tape from a drive before it tries to
load the real tape from the changer. 2.0.2 works correctly. The
following errors were in working/log after the failed operations on
current svn source. Drive 0 was empty when these were attempted.
=================================================
25-Feb 19:06 archive-dir: Using Volume "FNI0002" from 'Scratch' pool.
25-Feb 19:06 archive-sd: 3307 Issuing autochanger "unload slot 1, drive 0"
command.
25-Feb 19:08 archive-sd: 3995 Bad autochanger "unload slot 1, drive 0":
ERR=Child exited with code 1
Results=/dev/nst0: No medium found
Storage Element 1 is Already Full
25-Feb 19:08 archive-sd: 3307 Issuing autochanger "unload slot 1, drive 0"
command.
25-Feb 19:10 archive-sd: 3995 Bad autochanger "unload slot 1, drive 0":
ERR=Child exited with code 1
Results=/dev/nst0: No medium found
Storage Element 1 is Already Full
=================================================
Reviewing the technotes file, I wonder if this wasn't broken when
the virtual autochanger changes were made a few days ago.
-- Michael
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
