Lindy,
If you need to back up your mksysb's into TSM, I suggest that you
run a mksysb to a local filesystem and then backup the file to TSM.
Regards, Jason Barkes.
Mustard Design Consultants - www.mustard-design.co.uk
-Original Message-
From: Crawford, Lindy [mailto:[EMAIL PROTEC
hi Lindy
Theoraticly you should be able to do it. use mksysb to backup to optical
device. Then use DD to copy the file to a diks and use TSM to back it up.
But still i don´t understand why you should wana back up mksysb, when you
can´t boot form a TSM tape on AIX, then it would make your mksysb
Hi
I have tried the below command - but was unsuccessful as
ADSM would not allow me to change the state of the Cartridge.
ADSM complains about an internal ERROR.
ERROR MESSAGE " ANR2032E Command failed - internal server error
detected. "
Thks
Sean
-Original Message-
From: Robert Ouzen
Are you able to export and import the data for the nodes. If you export the
data for the client from the old domain and import into the new domain the
data should be copied to the new storage pool.
Marco Bianchi <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 06/02/2002
19:34:46
Please respond to "AD
Hi Brown
Yes TSM Can do this
You can create 2 Policy Domain´s 1 for your DomainA and the second one for
DomainB. Then you can create 2 seprete
administrators who can only manage clients within there domains. the only
user who has the rights to manage both domains is
the System admin. and if you
Thanx all for the answers, I'll try to Export/Import the nodes
MB
At 16.00 06/02/2002 -0500, you wrote:
>-Original Message-
>From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
>Marco Bianchi
>Sent: Wednesday, February 06, 2002 12:35 PM
>To: [EMAIL PROTECTED]
>Subject:
Hi all,
I was wondering what is the setting in the dsm.opt to make a client retry
it's connection, if for example one of the two IP adresses to connect to the
TSM server fail.
> met vriendelijke groeten, regards et salutations,
>
> Finn Leijnse
> ISES/31 - Central Data Storage Management
> Shell
Hi Lindy,
What you would like to do is not that very difficult. Like Jason
Barkes said;
make a mksysb to a local filesystem and backup/archive is to TSM. We
do it like that, but we use NIM to restore a MKSYSB over the network.
An other option is mkcd, which is inc
Just a word of warning. We had a very unsuccessful install of a 3583 with
TSM on a AIX box. The library turned out to be very unreliable to the point
where every component was replaced but still it did not function correctly.
In the end IBM held their hands up and admitted that there where issues
The only diffrence between mksysb and the backup command is this.
mksysb Tape has 4 Sectors
BOS Boot Image
Blocksize=512
Witch holds: Kernel, Device Drivers
mkinsttape image
Bloksize=512
Witch holds: ./image.data, /tapeblksz, /bosinst.data, commands
dummy.toc
Blockzise=512
Witch holds: Dumm
Finn,
I don't know about manual starts of the client but for scheduled events
the parameters MAXCMDRETRIES and RETRYPERIOD work together to
control the number of times a client scheduler attempts to contact the server
if the server is not responding - for whatever reason - at the allotted
schedul
Hi
I occurred sometimes when I cancel a process like reclamation or audit of a
damaged volume, it took a very long time to kill the process.
Any ideas how can I make it faster.
T.I.A Regards
Robert Ouzen
\\\/// <\\\///>
/ _ _ \
(
> SQL server 6.5
>
> What parameters must I put into the Tivoli SQL 1.1 bat file so that the
> logs get truncated
Hugo,
For TDP for SQL version 1...
Take a look at Chapter 1 of the User's Guide.
Under section titled "Additional SQL Application Client
Backup Strategy Considerations" it discusses
> Sounds like you're trying to restore a database to the same machine. You
> can't do that with SQL 7. You have to restore the database to a
different
> machine or restore it over the existing database.
You should be able to do this for full backups using the
/RELOCATE and /TO options. Take a
> FYI... TDP for SQL is out of service
> as of 1/26/2002. I realize you are still
> running on SQL 6.5 which is not supported
> by TDP for SQL 2.2... but I wanted to
> make you aware of it.
