Thanks Niall :)

On Sun, Mar 30, 2008 at 1:28 PM, Niall Pemberton
<[EMAIL PROTECTED]> wrote:
> On Wed, Mar 26, 2008 at 4:33 PM, [EMAIL PROTECTED]
>
> <[EMAIL PROTECTED]> wrote:
>  > Hi Mohammed,
>  >
>
> >  To clarify, the process Niall recommended is as follows:
>  >
>  >  (1)
>  >  You send an email in a separate thread, requesting sandbox commit rights
>  >  for yourself and the other initial committer.
>  >
>  >  Provide your apache ids of course.
>  >
>  >  It might be nice to provide links to show some evidence of your
>  >  committer access, eg links to the "developers" lists for the projects
>  >  you currently are committers for.
>  >
>  >  Also provide a very brief summary of what you intend to do in the
>  >  sandbox, for people who have not read this thread.
>  >
>  >  (2)
>  >  After a couple of days, assuming there are no objections to this
>  >  proposal, Niall (or someone else) will copy validator trunk into the
>  >  sandbox.
>
>  Done:
>
>  http://svn.apache.org/viewvc/commons/sandbox/validator2/
>
>
>  >  (3)
>  >  Hopefully your sandbox commit rights will also be done by then and you
>  >  can get started.
>  >
>  >  Of course, you can also use the next few days to start a design
>  >  discussion on this list, or create some wiki pages for architectural
>  >  discussion, links to the relevant projects, etc.
>  >
>  >  I'm happy to help with getting this project started if needed (I'm also
>  >  a MyFaces committer).
>
>  Good summary, thanks Simon!
>
>  Niall
>
>
>
>  >  Regards,
>  >  Simon
>  >
>  >  Mohammad Nour El-Din schrieb:
>  >  > And u did it :( ???
>  >  >
>  >  > On Wed, Mar 26, 2008 at 6:07 PM, Niall Pemberton
>  >  > <[EMAIL PROTECTED]> wrote:
>  >  >
>  >  >> On Wed, Mar 26, 2008 at 3:58 PM, Mohammad Nour El-Din
>  >  >>
>  >  >> <[EMAIL PROTECTED]> wrote:
>  >  >>
>  >  >>
>  >  >>> Thanks Niall a lot. One last question for the sandbox project - if
>  >  >>>
>  >  >>  >  approved - can I help you in creating whatever required for that
>  >  >>  >  project, I just want to learn how these things are made :), I mean
>  >  >>  >  steap related to creating new projects and so .
>  >  >>
>  >  >>  Acutally, I think if you get Karma then you can do it yourself - I was
>  >  >>  just going to create a validator2 directory here:
>  >  >>  http://svn.apache.org/viewvc/commons/sandbox/
>  >  >>
>  >  >>  and then copy the validator trunk.
>  >  >>
>  >  >>
>  >  >>
>  >  >>  Niall
>  >  >>
>  >  >>  >  On Wed, Mar 26, 2008 at 5:31 PM, Niall Pemberton
>  >  >>  >
>  >  >>  >
>  >  >>  > <[EMAIL PROTECTED]> wrote:
>  >  >>  >  > On Wed, Mar 26, 2008 at 3:20 PM, Mohammad Nour El-Din
>  >  >>  >  >
>  >  >>  >  > <[EMAIL PROTECTED]> wrote:
>  >  >>  >  >
>  >  >>  >  > > Hi simon...
>  >  >>  >  >  >
>  >  >>  >  >  >   Thanks a lot :), but I like the idea of Naill, that is make 
> a
>  >  >>  >  >  >  sandbox project for Validator2, so I can work away from the 
> release
>  >  >>  >  >  >  process of the current implementation of validator - 
> Validator1, and
>  >  >>  >  >  >  when I have a working thing, we can get it out of sandbox to 
> commons
>  >  >>  >  >  >  proper as part of the main Validator project, so people can 
> have 2
>  >  >>  >  >  >  falvours of Validator either 1/2. What do you think Naill ??
