Can’t wait to see the video 😊

/John

> On Oct 11, 2018, at 9:29 PM, Daniel Cormier <dgcorm...@gmail.com> wrote:
> 
> I swapped it out for the plug tonight and it worked. I got about 4 or 5 cups 
> of water out but nothing severe. The wheel was full of baby muscles. I 
> cleaned it out, gave it a spin and got all my data! Working and AOK! :) 
> thanks everyone for the feedback and tips!
> 
> Dan
> Breakaweigh
> C&C44
> Halifax, NS
> 
> Sent from my iPhone
> 
>> On Oct 11, 2018, at 7:17 PM, robert via CnC-List <cnc-list@cnc-list.com> 
>> wrote:
>> 
>> Dan:
>> One thing with my 2 plugs, both the transducer and the blank, they fit down 
>> into the thru hull in an exact position.....yours may be different....but on 
>> mine, on both plugs, there are two points that have to be lined up to drop 
>> into their respective slots on the thru hull....one obvious reason for this 
>> is to ensure you install the padwheel in the correct position, facing 
>> forward and not to a side angle....on both plugs, I need a few turns down 
>> before I can feel if they are in their slots....I know when things are lined 
>> up because I can now longer turn the plug.  
>> 
>> But like I said, mine is an old 34 year Signet but it works fine when the 
>> padwheel is clean of any debris. 
>> 
>> Rob Abbott
>> AZURA
>> C&C 32 - #277
>> Halifax, N.S 
>> 
>> 
>> 
>>> 
>>>> On Thu, Oct 11, 2018 at 9:59 AM Dan via CnC-List <cnc-list@cnc-list.com> 
>>>> wrote:
>>>>  or bite the bullet and try pulling the sensor out completely and 
>>>> replacing it with the plug which to me sounds like extremely risky 
>>>> business but you guys seem to think it's a breeze...
>>>> 
>>>> WISH ME LUCK!
>>>> 
>>>> Dan
>>>> 
>>> 
>> 
>> _______________________________________________
>> 
>> Thanks everyone for supporting this list with your contributions.  Each and 
>> every one is greatly appreciated.  If you want to support the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray
>> 
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to