Of course I meant to say TDP for SQL V1
went out of service 1/26/2002.
Del
Ben, use the *st or *stc device. There is a section on how to configure
3583/Solaris/TSM in the Using IBM LTO Ultrium with Open Systems redbook
SG24-6502, see page 158. You will find this redbook very helpful.
_
William Mansfield
Senior Consultant
Solution Technolo
> MGMT for Domino client has configurated for storing 30
> version.
> My question is :
> The inactivelog command removes the transation logs
> for inactive versions of the domino database backups
> when these logs don't contain info about active domino
> database.
> Then I can only restore the ina
Good Morning,
I am looking for some best practices from the list on how to handle
backups that have either failed or were missed during the night. We currently
backup 1000 nodes to four TSM servers. Most mornings we have about 20-30
servers that have had a problem completing their backu
Having a mksysb backup in TSM is pretty useless unless you are in a NIM
environment. The mksysb made directly to tape has 4 sections, the one made
to a file only has one section. In theory you can construct a bootable
tape from that section, but I've never been able to get it to work right.
_
you have to wait until the Space Reclimation has finished the curent file it was
transfering. If the file is Huge you just have to wait the time for it to finish.
You can halt the server, but then you could end up with corupt database, damaged files
and so on. basicly NOT RECOMENDED.
Kvedja/
Hi All,
I've come across a strange problem:
An RS/6000 F80 with an 3584 (8 * LVD drive) has an average througput op 20 MB/s when
using all 8 drives(Split across 3 UltraSCSI-controllers 3-3-2). Normally you would
assume a max. throughput of 8 * 15 MB/s = 120 MB/s when making a backup.
Anyone f
If you want something automated, then you may want to write a script that
would
issue a query event * * t=c to search for 'failed', 'severed', 'missed', &
'uncertain' scheduled client events.
After it identifies the problem clients, it immediately starts off
incremental backups from the command l
Hi all,
I've migrated one client NT 4.0 SP6 from TSM 4.2.0.0
to TSM 4.2.1.20. All was OK untill I tried to restart
TSM services, one of them (scheduler) doen't start and
reply in dsmsched.log file :
07.02.2002 14:27:13 ANS0299E Scheduler cannot be
started manually because the value of MANAGEDSER
If you are looking to move just a selected file system then I would assume
you can substitute the collocation form node to filesystem.
I'm in the process of moving from 1 tapepool to multiple tape pools.
If you are using collocation it's just a matter of using the move data
command.
If you are not
Hi,
Could TSM Client that is installing with TSM Server be used in a Microsoft
Cluster Server or
Is there a specific TSM Client for a Microsoft Cluster Server?
Thanks in advance,
Nazir
Yes you can use the standard TSM Client. You need to do a few modifacations
though, you can find the instructions in the TSM Client manual.
Kvedja/Regards
Petur Eythorsson
Taeknimadur/Technician
IBM Certified Specialist - AIX
Tivoli Storage Manager Certified Professional
Microsoft Certified Syste
Hi
I want to restore x nodes data to y node belonging to same TSM server.
THANKS FOR UR HELP in advance.
Thanks.
Balanand
Hi *SM-ers/3584-ers!
I'm checking the microcodes on my 3584 LTO library. The IBM 3584
UltraScalable Tape Library Specialist points me to
http://ssddom02.storage.ibm.com/tape/lto/ultrascalable_library/firmware.html
.
My drives are on level 18N2, so they are up-to-date, but this page offers
library
You need to grant authority from the x nodes to the Y node, so it can
restore other client´s data.
You can do this both on the x nodes and on the TSM Server.
REMEBER. the filesystems on the clients need to be compatable. Like you can
restore data from Win9x to WinNT or WIN2k.
But you CAN NOT res
A while back i posted an archiving (on last accessed date) Perl script for NetWare,
Perl is native to NetWare and runs from the console (use cron.nlm to schedule), works
on 4.11 and 5.1. You should be able to script whatever you need with Perl, Novell has
done a excellent port from Unix. Be su
Hello,
I want to install and configure a IBM 3583 LTO tape library for use with
TSM, but how to do ?