>  >  >>  >  >
>  >  >>  >  >  Yes I'm happy with that. I'll leave it a couple of days, to 
> give other
>  >  >>  >  >  people a chance to give opnions - but if there are no 
> objections/other
>  >  >>  >  >  proposals then I'll go ahead and set that up in the Sandbox. For
>  >  >>  >  >  sandbox access I think its just a case of pinging the list 
> (probably
>  >  >>  >  >  best in another thread, as it might get missed in this one) to 
> ask for
>  >  >>  >  >  Sandbox karma for yourself and your MyFaces colleague.
>  >  >>  >  >
>  >  >>  >  >
>  >  >>  >  >
>  >  >>  >  >  Niall
>  >  >>  >  >
>  >  >>  >  >  >
>  >  >>  >  >  >  On Wed, Mar 26, 2008 at 5:11 PM, [EMAIL PROTECTED]
>  >  >>  >  >  >  <[EMAIL PROTECTED]> wrote:
>  >  >>  >  >  >  > Hi Mohammed,
>  >  >>  >  >  >  >
>  >  >>  >  >  >  >  One of the purposes of the commons project is to pool the 
> work of other
>  >  >>  >  >  >  >  commons projects, ie extract bits out of other projects 
> that can be more
>  >  >>  >  >  >  >  widely applied. Therefore, the commons project is pretty 
> open to
>  >  >>  >  >  >  >  existing committers on other Apache projects getting 
> commit access to
>  >  >>  >  >  >  >  commons.
>  >  >>  >  >  >  >
>  >  >>  >  >  >  >  As long as the PMC/existing validator developers are 
> happy with the
>  >  >>  >  >  >  >  general idea, I think it likely that you (and any other 
> interested
>  >  >>  >  >  >  >  apache committers) would just be granted commit access to 
> apply changes
>  >  >>  >  >  >  >  yourself.
>  >  >>  >  >  >  >
>  >  >>  >  >  >  >  Regards,
>  >  >>  >  >  >  >  Simon
>  >  >>  >  >  >  >
>  >  >>  >  >  >  >  Mohammad Nour El-Din schrieb:
>  >  >>  >  >  >  >
>  >  >>  >  >  >  >
>  >  >>  >  >  >  > > Sorry for the last stupid question I could have know it 
> from site, but
>  >  >>  >  >  >  >  > one more - I hope not stupid - question, you will apply 
> the Validator2
>  >  >>  >  >  >  >  > code in trunk and make old validator in a separate 
> branch ???
>  >  >>  >  >  >  >  >
>  >  >>  >  >  >  >  > On Wed, Mar 26, 2008 at 4:58 PM, Niall Pemberton
>  >  >>  >  >  >  >  > <[EMAIL PROTECTED]> wrote:
>  >  >>  >  >  >  >  >
>  >  >>  >  >  >  >  >> On Wed, Mar 26, 2008 at 2:57 PM, Mohammad Nour El-Din
>  >  >>  >  >  >  >  >>
>  >  >>  >  >  >  >  >> <[EMAIL PROTECTED]> wrote:
>  >  >>  >  >  >  >  >>
>  >  >>  >  >  >  >  >>
>  >  >>  >  >  >  >  >>> Just to make sure, this is where trunk code exist
>  >  >>  >  >  >  >  >>>
>  >  >>  >  >  >  >  >>  >
>  >  >>  >  >  >  >  >>  >  
> http://svn.apache.org/repos/asf/commons/proper/validator/trunk/
>  >  >>  >  >  >  >  >>  >
>  >  >>  >  >  >  >  >>
>  >  >>  >  >  >  >  >>  Yes
>  >  >>  >  >  >  >  >>
>  >  >>  >  >  >  >  >>  Niall
>  >  >>  >  >  >  >  >>
>  >  >>  >  >  >  >  >>
>  >  >>  >  >  >  >  >>
>  >  >>  >  >  >  >  >>  >
>  >  >>  >  >  >  >  >>  >  On Wed, Mar 26, 2008 at 4:54 PM, Mohammad Nour 
> El-Din
>  >  >>  >  >  >  >  >>  >
>  >  >>  >  >  >  >  >>  > <[EMAIL PROTECTED]> wrote:
>  >  >>  >  >  >  >  >>  >
>  >  >>  >  >  >  >  >>  >
>  >  >>  >  >  >  >  >>  > > I skimmed over the JSR - not a detailed look 
> actually - and through
>  >  >>  >  >  >  >  >>  >  >  using annotations you declare the validator 
> class, so we can adapt the
>  >  >>  >  >  >  >  >>  >  >  current validators, or at least make minor 
> changes to make them
>  >  >>  >  >  >  >  >>  >  >  suitable to be used through JSR#303/Validator2 
> impl. I will download
>  >  >>  >  >  >  >  >>  >  >  the code today and take a more detailed look at 
> JSR PDF and if I found
>  >  >>  >  >  >  >  >>  >  >  more info I will send them back by the end of 
> this week.
