On Thu, 24 Apr 2025 at 04:05, Nuno Teixeira <edua...@freebsd.org> wrote:

> Hello,
>
> At main-n276705-e3e55936ce3b: Wed Apr 23, rtwn driver became almost
> useless on my amd64 and aarch64.
>
> Tested with RTL8811AU and RTL8821AU usb dongles.
>

hi!

I'm using them at home and they're fine! So I am testing these!

Do you know when it was last OK for you?



-adrian




>
> Should I open a PR?
> Any tips to debug this?
>
> Thanks,
>
> `git pull --rebase` takes too long time to complete and sometimes fails.
>
> iperf3 shows bellow resilts on amd64/aarch64 with both cards.
>
> % iperf3 -c hp -R
> Connecting to host hp, port 5201
> Reverse mode, remote host hp is sending
> [  5] local 192.168.1.82 port 43550 connected to 192.168.1.100 port 5201
> [ ID] Interval           Transfer     Bitrate
> [  5]   0.00-1.00   sec  0.00 Bytes  0.00 bits/sec
> [  5]   1.00-2.06   sec  0.00 Bytes  0.00 bits/sec
> [  5]   2.06-3.00   sec   128 KBytes  1.11 Mbits/sec
> [  5]   3.00-4.03   sec   128 KBytes  1.02 Mbits/sec
> [  5]   4.03-5.01   sec  0.00 Bytes  0.00 bits/sec
> [  5]   5.01-6.01   sec   256 KBytes  2.10 Mbits/sec
> [  5]   6.01-7.06   sec  0.00 Bytes  0.00 bits/sec
> [  5]   7.06-8.06   sec  0.00 Bytes  0.00 bits/sec
> [  5]   8.06-9.01   sec  0.00 Bytes  0.00 bits/sec
> [  5]   9.01-10.01  sec   128 KBytes  1.04 Mbits/sec
> - - - - - - - - - - - - - - - - - - - - - - - - -
> [ ID] Interval           Transfer     Bitrate         Retr
> [  5]   0.00-10.01  sec   768 KBytes   628 Kbits/sec  156            sender
> [  5]   0.00-10.01  sec   640 KBytes   524 Kbits/sec
> receiver
>
> iperf Done.
>
> --
> Nuno Teixeira
> FreeBSD UNIX:  <edua...@freebsd.org>   Web:  https://FreeBSD.org
>
>

Reply via email to