The braille keyboard is enabled. I don't think this would have been the problem, since I can get responses from the braille keys once I restart brltty. I thought it might be a bluetooth issue but the problem arises whether the connection is bluetooth or USB. To recap ... when brltty is started at boot with systemd brlapi cannot read braile keys although it can read the control keys. To read all the keys, brltty needs to be restarted after boot.
On Tue, Jul 26, 2016 at 10:09 PM, Dave Mielke <d...@mielke.cc> wrote: > [quoted lines by Michael Katzmann on 2016/07/26 at 22:04 -0400] > > >If I run the brlapitest program I cannot get any response to input from > the > >eight braille keys on my connected device. I do get normal response from > >the routing keys (the Bralliant has three either side of the display, two > >at the bottom and four at the front) > > The Brailliant BI has a Braille Keyboard On/Off setting in its menu. From > your > description, it may be that you have Braille Keyboard set to Off. > > -- > Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of > God. > Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ > EMail: d...@mielke.cc | Canada K2A 1H7 | http://FamilyRadio.org/ > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: BRLTTY@mielke.cc > For general information, go to: http://mielke.cc/mailman/listinfo/brltty >
_______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
