Joel, where do you find the database of sold vessels in Yachtworld?
> From: joel.aron...@gmail.com > Date: Sat, 6 Oct 2012 03:47:59 -0400 > To: cnc-list@cnc-list.com > Subject: Re: Stus-List Best price on a 1989 CNC 37+ > > Yachtworld maintains a database of sold vessels. It is more accurate > than the blue book. > Sounds like a boat listed in Spinsheet. If its the same boat and > that's all it needs it sounds like a bargain! I'd recommend a rigging > survey in addition to a survey. If it is rod rigging it may need to > be re-headed. Hope it works out for you! > > Joel > Sent from my iPad > > On Oct 5, 2012, at 11:50 PM, Rich Knowles <r...@sailpower.ca> wrote: > > > If there is enough battery power available, you could start the engine for > > a minute or so with no water. If there are no unusual mechanical noises, > > it's likely ok. > > > > Rich Knowles > > Indigo. LF38 > > Halifax > > > > On 2012-10-05, at 23:51, "David Roberts" <drobert...@comcast.net> wrote: > > > > We are getting ready to enter into negotiations on a 1989 CNC 37+. The boat > > is in fair condition and it has a few issues; it needs new upholstery; the > > keel joint needs to be re-glassed in; all the running rigging is ready to be > > replaced; it has a universal M35 and it looks like it had been over heated > > to the point of baking the some paint off of the heat exchanger closest to > > the muffler. The salesman said the engine was running when they took the > > boat in on trade, the boat is on the hard so I won't be able to run the > > engine until spring. Oh the boat has been on the hard 4 to 5 seasons, and > > the date on the oil filter is 2007. The salesman said they have had it that > > long because of the 7'3" draft, and a number of people have backed out after > > the appraisal over small issues. The sails are in good condition. I will of > > course get an appraisal once we agree on a price and if he finds something > > very big we will reconsider the offer. I have seen similar boats advertized > > anywhere from $89K to $119K of course there too is a range of conditions. > > What the asking price is and the final sale price ends up to be are not the > > same. Is there any way to find out what they are really selling for like a > > Kelly blue book for boats? Any input is appreciated. Also are there is any > > known issues I need to look for on this model. > > > > > > _______________________________________________ > > This List is provided by the C&C Photo Album > > http://www.cncphotoalbum.com > > CnC-List@cnc-list.com > > > > _______________________________________________ > > This List is provided by the C&C Photo Album > > http://www.cncphotoalbum.com > > CnC-List@cnc-list.com > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
