Hi there!
I've got several problems with my on-(ASRock K7VT2-)board sound
controller. It's a VIA8235. It's just a stereo output, a stereo input
and a microphone in. The motherboard has also a MIDI-Connector. I have a
mpu401 and mpu401-uart module loaded for this. I'm using Debian Etch
(testing) wi
Hi ,
I have an Abit KV7 Motherboard , with VT8237 audio .
At the boot time I get :
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
With both ALSA 0.9.8 and ALSA 1.0.2c , with the d
Hi the list.
I'm new on ALSA (I know, OSS is bad for me ;c).
I'm playing w/ that on a FX43G mainboard (SK43G shuttle box) which is
based on the VT8237 chipset. On it, we can find this multimedia controller :
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235 AC97 Audio C
On Thu, 26 Feb 2004, Baptiste SIMON wrote:
> Hi the list.
>
> I'm new on ALSA (I know, OSS is bad for me ;c).
>
> I'm playing w/ that on a FX43G mainboard (SK43G shuttle box) which is
> based on the VT8237 chipset. On it, we can find this multimedia controller :
>
> 00:11.5 Multimedia audio co
Jaroslav Kysela wrote:
Try add ac97_quirk=0 or ac97_quirk=4 option here.
nothing more... :c/
options snd-via82xx dxs_support=1 ac97_quirk=4
or
options snd-via82xx dxs_support=1 ac97_quirk=0
--
Baptiste SIMON
aka BeTa
Administrateur système GNU/Linux & Unix
A la recherche d'emploi
http://www.e-g
On Thu, 26 Feb 2004, Baptiste SIMON wrote:
> Jaroslav Kysela wrote:
> > Try add ac97_quirk=0 or ac97_quirk=4 option here.
>
> nothing more... :c/
>
> options snd-via82xx dxs_support=1 ac97_quirk=4
> or
> options snd-via82xx dxs_support=1 ac97_quirk=0
I forgot to say, that you need readjust the
Jaroslav Kysela wrote:
I forgot to say, that you need readjust the mixer settings after this
step and reinsert the snd-via82xx module so these options will take
effect.
what do you mean by "readjust the mixer settings" ?
note: the "master" channel has no effect on the global sound power. only
Jaroslav Kysela wrote:
I forgot to say, that you need readjust the mixer settings after this
step and reinsert the snd-via82xx module so these options will take
effect.
what do you mean by "readjust the mixer settings" ?
With ac97_quirk you might have 'Master' and 'Headphone' controls. Please,
t
Jaroslav Kysela wrote:
It's not related. Can you give me contents of
/proc/asound/card0/codec97#0/* files?
of course ;c)
$ cat /proc/asound/card0/codec97#0/ac97#0-0
0-0/0: Realtek ALC650 rev 3
Capabilities :
DAC resolution : 20-bit
ADC resolution : 18-bit
3D enhancement : Realtek 3D Ste
Baptiste SIMON wrote:
$ cat /proc/asound/card0/codec97#0/ac97#0-0
0-0/0: Realtek ALC650 rev 3
(...)
SPDIF In Status : Not Locked
$ cat /proc/asound/card0/codec97#0/ac97#0-0+regs
0:00 = 5980
(...)
0:7e = 4720
I hope it'll help.
It cannot provide any more help ? I've bought my box yesterday... I
On Thu, 26 Feb 2004, Baptiste SIMON wrote:
> Baptiste SIMON wrote:
> > $ cat /proc/asound/card0/codec97#0/ac97#0-0
> > 0-0/0: Realtek ALC650 rev 3
> (...)
> > SPDIF In Status : Not Locked
> >
> > $ cat /proc/asound/card0/codec97#0/ac97#0-0+regs
> > 0:00 = 5980
> (...)
> > 0:7e = 4720
> >
> > I
At Thu, 26 Feb 2004 15:56:35 +0100,
Baptiste SIMON wrote:
>
> Jaroslav Kysela wrote:
> > It's not related. Can you give me contents of
> > /proc/asound/card0/codec97#0/* files?
