no my friend... i had my complete setup on my home, i had lots of routers and switches, check out on Google, search "site:chw.net CCIE CCNP CCNA", then goes to the site on any of the links, then page 10, and you'll see my lab on a picture of 2010 October...
now i had more equipment on my hands a pair of 6509E switches, and a few more routers ... :-) greetings. edgar On Mon, Feb 27, 2012 at 3:27 PM, Hoggins2 <[email protected]> wrote: > You have a 3560 switch on GNS? :| > Sent from my BlackBerry® wireless device > > -----Original Message----- > From: Edgar Mauricio Diaz Orellana <[email protected]> > Sender: [email protected] > Date: Mon, 27 Feb 2012 15:21:57 > To: Joe Danrich<[email protected]> > Cc: [email protected]<[email protected]> > Subject: Re: [OSL | CCIE_RS] Dynamips / GNS3 64 Bit > > 12 routers on my Dell Precision M6500, i7 and 16GB RAM, smooth on windows > 2008r2 enterprice... > > nothing to say, just idlemax 128.... just this tweak!, i could do almost > every lab on GNS3, and then i'll pass everything on my 2800, 3800 routers > and 3560 switches! :-) > > greetings. > > On Mon, Feb 27, 2012 at 2:14 AM, Joe Danrich <[email protected]> wrote: > > > I am running idlemax at 250 right now and once I get some routing > > protocols running then I'll start tweaking it some more.. > > > > allegedly, adding routing protocols may not matter in the grand scheme of > > things.. > > > > Ciao > > > > Joe > > > > > > On 02/26/2012 09:10 PM, Tim Miller wrote: > > > >> You forgot Idlemax = 100 > >> Place it right below your Idlepc setting in your .net file > >> That should get CPU down further... > >> > >> Sent from my iPhone > >> > >> On Feb 26, 2012, at 10:07 PM, Joe Danrich<[email protected]> wrote: > >> > >> Guys appreciate the comments from everyone.. > >>> > >>> I did get the 64bit GNS3 to run very on my quad-core i7 laptop with 8GB > >>> RAM.. > >>> > >>> It appears so far to run more smoother than the 32bit on Windows 7.. > >>> > >>> I was able to tweak it and have the entire IPExperts Dynamips map > >>> running with about 35-40% of the overall CPU(s) being used at the > most. So > >>> far this is initial without any IP Routing or the dreaded multi cast.. > ;-) > >>> > >>> I setup separate hypervisors for each group of devices and in turn each > >>> of them had their own idle-pc.. So far so good.. > >>> > >>> Cheers > >>> > >>> Joe > >>> > >>> > >>> > >>> On 02/26/2012 08:27 PM, Tim Miller wrote: > >>> > >>>> I have no issues on Windows7 64bit and I can run the IPX topology with > >>>> 10% CPU load on a cheap i5 laptop with an SSD. > >>>> - gotta use Idlemax and Idlepc values!!!! > >>>> I'm using the GNS virtual box edition. > >>>> > >>>> Sent from my iPhone > >>>> > >>>> On Feb 26, 2012, at 7:57 PM, Bob McCouch<[email protected]> wrote: > >>>> > >>>> Windows also has per-process memory limits which cap you at 6-8 > >>>>> routers per hypervisor, requiring you to use multiple instances of > >>>>> Dynamips hypervisors. Linux doesn't have that restriction so you can > >>>>> run a single hypervisor. > >>>>> > >>>>> Sent from my iPad > >>>>> > >>>>> On Feb 26, 2012, at 9:48 PM, Max Kamali<[email protected]> wrote: > >>>>> > >>>>> I use the windows version for quick/small tests ( no more than 5 > >>>>>> virtual > >>>>>> routers) when I don't want to fire up my linux box. Cpu usage is > >>>>>> higher > >>>>>> compared to linux. You may also run into issues with dynamips > >>>>>> crashing when > >>>>>> booting about 8 or more routers, even with a boot-sequence delay. > >>>>>> > >>>>>> For heavy I'd recommend using linux. > >>>>>> > >>>>>> -max > >>>>>> > >>>>>> -----Original Message----- > >>>>>> From: ccie_rs-bounces@**onlinestudylist.com< > [email protected]> > >>>>>> [mailto:ccie_rs-bounces@**onlinestudylist.com< > [email protected]>] > >>>>>> On Behalf Of Joe Danrich > >>>>>> Sent: Sunday, February 26, 2012 6:21 PM > >>>>>> To: [email protected] > >>>>>> Subject: [OSL | CCIE_RS] Dynamips / GNS3 64 Bit > >>>>>> > >>>>>> Hello Peoples > >>>>>> > >>>>>> So on Windows 7 has anyone tried the 64Bit version of Dynamips/GNS3 > >>>>>> that is > >>>>>> available as a stand-alone download? > >>>>>> > >>>>>> If so, any good, bad or ugly? > >>>>>> > >>>>>> Ta > >>>>>> > >>>>>> Joe > >>>>>> > >>>>>> > >>>>>> > >>>>>> ______________________________**_________________ > >>>>>> For more information regarding industry leading CCIE Lab training, > >>>>>> please > >>>>>> visit www.ipexpert.com > >>>>>> > >>>>>> Are you a CCNP or CCIE and looking for a job? Check out > >>>>>> www.PlatinumPlacement.com > >>>>>> > >>>>>> http://onlinestudylist.com/**mailman/listinfo/ccie_rs< > http://onlinestudylist.com/mailman/listinfo/ccie_rs> > >>>>>> > >>>>>> ______________________________**_________________ > >>>>>> For more information regarding industry leading CCIE Lab training, > >>>>>> please visit www.ipexpert.com > >>>>>> > >>>>>> Are you a CCNP or CCIE and looking for a job? Check out > >>>>>> www.PlatinumPlacement.com > >>>>>> > >>>>>> http://onlinestudylist.com/**mailman/listinfo/ccie_rs< > http://onlinestudylist.com/mailman/listinfo/ccie_rs> > >>>>>> > >>>>> ______________________________**_________________ > >>>>> For more information regarding industry leading CCIE Lab training, > >>>>> please visit www.ipexpert.com > >>>>> > >>>>> Are you a CCNP or CCIE and looking for a job? Check out > >>>>> www.PlatinumPlacement.com > >>>>> > >>>>> http://onlinestudylist.com/**mailman/listinfo/ccie_rs< > http://onlinestudylist.com/mailman/listinfo/ccie_rs> > >>>>> > >>>> ______________________________**_________________ > >>>> For more information regarding industry leading CCIE Lab training, > >>>> please visit www.ipexpert.com > >>>> > >>>> Are you a CCNP or CCIE and looking for a job? Check out > >>>> www.PlatinumPlacement.com > >>>> > >>>> http://onlinestudylist.com/**mailman/listinfo/ccie_rs< > http://onlinestudylist.com/mailman/listinfo/ccie_rs> > >>>> > >>> > > ______________________________**_________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com > > > > http://onlinestudylist.com/**mailman/listinfo/ccie_rs< > http://onlinestudylist.com/mailman/listinfo/ccie_rs> > > > > > > -- > > Edgar Díaz Orellana > CCENT/CCNA/CCNA Security, CCNP en progreso, CCSP pausado. > Kaspersky Administrator / Technical Specialist > Microsoft Certified Professional. > Celular : 09-94118996 > skype: eorellan1969 > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > -- Edgar Díaz Orellana CCENT/CCNA/CCNA Security, CCNP en progreso, CCSP pausado. Kaspersky Administrator / Technical Specialist Microsoft Certified Professional. Celular : 09-94118996 skype: eorellan1969 _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