>  >  >>  >  >  >  >  >>  >  >
>  >  >>  >  >  >  >  >>  >  >
>  >  >>  >  >  >  >  >>  >  >
>  >  >>  >  >  >  >  >>  >  >  On Wed, Mar 26, 2008 at 4:49 PM, Niall Pemberton
>  >  >>  >  >  >  >  >>  >  >  <[EMAIL PROTECTED]> wrote:
>  >  >>  >  >  >  >  >>  >  >  >
>  >  >>  >  >  >  >  >>  >  >  > On Wed, Mar 26, 2008 at 2:06 PM, Mohammad 
> Nour El-Din <[EMAIL PROTECTED]> wrote:
>  >  >>  >  >  >  >  >>  >  >  >  > Hi All...
>  >  >>  >  >  >  >  >>  >  >  >  >
>  >  >>  >  >  >  >  >>  >  >  >  >   Recently an EDR JSR#303 has been 
> published on JCP -
>  >  >>  >  >  >  >  >>  >  >  >  >  http://jcp.org/en/jsr/detail?id=303 . 
> They intend to make a unified
>  >  >>  >  >  >  >  >>  >  >  >  >  Bean Validation APIs/Framework based on 
> using annotations and XML
>  >  >>  >  >  >  >  >>  >  >  >  >  configuration files, and they define the 
> way how to apply and use
>  >  >>  >  >  >  >  >>  >  >  >  >  validation, and it will be part of the 
> Java Beans model.
>  >  >>  >  >  >  >  >>  >  >  >  >
>  >  >>  >  >  >  >  >>  >  >  >  >  I am a committer in Apache OpenEJB, and 
> we need such functionality for
>  >  >>  >  >  >  >  >>  >  >  >  >  bean validation through the process of 
> deploying an enterprise java
>  >  >>  >  >  >  >  >>  >  >  >  >  bean - we have a home made validation 
> framework now. And I have a
>  >  >>  >  >  >  >  >>  >  >  >  >  colleague of mine who is working in 
> Apache MyFaces Tomahawk-
>  >  >>  >  >  >  >  >>  >  >  >  >  
> http://myfaces.apache.org/tomahawk/index.html - and he is interested
>  >  >>  >  >  >  >  >>  >  >  >  >  in such functionality to apply validation 
> regarding JSF.
>  >  >>  >  >  >  >  >>  >  >  >  >
>  >  >>  >  >  >  >  >>  >  >  >  >  My colleague and I are very interested in 
> implementing this JSR in
>  >  >>  >  >  >  >  >>  >  >  >  >  Apache Commons Validator, but seems that 
> the project is not active for
>  >  >>  >  >  >  >  >>  >  >  >  >  a while, so I am asking how our changes 
> are going to be applied to
>  >  >>  >  >  >  >  >>  >  >  >  >  Commons Validator. I mean are we going to 
> submit changes in patches
>  >  >>  >  >  >  >  >>  >  >  >  >  and someone will review and commit - but 
> no one is active now to do
>  >  >>  >  >  >  >  >>  >  >  >  >  that. Or I can get a committer access to 
> apply changes and review
>  >  >>  >  >  >  >  >>  >  >  >  >  patches submitted by my colleague. Please 
> advice and help.