>
> of course ;c)
>
> $ cat /proc/asound/card0/codec97#0/ac97#0-0
> 0-0/0: Realtek ALC650 rev 3
>
> Capabilities
Jaroslav Kysela wrote:
> No, I'm sorry, I haven't time to analyze the ALC650 registers right
> now. Perhaps, make a bug-report, so we will not forget to your issue.
> Thanks.
there is no problem Jaroslav. Thanks for the time you've given to this
problem.
Takashi Iwai wrote:
try to turn 'External
Baptiste SIMON wrote:
I've tested every solution w/ the classical way... I'll try the 2.6.2
kernel to have an older version of alsa drivers. I've heard about
friends who where not lucky w/ the new one too. Then I'll be able to
make a better bug report :cb
alsa-0.9.7 allow sound only on rear spea
Baptiste SIMON wrote:
ok, I'll make a bug report on sf.net... I hope I could help :c/
for alsa on a VIA8237 based mobo (FX43G), plugged on a Shuttle SK43G...
and having only rear speakers working, in one special state only, you
can find this bug :
http://bugtrack.alsa-project.org/alsa-bug/bug_vi
Hi,
I have an ECS L7VTA2 motherboard with integrated sound
and I can't use it with ALSA properly. First of all,
in the mixer, the PCM is only a switch, so it can be
only on or off; the master can be changed but it does
not have any effect. I read the documentations but I
have not found the solution
Hi,
I'm using the onboard sound card in my Shuttle SK41g which is a via8233
chipset.
I was using the via driver and it worked nicely and smoothly. But, when I
switched over to use Alsa and the OSS emulation for recording sound on
/dev/dsp , the sound on playback from my dvd player now has interm
Adam C. Brown wrote:
I'm using the ALSA 1.0rc2 drivers along with MythTV, however I've run into
two sound problems:
First, when I play a DVD, the sound (and video) tend to 'jump' and sound
'garbled'. I don't run into this problem when I use the kernel driver for
2.4.23 (via82cxxx_audio), that is,
I'm using the ALSA 1.0rc2 drivers along with MythTV, however I've run into
two sound problems:
First, when I play a DVD, the sound (and video) tend to 'jump' and sound
'garbled'. I don't run into this problem when I use the kernel driver for
2.4.23 (via82cxxx_audio), that is, the sound and video
Hi,
The problem I am having is that the "sound rate" changes and is not correct
for all applications.
Using the same hardware running Mandrake 9.1 everything is good. I am able to
run either Mandrake 9.1 or 9.2 on the same hardware so if you have any tests
for me to run then I can.
The scenar
Hi,
İ have an asus a7v8x-x mobo and the nasty via8235 southbridge chip on
it. i am using ALSA 0.9.7a and Linux 2.4.22 with low latency patch
(Linux Fron Scratch 4.1 )...
it is not working stable i have some noise problems especially while
running xmms. When modprobing i see the the fameous m
At Tue, 23 Sep 2003 22:08:26 -0300,
Ivo Santos Cavalcante Carneiro wrote:
>
> I can't make my AD1980 work, on ASUS A7V8X-X. I'm using alsa 0.9.6,
> compiled alsa-driver, alsa-lib and alsa-utils, following the
> instructions, and received these error messages qhem loading the modules:
>
> *
>
I can't make my AD1980 work, on ASUS A7V8X-X. I'm using alsa 0.9.6,
compiled alsa-driver, alsa-lib and alsa-utils, following the
instructions, and received these error messages qhem loading the modules:
*
PCI: Found IRQ 4 for device 00:11.5
IRQ routing conflict for 00:11.5, have irq 9, want irq
Hi there,
no this time, I havn't got a prblem!
I just pached my kernel from 2.5.46 to 2.5.49. I
activatetd the build in alsadriver for the via82xx and it workes without any
problems!! It sound better then using windowsdrivers.
I had had problems with this chipset (vt8235 ind
the manual
24 matches
Mail list logo
