I have now finally heard of someone who has not one, but a pair of
6509's at their home.. I guess the local electric company loves you
every time you turn them on. :-)
I haven't tried Windows 2008r2 server yet.. When I was running it on
Windows 7 x64 I have a AMD Phenom II Quad-Core with 16GB RAM.
So far it appears to working quite well on that on a Kubuntu/Ubuntu
set-up I have. Splitting up the Hypervisors has really helped.
L8r
Joe
On 02/27/2012 10:43 AM, Edgar Mauricio Diaz Orellana wrote:
a really good switches are both in HSRP, just for fun... i guess i'm sell
those to grab some money to my written and for the LAB exam.
greetings.
edgar
On Mon, Feb 27, 2012 at 3:31 PM, Hoggins2<[email protected]> wrote:
**
Waoh - 6509 at home... Awesome - that's my core at the office... Nice
Israel
Sent from my BlackBerry® wireless device
------------------------------
*From: * Edgar Mauricio Diaz Orellana<[email protected]>
*Date: *Mon, 27 Feb 2012 15:30:01 -0300
*To: *<[email protected]>; [email protected]<
[email protected]>
*Subject: *Re: [OSL | CCIE_RS] Dynamips / GNS3 64 Bit
no my friend... i had my complete setup on my home, i had lots of routers
and switches, check out on
Google, search "site:chw.net CCIE CCNP CCNA", then goes to the site on
any of the links, then page 10,
and you'll see my lab on a picture of 2010 October...
now i had more equipment on my hands a pair of 6509E switches, and a few
more routers ... :-)
greetings.
edgar
On Mon, Feb 27, 2012 at 3:27 PM, Hoggins2<[email protected]> wrote:
You have a 3560 switch on GNS? :|
Sent from my BlackBerry® wireless device
-----Original Message-----
From: Edgar Mauricio Diaz Orellana<[email protected]>
Sender: [email protected]
Date: Mon, 27 Feb 2012 15:21:57
To: Joe Danrich<[email protected]>
Cc: [email protected]<[email protected]>
Subject: Re: [OSL | CCIE_RS] Dynamips / GNS3 64 Bit
12 routers on my Dell Precision M6500, i7 and 16GB RAM, smooth on windows
2008r2 enterprice...
nothing to say, just idlemax 128.... just this tweak!, i could do almost
every lab on GNS3, and then i'll pass everything on my 2800, 3800 routers
and 3560 switches! :-)
greetings.
On Mon, Feb 27, 2012 at 2:14 AM, Joe Danrich<[email protected]> wrote:
I am running idlemax at 250 right now and once I get some routing
protocols running then I'll start tweaking it some more..
allegedly, adding routing protocols may not matter in the grand scheme
of
things..
Ciao
Joe
On 02/26/2012 09:10 PM, Tim Miller wrote:
You forgot Idlemax = 100
Place it right below your Idlepc setting in your .net file
That should get CPU down further...
Sent from my iPhone
On Feb 26, 2012, at 10:07 PM, Joe Danrich<[email protected]> wrote:
Guys appreciate the comments from everyone..
I did get the 64bit GNS3 to run very on my quad-core i7 laptop with
8GB
RAM..
It appears so far to run more smoother than the 32bit on Windows 7..
I was able to tweak it and have the entire IPExperts Dynamips map
running with about 35-40% of the overall CPU(s) being used at the
most. So
far this is initial without any IP Routing or the dreaded multi
cast.. ;-)
I setup separate hypervisors for each group of devices and in turn
each
of them had their own idle-pc.. So far so good..
Cheers
Joe
On 02/26/2012 08:27 PM, Tim Miller wrote:
I have no issues on Windows7 64bit and I can run the IPX topology
with
10% CPU load on a cheap i5 laptop with an SSD.
- gotta use Idlemax and Idlepc values!!!!
I'm using the GNS virtual box edition.
Sent from my iPhone
On Feb 26, 2012, at 7:57 PM, Bob McCouch<[email protected]> wrote:
Windows also has per-process memory limits which cap you at 6-8
routers per hypervisor, requiring you to use multiple instances of
Dynamips hypervisors. Linux doesn't have that restriction so you can
run a single hypervisor.
Sent from my iPad
On Feb 26, 2012, at 9:48 PM, Max Kamali<[email protected]> wrote:
I use the windows version for quick/small tests ( no more than 5
virtual
routers) when I don't want to fire up my linux box. Cpu usage is
higher
compared to linux. You may also run into issues with dynamips
crashing when
booting about 8 or more routers, even with a boot-sequence delay.
For heavy I'd recommend using linux.
-max
-----Original Message-----
From: ccie_rs-bounces@**onlinestudylist.com<
[email protected]>
[mailto:ccie_rs-bounces@**onlinestudylist.com<
[email protected]>]
On Behalf Of Joe Danrich
Sent: Sunday, February 26, 2012 6:21 PM
To: [email protected]
Subject: [OSL | CCIE_RS] Dynamips / GNS3 64 Bit
Hello Peoples
So on Windows 7 has anyone tried the 64Bit version of Dynamips/GNS3
that is
available as a stand-alone download?
If so, any good, bad or ugly?
Ta
Joe
______________________________**_________________
For more information regarding industry leading CCIE Lab training,
please
visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/**mailman/listinfo/ccie_rs<
http://onlinestudylist.com/mailman/listinfo/ccie_rs>
______________________________**_________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/**mailman/listinfo/ccie_rs<
http://onlinestudylist.com/mailman/listinfo/ccie_rs>
______________________________**_________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/**mailman/listinfo/ccie_rs<
http://onlinestudylist.com/mailman/listinfo/ccie_rs>
______________________________**_________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/**mailman/listinfo/ccie_rs<
http://onlinestudylist.com/mailman/listinfo/ccie_rs>
______________________________**_________________
For more information regarding industry leading CCIE Lab training,
please
visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/**mailman/listinfo/ccie_rs<
http://onlinestudylist.com/mailman/listinfo/ccie_rs>
--
Edgar Díaz Orellana
CCENT/CCNA/CCNA Security, CCNP en progreso, CCSP pausado.
Kaspersky Administrator / Technical Specialist
Microsoft Certified Professional.
Celular : 09-94118996
skype: eorellan1969
_______________________________________________
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
--
Edgar Díaz Orellana
CCENT/CCNA/CCNA Security, CCNP en progreso, CCSP pausado.
Kaspersky Administrator / Technical Specialist
Microsoft Certified Professional.
Celular : 09-94118996
skype: eorellan1969
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
