Hey!

I remember having both cards working fine maybe in the last 3-5 days.
I've spoted that someting isn't right wuth git taking too long too pull.

this is my /boot/loader.conf.local:

compat.linuxkpi.80211.hw_crypto=1
compat.linuxkpi.iwlwifi_disable_11ac=0
compat.linuxkpi.iwlwifi_11n_disable=0
wlan_amrr_load="YES"

Cheers,

Adrian Chadd <adrian.ch...@gmail.com> escreveu (quinta, 24/04/2025 à(s) 21:34):
>
>
>
> On Thu, 24 Apr 2025 at 04:05, Nuno Teixeira <edua...@freebsd.org> wrote:
>>
>> Hello,
>>
>> At main-n276705-e3e55936ce3b: Wed Apr 23, rtwn driver became almost
>> useless on my amd64 and aarch64.
>>
>> Tested with RTL8811AU and RTL8821AU usb dongles.
>
>
> hi!
>
> I'm using them at home and they're fine! So I am testing these!
>
> Do you know when it was last OK for you?
>
>
>
> -adrian
>
>
>
>>
>>
>> Should I open a PR?
>> Any tips to debug this?
>>
>> Thanks,
>>
>> `git pull --rebase` takes too long time to complete and sometimes fails.
>>
>> iperf3 shows bellow resilts on amd64/aarch64 with both cards.
>>
>> % iperf3 -c hp -R
>> Connecting to host hp, port 5201
>> Reverse mode, remote host hp is sending
>> [  5] local 192.168.1.82 port 43550 connected to 192.168.1.100 port 5201
>> [ ID] Interval           Transfer     Bitrate
>> [  5]   0.00-1.00   sec  0.00 Bytes  0.00 bits/sec
>> [  5]   1.00-2.06   sec  0.00 Bytes  0.00 bits/sec
>> [  5]   2.06-3.00   sec   128 KBytes  1.11 Mbits/sec
>> [  5]   3.00-4.03   sec   128 KBytes  1.02 Mbits/sec
>> [  5]   4.03-5.01   sec  0.00 Bytes  0.00 bits/sec
>> [  5]   5.01-6.01   sec   256 KBytes  2.10 Mbits/sec
>> [  5]   6.01-7.06   sec  0.00 Bytes  0.00 bits/sec
>> [  5]   7.06-8.06   sec  0.00 Bytes  0.00 bits/sec
>> [  5]   8.06-9.01   sec  0.00 Bytes  0.00 bits/sec
>> [  5]   9.01-10.01  sec   128 KBytes  1.04 Mbits/sec
>> - - - - - - - - - - - - - - - - - - - - - - - - -
>> [ ID] Interval           Transfer     Bitrate         Retr
>> [  5]   0.00-10.01  sec   768 KBytes   628 Kbits/sec  156            sender
>> [  5]   0.00-10.01  sec   640 KBytes   524 Kbits/sec                  
>> receiver
>>
>> iperf Done.
>>
>> --
>> Nuno Teixeira
>> FreeBSD UNIX:  <edua...@freebsd.org>   Web:  https://FreeBSD.org
>>


-- 
Nuno Teixeira
FreeBSD UNIX:  <edua...@freebsd.org>   Web:  https://FreeBSD.org

Reply via email to