hi, Ok, can you just try a straight up freebsd-head from two weeks ago and see if that changes the behaviour? That's odd, I'm not seeing any issues locally. Let's try to narrow down when things did and didn't work and we can move forward along the net80211/rtwn changes from there!
-adrian On Thu, 24 Apr 2025 at 14:31, Nuno Teixeira <edua...@freebsd.org> wrote: > (...) > > kldstat > 25 1 0xffffffff845be000 f017 if_rtwn_usb.ko > 26 1 0xffffffff845ce000 1b140 rtwn.ko > > Nuno Teixeira <edua...@freebsd.org> escreveu (quinta, 24/04/2025 à(s) > 22:29): > > > > freebsd > > > > wlans_rtwn0="wlan0" > > ifconfig_wlan0="WPA SYNCDHCP up" > > create_args_wlan0="country PT regdomain ETSI" > > > > Adrian Chadd <adrian.ch...@gmail.com> escreveu (quinta, 24/04/2025 à(s) > 22:06): > > > > > > > > > > > > On Thu, 24 Apr 2025 at 13:41, Nuno Teixeira <edua...@freebsd.org> > wrote: > > >> > > >> Hey! > > >> > > >> I remember having both cards working fine maybe in the last 3-5 days. > > >> I've spoted that someting isn't right wuth git taking too long too > pull. > > >> > > >> this is my /boot/loader.conf.local: > > >> > > >> compat.linuxkpi.80211.hw_crypto=1 > > >> compat.linuxkpi.iwlwifi_disable_11ac=0 > > >> compat.linuxkpi.iwlwifi_11n_disable=0 > > >> wlan_amrr_load="YES" > > >> > > > > > > Are you using the linux driver or the freebsd rtwn driver? > > > > > > > > > > > > -adrian > > > > > >> > > >> Cheers, > > >> > > >> Adrian Chadd <adrian.ch...@gmail.com> escreveu (quinta, 24/04/2025 > à(s) 21:34): > > >> > > > >> > > > >> > > > >> > On Thu, 24 Apr 2025 at 04:05, Nuno Teixeira <edua...@freebsd.org> > wrote: > > >> >> > > >> >> Hello, > > >> >> > > >> >> At main-n276705-e3e55936ce3b: Wed Apr 23, rtwn driver became almost > > >> >> useless on my amd64 and aarch64. > > >> >> > > >> >> Tested with RTL8811AU and RTL8821AU usb dongles. > > >> > > > >> > > > >> > hi! > > >> > > > >> > I'm using them at home and they're fine! So I am testing these! > > >> > > > >> > Do you know when it was last OK for you? > > >> > > > >> > > > >> > > > >> > -adrian > > >> > > > >> > > > >> > > > >> >> > > >> >> > > >> >> Should I open a PR? > > >> >> Any tips to debug this? > > >> >> > > >> >> Thanks, > > >> >> > > >> >> `git pull --rebase` takes too long time to complete and sometimes > fails. > > >> >> > > >> >> iperf3 shows bellow resilts on amd64/aarch64 with both cards. > > >> >> > > >> >> % iperf3 -c hp -R > > >> >> Connecting to host hp, port 5201 > > >> >> Reverse mode, remote host hp is sending > > >> >> [ 5] local 192.168.1.82 port 43550 connected to 192.168.1.100 > port 5201 > > >> >> [ ID] Interval Transfer Bitrate > > >> >> [ 5] 0.00-1.00 sec 0.00 Bytes 0.00 bits/sec > > >> >> [ 5] 1.00-2.06 sec 0.00 Bytes 0.00 bits/sec > > >> >> [ 5] 2.06-3.00 sec 128 KBytes 1.11 Mbits/sec > > >> >> [ 5] 3.00-4.03 sec 128 KBytes 1.02 Mbits/sec > > >> >> [ 5] 4.03-5.01 sec 0.00 Bytes 0.00 bits/sec > > >> >> [ 5] 5.01-6.01 sec 256 KBytes 2.10 Mbits/sec > > >> >> [ 5] 6.01-7.06 sec 0.00 Bytes 0.00 bits/sec > > >> >> [ 5] 7.06-8.06 sec 0.00 Bytes 0.00 bits/sec > > >> >> [ 5] 8.06-9.01 sec 0.00 Bytes 0.00 bits/sec > > >> >> [ 5] 9.01-10.01 sec 128 KBytes 1.04 Mbits/sec > > >> >> - - - - - - - - - - - - - - - - - - - - - - - - - > > >> >> [ ID] Interval Transfer Bitrate Retr > > >> >> [ 5] 0.00-10.01 sec 768 KBytes 628 Kbits/sec 156 > sender > > >> >> [ 5] 0.00-10.01 sec 640 KBytes 524 Kbits/sec > receiver > > >> >> > > >> >> iperf Done. > > >> >> > > >> >> -- > > >> >> Nuno Teixeira > > >> >> FreeBSD UNIX: <edua...@freebsd.org> Web: https://FreeBSD.org > > >> >> > > >> > > >> > > >> -- > > >> Nuno Teixeira > > >> FreeBSD UNIX: <edua...@freebsd.org> Web: https://FreeBSD.org > > > > > > > > -- > > Nuno Teixeira > > FreeBSD UNIX: <edua...@freebsd.org> Web: https://FreeBSD.org > > > > -- > Nuno Teixeira > FreeBSD UNIX: <edua...@freebsd.org> Web: https://FreeBSD.org >
