Download the GNS3 off of the GNS websiite,,
http://www.gns3.net/
To to the download link and grab the all in one package.. Then download
the 64bit Windows 7 separately.
Have you checked out the information on the IPExperts Blow on using
their Dynmips .net files?
Cheers
Joe
On 02/27/2012 08:01 AM, Pradip wrote:
Dear All,
I have below configuration in my laptop. Is this fine for working
around 10 routers.
I observed my laptop get hit near to palm where my hdd is location,,,
is this fine or any issue??
Please let us know which gns3 and ios I can use to do practice for
ccie lab..
Please share the gns3 and ios link
Regards -- Pradip patole
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Joe Danrich
Sent: 27 February 2012 10:38
To: Tim Miller
Cc: [email protected]
Subject: Re: [OSL | CCIE_RS] Dynamips / GNS3 64 Bit
Guys appreciate the comments from everyone..
I did get the 64bit GNS3 to run very on my quad-core i7 laptop with 8GB
RAM..
It appears so far to run more smoother than the 32bit on Windows 7..
I was able to tweak it and have the entire IPExperts Dynamips map
running with about 35-40% of the overall CPU(s) being used at the most.
So far this is initial without any IP Routing or the dreaded multi
cast.. ;-)
I setup separate hypervisors for each group of devices and in turn each
of them had their own idle-pc.. So far so good..
Cheers
Joe
On 02/26/2012 08:27 PM, Tim Miller wrote:
> I have no issues on Windows7 64bit and I can run the IPX topology
with 10% CPU load on a cheap i5 laptop with an SSD.
> - gotta use Idlemax and Idlepc values!!!!
> I'm using the GNS virtual box edition.
>
> Sent from my iPhone
>
> On Feb 26, 2012, at 7:57 PM, Bob McCouch<[email protected]> wrote:
>
>> Windows also has per-process memory limits which cap you at 6-8
>> routers per hypervisor, requiring you to use multiple instances of
>> Dynamips hypervisors. Linux doesn't have that restriction so you can
>> run a single hypervisor.
>>
>> Sent from my iPad
>>
>> On Feb 26, 2012, at 9:48 PM, Max Kamali<[email protected]> wrote:
>>
>>> I use the windows version for quick/small tests ( no more than 5
virtual
>>> routers) when I don't want to fire up my linux box. Cpu usage is
higher
>>> compared to linux. You may also run into issues with dynamips
crashing when
>>> booting about 8 or more routers, even with a boot-sequence delay.
>>>
>>> For heavy I'd recommend using linux.
>>>
>>> -max
>>>
>>> -----Original Message-----
>>> From: [email protected]
>>> [mailto:[email protected]] On Behalf Of Joe Danrich
>>> Sent: Sunday, February 26, 2012 6:21 PM
>>> To: [email protected]
>>> Subject: [OSL | CCIE_RS] Dynamips / GNS3 64 Bit
>>>
>>> Hello Peoples
>>>
>>> So on Windows 7 has anyone tried the 64Bit version of
Dynamips/GNS3 that is
>>> available as a stand-alone download?
>>>
>>> If so, any good, bad or ugly?
>>>
>>> Ta
>>>
>>> Joe
>>>
>>>
>>>
>>> _______________________________________________
>>> For more information regarding industry leading CCIE Lab training,
please
>>> visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>> http://onlinestudylist.com/mailman/listinfo/ccie_rs
>>>
>>> _______________________________________________
>>> For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
>>>
>>> http://onlinestudylist.com/mailman/listinfo/ccie_rs
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
>>
>> http://onlinestudylist.com/mailman/listinfo/ccie_rs
> _______________________________________________
> For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
>
> http://onlinestudylist.com/mailman/listinfo/ccie_rs
_______________________________________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus Database: 2114/4835 - Release Date: 02/27/12
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