1) There is a W2K Backupserver with TSM 4.2
2) A SCSI connected 3583 tape library with two LTO drives.
**
my questions are:
Which device driver should I install ? The package IBMUltrium
Use -virtualnodename=x in your restore command
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
| Arnaud Brion, Panalpina Management Ltd., IT Group |
| Viaduktstrasse 42, P.O. Box, 4002 Basel - Switzerland |
| Phone: +41 61 226 19 78 / Fax: +41 61 226 17 01 |
=-=-=-=-=-=-=-=-=
I have a new 3584 (6 weeks) and it has drive 18N2 and library 2360 also,
as delivered. No updates done here. I suspect website is behind.
David Longo
>>> [EMAIL PROTECTED] 02/07/02 09:45AM >>>
Hi *SM-ers/3584-ers!
I'm checking the microcodes on my 3584 LTO library. The IBM 3584
UltraScalable T
If you used the Wizard to setup these services it doesn't quite do it
correctly (APAR= IC32620
ANS0299E SCHEDULE WIZARD SETS SCHEDULE SERVICE TO AUTOMATIC START-UP IN CAD
MANAGED CONFIGURATION
APAR= IC32752 SER=WIZARD AUTOMATIC STARTUP CAD MANAGED SCHEDULER SHOULD
START CAD AFTER THE WIZARD CONFI
I have had simmilar problems on IBM 3583.
They all got solved by Installing the firmware, Restarting the stuff and
check the firmware again.
i sometimes had to do this up to 3 times befor all the LTO drives firmware
kicked in.
Kvedja/Regards
Petur Eythorsson
Taeknimadur/Technician
IBM Certifie
It seems to me that you have the option MANAGEDServices set to
'managedservices schedule'
or 'managedservices schedule webclient' in your dsm.opt file. If you specify
the schedmode=prompt option, the server prompts the CAD when it is time to
run the schedule. The scheduler will connect and disconn
I did say
grant authority x classes=node node=y
then
verified by
query admin x format=detail.
All are AIX nodes.
-Original Message-
From: Pétur Eyþórsson [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 8:44 AM
To: [EMAIL PROTECTED]
Subject: Re: How to restore x server s data
Have you tried looking at ftp://service/software.ibm.com ??
Richard.
-Original Message-
From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 3:57 PM
To: [EMAIL PROTECTED]
Subject: Re: 3494 through SAN Data Gateway
Hi *SM-ers!
My 3590 drives are work
Hi *SM-ers!
My 3590 drives are working through the SAN Data Gateway now. The problem
wasn't related to the missing device package message, but it was a wrong
SCSI cable (one without a terminator).
However, I still receive the following message when running cfgmgr:
cfgmgr: 0514-621 WARNING: The fo
The way I have used in the passed is
edit the nodename field in dsm.opt to point to x
Start the command line session and supply x client password.
Hey presto , you should be able to restore the data.
Regards Jason
"PINNI, BALANAND (SBCSI)" <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 07/02/2002
sorry - its not the LANG - Variable as I thought,
but you may get the files being backed up if you set instead
theLC_CTYPEVariable for example to en_US.
This works for Umlaut-Files on a Suse 7.1 / TSMClient 4.2.0.0+TSMClient 4.2.1.0
The LC_CTYPE environmental - Variable on the Suise
should I DEFINE VIRTUAL NODE NAME IN DSM.OPT FILE.
bALANAND
-Original Message-
From: PAC Brion Arnaud [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 8:53 AM
To: [EMAIL PROTECTED]
Subject: Re: How to restore x server s data to Y server .
Use -virtualnodename=x in your resto
Hi Mr Loon,
I could be false, be I believe I remember we had the same problem, until
we updated values in the SDG, as said before :
1) disableCC
2) setHost 0, "aix" or setHost 0 AIX
3) setHost 1, "aix" or setHost 1 AIX
4) and reboot the device.
