Well done. Glad it worked out.
From: Daniel Cormier via CnC-List
Sent: Thursday, October 11, 2018 9:29 PM
To: cnc-list@cnc-list.com
Cc: Daniel Cormier
Subject: Re: Stus-List padwheel issues
I swapped it out for the plug tonight and it worked. I got about 4 or 5 cups of
water out but nothing severe. The wheel was full of baby muscles. I cleaned it
out, gave it a spin and got all my data! Working and AOK! :) thanks everyone
for the feedback and tips!
Dan
Breakaweigh
C&C44
Halifax, NS
Sent from my iPhone
On Oct 11, 2018, at 7:17 PM, robert via CnC-List <cnc-list@cnc-list.com> wrote:
Dan:
One thing with my 2 plugs, both the transducer and the blank, they fit down
into the thru hull in an exact position.....yours may be different....but on
mine, on both plugs, there are two points that have to be lined up to drop into
their respective slots on the thru hull....one obvious reason for this is to
ensure you install the padwheel in the correct position, facing forward and not
to a side angle....on both plugs, I need a few turns down before I can feel if
they are in their slots....I know when things are lined up because I can now
longer turn the plug.
But like I said, mine is an old 34 year Signet but it works fine when the
padwheel is clean of any debris.
Rob Abbott
AZURA
C&C 32 - #277
Halifax, N.S
On Thu, Oct 11, 2018 at 9:59 AM Dan via CnC-List <cnc-list@cnc-list.com>
wrote:
or bite the bullet and try pulling the sensor out completely and
replacing it with the plug which to me sounds like extremely risky business but
you guys seem to think it's a breeze...
WISH ME LUCK!
Dan
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
--------------------------------------------------------------------------------
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
