I built a whole product line that did that back in 1990. 19.2 kbps on 450
splinter channels. Smokin!
From: Mike Hammett
Sent: Tuesday, September 1, 2020 9:03 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] Ultra low latency PTP
There is a whole other class of low-latency wireless gear. FEC is removed. ARQ
is nowhere to be found.
The radios are optimized so that the data spends as few picoseconds as possible
in the radio.
-----
Mike Hammett
Intelligent Computing Solutions
Midwest Internet Exchange
The Brothers WISP
--------------------------------------------------------------------------------
From: "Bill Prince" <part15...@gmail.com>
To: af@af.afmug.com
Sent: Tuesday, September 1, 2020 9:47:00 AM
Subject: Re: [AFMUG] Ultra low latency PTP
All the licensed gear I know of is full duplex, and should have near wire speed
latency. The latency should be proportional to the link distance.
bp
<part15sbs{at}gmail{dot}com>
On 9/1/2020 7:36 AM, Caleb Knauer wrote:
Anybody here up to date on current ultra low latency licensed PTP gear? Like
in HFT networks. Trying to round up the current players.
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--------------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