5) remove the tape drives (rmdev -dl rm
Yes, definitively (vitualnodename x), or, if using command line just
give it as a parameter : dsmc restore blah blah -virtualnodename=x
Note that you'll be asked for the passwort of node x !
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
| Arnaud Brion, Panalpina Management Ltd., IT Gr
Hi Arnaud!
I have issued the setHost 0,"aix" before installing the SAN Data Gateway. I
checked the Fibre Channel settings through the IBM StorWatch SAN Data
Gateway Specialist: The host type is set to AIX, so that shouldn't be the
cause...
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines
=> [ lots of folks said ]
> "Tina" bad. Bad Tina.
It was clearly a form letter, but mail sent to ADSM-L subscribers probing for
interest in TSM contracting is hardly indiscriminate spam. If she did even a
little evaluation of who to send to, who not... well, those who yelled at her
are then de
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 10:45 AM
To: [EMAIL PROTECTED]
Subject: Re: Who else got 'Job Spam'?
=> [ lots of folks said ]
So I leave you with two questions:
1) Why are backup admins testy this way? Is this an
Hi again,
OK, you checked SetHost, but did you issue the DisableCC command and
reboot you SDG ? I found an old install doc I made during our install,
and am positively sure it's the reason of your problem !
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
| Arnaud Brion, Panalpina Manag
Del,
Is there some place on Tivoli's website that documents this about TDP for
SQL V1 going out of service??
Thanks,
Matt
-Original Message-
From: Del Hoobler [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 7:14 AM
To: [EMAIL PROTECTED]
Subject: Re: Need help on truncated
I want to say that if you go through the San Data Gateway pages in IBM land
there is a link to that off of the documentation pages. I will look closer
in a bit but that might help.
Becky
-Original Message-
From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 0
Adams, Matt (US - Hermitage) would like to recall the message, "Need help on
truncated Sql database".
- This message (including any attachments) contains confidential information
intended for a specific individual and purpose, and is protected by law. -
If you are not the intended recipient, you
Wow! I wouldn't know where to start! It's huge
I checked the /storage and /rs6000 subdirectories, but it's not there...
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: Denzel, Richard van [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 16:
Where is the data coming from? During the testing I did on LTO vs. SDLT I
observed similar behavior. I concluded that the RAID5 set containing my
disk storage pools was the bottleneck.
The paper is available at
http://www.storsol.com/pub/LTOvsSDLT.pdf?timeout=200
Kelly J. Lipp
Storage Solutio
First off I am brand new to this forum (1 week). I have found there are some
very helpful individuals out there and I am sure your help is greatly
appreciated by the ones asking questions. I did not receive the "spam" that
has been in question. I do not feel that an occasional inquiry to the forum
If you are using a SAN DATa Gateway to bridge the gap between your FC and
SCSI drives then that might be the bottle neck. So it is worth checking it
out.
Regards,
Michael Swinhoe
Storage Management Group
Kelly Lipp
cc:
ANS0299E is indeed documented.
You can use the online help to find the information about the message:
dsmc help
Keep pressing 'd' until you get to the messages, then select the menu item
that corresponds to the range of messages that include ANS0299E.
Regards,
Andy
Andy Raibeck
IBM Softwa
Demetrius,
I did what you said and it works fine ...
Many thanks
Andy
--- "Malbrough, Demetrius" <[EMAIL PROTECTED]>
wrote: > It seems to me that you have the option
> MANAGEDServices set to
> 'managedservices schedule'
> or 'managedservices schedule webclient' in your
> dsm.opt file. If you s
Did you try your fibre channel adapter software?
Still looking for other info but I think we installed off of the cd's we
received with our adapters.
Becky
-Original Message-
From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 9:51 AM
To: [EMAIL PROTE
I am looking for what client option parameters for W2K should be
included
Option/Sequence numbers on the tsm server side to over-ride the
client options
EG. compressalways 0
compression 0
dirmc 0
I'm pretty sure they vary from win3.1 ,win412 an
Hi
Has anyone successfully done a split of the library ?
