freebsd wlans_rtwn0="wlan0" ifconfig_wlan0="WPA SYNCDHCP up" create_args_wlan0="country PT regdomain ETSI"
Adrian Chadd <adrian.ch...@gmail.com> escreveu (quinta, 24/04/2025 à(s) 22:06): > > > > On Thu, 24 Apr 2025 at 13:41, Nuno Teixeira <edua...@freebsd.org> wrote: >> >> Hey! >> >> I remember having both cards working fine maybe in the last 3-5 days. >> I've spoted that someting isn't right wuth git taking too long too pull. >> >> this is my /boot/loader.conf.local: >> >> compat.linuxkpi.80211.hw_crypto=1 >> compat.linuxkpi.iwlwifi_disable_11ac=0 >> compat.linuxkpi.iwlwifi_11n_disable=0 >> wlan_amrr_load="YES" >> > > Are you using the linux driver or the freebsd rtwn driver? > > > > -adrian > >> >> Cheers, >> >> Adrian Chadd <adrian.ch...@gmail.com> escreveu (quinta, 24/04/2025 à(s) >> 21:34): >> > >> > >> > >> > On Thu, 24 Apr 2025 at 04:05, Nuno Teixeira <edua...@freebsd.org> wrote: >> >> >> >> Hello, >> >> >> >> At main-n276705-e3e55936ce3b: Wed Apr 23, rtwn driver became almost >> >> useless on my amd64 and aarch64. >> >> >> >> Tested with RTL8811AU and RTL8821AU usb dongles. >> > >> > >> > hi! >> > >> > I'm using them at home and they're fine! So I am testing these! >> > >> > Do you know when it was last OK for you? >> > >> > >> > >> > -adrian >> > >> > >> > >> >> >> >> >> >> Should I open a PR? >> >> Any tips to debug this? >> >> >> >> Thanks, >> >> >> >> `git pull --rebase` takes too long time to complete and sometimes fails. >> >> >> >> iperf3 shows bellow resilts on amd64/aarch64 with both cards. >> >> >> >> % iperf3 -c hp -R >> >> Connecting to host hp, port 5201 >> >> Reverse mode, remote host hp is sending >> >> [ 5] local 192.168.1.82 port 43550 connected to 192.168.1.100 port 5201 >> >> [ ID] Interval Transfer Bitrate >> >> [ 5] 0.00-1.00 sec 0.00 Bytes 0.00 bits/sec >> >> [ 5] 1.00-2.06 sec 0.00 Bytes 0.00 bits/sec >> >> [ 5] 2.06-3.00 sec 128 KBytes 1.11 Mbits/sec >> >> [ 5] 3.00-4.03 sec 128 KBytes 1.02 Mbits/sec >> >> [ 5] 4.03-5.01 sec 0.00 Bytes 0.00 bits/sec >> >> [ 5] 5.01-6.01 sec 256 KBytes 2.10 Mbits/sec >> >> [ 5] 6.01-7.06 sec 0.00 Bytes 0.00 bits/sec >> >> [ 5] 7.06-8.06 sec 0.00 Bytes 0.00 bits/sec >> >> [ 5] 8.06-9.01 sec 0.00 Bytes 0.00 bits/sec >> >> [ 5] 9.01-10.01 sec 128 KBytes 1.04 Mbits/sec >> >> - - - - - - - - - - - - - - - - - - - - - - - - - >> >> [ ID] Interval Transfer Bitrate Retr >> >> [ 5] 0.00-10.01 sec 768 KBytes 628 Kbits/sec 156 >> >> sender >> >> [ 5] 0.00-10.01 sec 640 KBytes 524 Kbits/sec >> >> receiver >> >> >> >> iperf Done. >> >> >> >> -- >> >> Nuno Teixeira >> >> FreeBSD UNIX: <edua...@freebsd.org> Web: https://FreeBSD.org >> >> >> >> >> -- >> Nuno Teixeira >> FreeBSD UNIX: <edua...@freebsd.org> Web: https://FreeBSD.org -- Nuno Teixeira FreeBSD UNIX: <edua...@freebsd.org> Web: https://FreeBSD.org