The distance of the cable attach points on the bellcrank at the elevator should be the same distance as those on the control stick. Do you have turnbuckles as Dan mentioned to tighten and adjust the cables?
Mark Jones (N886MJ) ----- Original Message ----- From: "Bob Sauer" <resa...@cox.net> > Hi Mark, > > They were pre-drilled about equal distance from the stick mounting hole, > approx. 3" up and down. > > > > > Bob, > > Where are your cable attach points on the control stick? > > > > ----- Original Message ----- > > From: "Bob Sauer" <resa...@cox.net> > > > > > > I am having a difficult time adjusting the movement of the control stick > and > > the elevator. Getting the down 20 degree is possible, but getting the up > 30 > > degree with less than deflecting the control stick to the point where the > > top of it is at the rear spar is not possible. Does anyone have > > suggestions. I used the RR center stick and built the elevator control > horn > > per plans. I am using cables.