I have a LTO3584 , we have 6 scsi drives for our production
environement and we have
2 fibre drives for another project. When attempted to configure so
that each environments
are connecting to the ap
Are you talking about Library partitioning?
Kvedja/Regards
Petur Eythorsson
Taeknimadur/Technician
IBM Certified Specialist - AIX
Tivoli Storage Manager Certified Professional
Microsoft Certified System Engineer
[EMAIL PROTECTED]
Nyherji Hf Simi TEL: +354-569-7700
Borgartun 37
If desired, you can use Schedmode Prompted with the Schedule as a Managed
Service - see my previous post.
-Original Message-
From: Aloes consultant [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 10:37 AM
To: [EMAIL PROTECTED]
Subject: Re: ANS0299E when starting NT scheduler
I want them production clients to scsc drives
and my san project clients to use fibre drives
and allocate production clients no.of slots in the library and the same for
the san clients
> -Original Message-
> From: Pétur Eyþórsson [SMTP:[EMAIL PROTECTED]]
> Sent: Thursday, February 07,
We had a tech in recently to upgrade our code to 2360, and he said it
wasn't published on the website yet.
Bud Brown
Information Services
Systems Administrator
303-436-5986
-Original Message-
From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 7:46
Hello,
one of our customers wants to implement a SAN (2x ESS F20, 2 STK 9310, 2
TSM Serves p660, TSNM, FC/9000 directors, etc.) but is not willing to
install the Internet Explorer 5 on his Windows servers (for security
reasons).
He wants to know why the IE5 is necessary for the Storage Agent (SA
We have 2 Tivoli Servers connected to our 3584 library w/ 8 SCSI drives.
Each server has its own connection to seperated tape drive loops. We
had to do a Advanced configuration to specify drives and I/O slots. Our
setup consists of 2 completely seperate TSM servers with their own set
of domains.
One TSM server
It looks like I'm able to create sep.device classes and create own
primary/sec. tapepools for fibre drives
This resulted in core dumps and server crash - tape contention issues and
all
Unless, I physical(logical) configure them to recognize as 2 physical medium
changers - it seems
Hi,
you can use the ordinary TSM Client for M$ Cluster Server, but you have to
configure a TSM Node for every used Disk Group inside the
cluster.
[EMAIL PROTECTED]
Sent by: [EMAIL PROTECTED]
07.02.2002 15:44
Please respond to ADSM-L
To: [EMAIL PROTECTED]
bcc:
Su
$SMers HELP ME PLEASE!
Server Win2K TSM 4.1.4.5 - Client Netware 5.1 TSM 4.1.3 -
I administer the TSM server remotely and am NOT the sys admin for the box.
Same holds true for the client... The remote site
previously used ArcServe and that server suddenly went belly up. Since the
plan for the re
Dirk, you can stop the Storage Agent Client by routing the HALT command to
it since it is a defined server.
Regards,
James W. Brents Jr.
Valero Energy Corporation
-Original Message-
From: Dirk Billerbeck [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 11:01 AM
To: [EMAIL PR
George,
Have the Netware admin check to see if he has volume compression turned on -
if so do not use TSM compression.
That may help some if that is the case.
Regards,
Mike
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
George Lesho
Sent: Thursday,
1. We're no more prickly than other folks on single-focus lists. I've
been on other lists where an advertising pitch would generate a ton of
flaming retrospam (there's a mental image!) But there is no explicit set
of house rules for this list as there is on others. My problem is I don't
have t
*SMers,
We're trying to restore a backupset from 9840 media. Our tape drive is
attached to an AIX client and we are seeing only 1-2 MB/sec data transfer
rates.
Is there a reason why we don't see tape and/or disk speeds on this
restore? The disk should run at 14-15 MB/sec and the SCSI 9840 at 1
---
TSM Policy Settings
---
POLICY DOMAIN - This is a container for policy and scheduling info
*BACKRETention* is a fallback value for any files which
have been backed up under the specified policy domain,
but for
Thanks to all that helped with my Expire inventory locking up. We now run expiration
for duration =300. should finish at 5:00 p.m. what happens, it will be expiring data
fine and then kinda hose up again. It stops deleting files for a hour maybe 2. Then
will continue again, but at a turtles pac
I whipped this up because I run into so many people who want to figure
it out on their own, but really are just lost in the slew of new
concepts. Here is a basic list of things to do when setting up your tsm
server the first time. Suggestions and corrections are welcome.
