On Thu, 19 Dec 2019 at 06:10, Thomas D. Dean <[email protected]> wrote:
> order to do that, the python-vte problem has to be fixed. > > Where should this fix be applied? I think that it is in the Debian control files. https://github.com/LinuxCNC/linuxcnc/blob/master/debian/control.bottom.in I have been away from my LinuxCNC machines for a week or so, but before that I was working through the build-time and run-time dependencies one-by-one to determine which were real. I think if you remove python-vte from that file then the deb will install without it. If you feel like doing the tests, it would be useful to see which GUIs then work, and which not. At release time we can probably backport python-vte on the linuxCNC repo, the way we do with some other dependencies, like glade-gtk2 here: http://www.linuxcnc.org/dists/wheezy/base/binary-amd64/ -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
