Bob, Center the stick vertically in its neutral position. Securely fix it in place where it will not move. Next, securely fix the elevator in the neutral position. Then tighten both cables going to the elevator. The result will be equal up and down movement of the elevator.
Mark Jones (N886MJ) ----- Original Message ----- From: "Bob Sauer" <resa...@cox.net> > This is the way it is done and I am still having the problem. > > > the elevator bell crank hole spread from the center line out to the2 outer > > holes must be equal distance & match the hole spread in the stick with the > same > > spread & distance,steve jones > > _______________________________________________ >
