Want to sell me the 4 foot cables? Les Criscillo Tampa, FL
lcris...@tampabay.rr.com leslifeandfrie...@groups.msn.com ----- Original Message ----- From: David Mullins To: KRnet Sent: Saturday, November 15, 2003 10:12 Subject: Re: KR>Aileron Control Les, I purchased two 4' B&M shifter cables when I started to redo my aileron controls using a torque tube to get behind the aft spar. I went with the 8' cables because now they go from the left stick through a 180ยบ turn under the seat, under the aft spar, and out the left stub wing to a bellcrank. No torque tube needed now. When I get the brackets mounted to the dual stick assembly I will get a picture to you. Dave Mullins Nashua, New Hampshire http://n323xl.iwarp.com Les Criscillo wrote: >Thanks David, I've looked over the site. The shortest cable they seem to have is an 8 foot one. I'll need something shorter than that I think ...but at least it's a place to start! Thanks again! > >Les Criscillo >Tampa, FL > >lcris...@tampabay.rr.com >leslifeandfrie...@groups.msn.com > ----- Original Message ----- > From: David Mullins > To: KRnet > Sent: Saturday, November 15, 2003 00:59 > Subject: Re: KR>Aileron Control > > > Les, > > Here is the link to the site were I puchased my push-pull cables. > > http://www.outdoorsuperstore.com/store/products/category.asp?categoryID=61805 > > The 33C cables are 10-32 threads and the 43C cables are 1/4-28 > > Dave Mullins > Nashua, New Hampshire > > Les Criscillo wrote: > > >Let me know what you find out..I've been looking into several options. I'm thinking about having a set of transmission cables made custom length by B+M with fittings on both ends. I saw a similar set up on an all glass sea plane at the Sun and Fun a couple of years ago, and the controls were smooth and free. I'll let you know if I get any additional info. > > > >Les Criscillo > >Tampa, FL > > > >lcris...@tampabay.rr.com > >leslifeandfrie...@groups.msn.com > > ----- Original Message ----- > > From: Phil Matheson > > To: KRnet > > Sent: Friday, November 14, 2003 05:56 > > Subject: Re: KR>Aileron Control > > > > > > Has anyone used Aileron Push Pull Cables, ( AS they use in the > > Jabiru )instead of Normal Cables or Push rods? > > > >_______________________________________________ > >see KRnet list details at http://www.krnet.org/instructions.html > > > > > > > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html_______________________________________________ >see KRnet list details at http://www.krnet.org/instructions.html > > > _______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html