-Josh
---
>It was clearly a form letter, but mail sent to ADSM-L subscribers probing for
>interest in TSM contracting is hardly indiscriminate spam. If she did even a
>little evaluation of who to send to, who not... well, those who yelled at her
>are then dead-wrong, in addition to being rude.
The messag
We are in the process of writing an Linux archive client through
the TSM API (4.2), storing objects in an TSM 4.1 server running
on AIX. We would like to avoid writing a retrieve client, as
we're satisfied with the functionality of the TSM BA client. I
know there have been interoperability issues
Neil,
As long as we're discussing the 3583, I'll share my experiences.
TSM 4.1.5 on AIX 4.3.3; 3583-L72 w/ 4 drives; HVDS.
Collocated data for 14 nodes.
After about a month of operation, the picker and picker controller failed.
Left two tapes stuck in drives. IBM HW Support replaced the picker
Now, that is the most useful whippet of info. I've seen here!
-Original Message-
From: Josh Davis [mailto:[EMAIL PROTECTED]]
Sent: Friday, February 08, 2002 7:41 AM
To: [EMAIL PROTECTED]
Subject: HOWTO: TSM Server Quickinst
I whipped this up because I run into so many people who want t
Check the README and other docs that came with the 4.2 client software. In
4.2 you have the option to have the CAD service manage the TSM Scheduler
service which is nice because the TSM Scheduler doesn't always have to
remain running. Instead, the CAD communicates with the TSM server and when
it
Hi
We are using TSM server Version 4, Release 1, Level 3.0 on AIX 4.3.3
I added another 35 GB disk to the server, and want to increase database and
log size for TSM by defining new dbv and logv volumes. Currently all the
.dsm files for database and log are 2 GB each. I wanted to know if I should
We have the following configuration (all on same Sun Ultra server
hardware/OS):
Solaris 7 (64-bit kernel)
Oracle 8.1.7/RMAN (32-bit)
TSM Server 4.1.2
(new) TSM 4.1.2.12 BA Client (64-bit)
(new) TSM 4.1.2.12 API (64-bit)
(new) TDP Oracle 2.1.10 (32-bit)
We're trying
I've been looking for a new optical jukebox for my system at home since my
old HP unit died in the midst of an upgrade.
I was looking at an Sony OSL-2001, a nice, compact, fairly inexpensive unit
(used, of course), but it appears to be the ONLY Sony library that's
unsupported. It uses the Sony 2
Technically if your tape drives are direct connected to a NetApp filer,
then they would not be IN a SAN.
--
Joshua S. Bassi
Sr. Solutions Architect @ rs-unix.com
IBM Certified - AIX/HACMP, SAN, Shark
Tivoli Certified Consultant- ADSM/TSM
Cell (415) 215-0326
[EMAIL PROTECTED]
-Original Messa
The reason they started on the Windows platform is because today
everything is available on Windows TSM servers 1st with UNIX being
developed on 2nd (sad as it may be).
--
Joshua S. Bassi
Sr. Solutions Architect @ rs-unix.com
IBM Certified - AIX/HACMP, SAN, Shark
Tivoli Certified Consultant- ADS
Erik,
ftp://service.software.ibm.com/aix/fixes/v4/devices you will find all the
devices.fcp.disk and devices.fcp.tape LPP's.
Richard.
-Original Message-
From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 4:51 PM
To: [EMAIL PROTECTED]
Subject: Re:
Nope,
The 3584 is direct SCSI attached.
Richard.
-Original Message-
From: Mike Swinhoe [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 5:17 PM
To: [EMAIL PROTECTED]
Subject: Re: LTO strange behaviour
If you are using a SAN DATa Gateway to bridge the gap between your FC an
88 matches
Mail list logo
