Are they the same on the elevator horn? N64KR
Daniel R. Heath - Columbia, SC da...@kr-builder.org See you in Mt. Vernon - 2004 - KR Gathering See our KR at http://KR-Builder.org - Click on the pic See our EAA Chapter 242 at http://EAA242.org -------Original Message------- From: KRnet List-Post: krnet@list.krnet.org Date: Thursday, November 13, 2003 8:40:24 PM To: KRnet Subject: Re: KR>Elevator/Control Stick Adjustment Hi Mark, They were pre-drilled about equal distance from the stick mounting hole, approx. 3" up and down. ----- Original Message ----- From: "Mark Jones" <flyk...@wi.rr.com> To: "KRnet" <kr...@mylist.net> Sent: Thursday, November 13, 2003 6:05 PM Subject: Re: KR>Elevator/Control Stick Adjustment > Bob, > Where are your cable attach points on the control stick? > > Mark Jones (N886MJ) > Wales, WI USA > E-mail me at flyk...@wi.rr.com > Visit my KR-2S CorvAIRCRAFT web site at > http://mywebpage.netscape.com/n886mj/homepage.html > > > ----- Original Message ----- > From: "Bob Sauer" <resa...@cox.net> > > > I am having a difficult time adjusting the movement of the control stick and > the elevator. Getting the down 20 degree is possible, but getting the up 30 > degree with less than deflecting the control stick to the point where the > top of it is at the rear spar is not possible. Does anyone have > suggestions. I used the RR center stick and built the elevator control horn > per plans. I am using cables. > > > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html _______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html .