>  >  >>  >  >  >  >  >>  >  >  >
>  >  >>  >  >  >  >  >>  >  >  >  Do you have an idea how you want to do this 
> in Commons Validator?
>  >  >>  >  >  >  >  >>  >  >  >  Specifically I'm wondering whether this 
> would be a re-write or whether
>  >  >>  >  >  >  >  >>  >  >  >  you think the exisiting framework could be 
> adapated to JSR 303? My
>  >  >>  >  >  >  >  >>  >  >  >  thinking was that implementing JSR 303 would 
> involved and
>  >  >>  >  >  >  >  >>  >  >  >  brand-new-replacement for the existing 
> framework - Validator2.
>  >  >>  >  >  >  >  >>  >  >  >
>  >  >>  >  >  >  >  >>  >  >  >  Niall
>  >  >>  >  >  >  >  >>  >  >  >
>  >  >>  >  >  >  >  >>  >  >  >
>  >  >>  >  >  >  >  >>  >  >  >  >  P.S. I need your reply ASAP to stat 
> planning and coordination with my colleague.
>  >  >>  >  >  >  >  >>  >  >  >
>  >  >>  >  >  >  >  >
>  >  >>  >  >  >  >  >
>  >  >>  >  >  >  >  >
>  >  >>  >  >  >  >
>  >  >>  >  >  >  >
>  >  >>  >  >  >  >  
> ---------------------------------------------------------------------
>  >  >>  >  >  >  >  To unsubscribe, e-mail: [EMAIL PROTECTED]
>  >  >>  >  >  >  >  For additional commands, e-mail: [EMAIL PROTECTED]
>  >  >>  >  >  >  >
>  >  >>  >  >  >  >
>  >  >>  >  >  >
>  >  >>  >  >  >
>  >  >>  >  >  >
>  >  >>  >  >  >  --
>  >  >>  >  >  >  Thanks
>  >  >>  >  >  >  - Mohammad Nour
>  >  >>  >  >  >
>  >  >>  >  >  >
>  >  >>  >  >  >
>  >  >>  >  >  >  
> ---------------------------------------------------------------------
>  >  >>  >  >  >  To unsubscribe, e-mail: [EMAIL PROTECTED]
>  >  >>  >  >  >  For additional commands, e-mail: [EMAIL PROTECTED]
>  >  >>  >  >  >
>  >  >>  >  >  >
>  >  >>  >  >
>  >  >>  >  >  
> ---------------------------------------------------------------------
>  >  >>  >  >  To unsubscribe, e-mail: [EMAIL PROTECTED]
>  >  >>  >  >  For additional commands, e-mail: [EMAIL PROTECTED]
>  >  >>  >  >
>  >  >>  >  >
>  >  >>  >
>  >  >>  >
>  >  >>  >
>  >  >>  >  --
>  >  >>  >  Thanks
>  >  >>  >  - Mohammad Nour
>  >  >>  >
>  >  >>  >  
> ---------------------------------------------------------------------
>  >  >>  >  To unsubscribe, e-mail: [EMAIL PROTECTED]
>  >  >>  >  For additional commands, e-mail: [EMAIL PROTECTED]
>  >  >>  >
>  >  >>  >
>  >  >>
>  >  >>  ---------------------------------------------------------------------
>  >  >>  To unsubscribe, e-mail: [EMAIL PROTECTED]
>  >  >>  For additional commands, e-mail: [EMAIL PROTECTED]
>  >  >>
>  >  >>
>  >  >>
>  >  >
>  >  >
>  >  >
>  >  >
>  >
>  >
>  >  ---------------------------------------------------------------------
>  >  To unsubscribe, e-mail: [EMAIL PROTECTED]
>  >  For additional commands, e-mail: [EMAIL PROTECTED]
>  >
>  >
>
>  ---------------------------------------------------------------------
>  To unsubscribe, e-mail: [EMAIL PROTECTED]
>  For additional commands, e-mail: [EMAIL PROTECTED]
>
>



-- 
Thanks
- Mohammad Nour

---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to