(...)

kldstat
25    1 0xffffffff845be000     f017 if_rtwn_usb.ko
26    1 0xffffffff845ce000    1b140 rtwn.ko

Nuno Teixeira <edua...@freebsd.org> escreveu (quinta, 24/04/2025 à(s) 22:29):
>
> freebsd
>
> wlans_rtwn0="wlan0"
> ifconfig_wlan0="WPA SYNCDHCP up"
> create_args_wlan0="country PT regdomain ETSI"
>
> Adrian Chadd <adrian.ch...@gmail.com> escreveu (quinta, 24/04/2025 à(s) 
> 22:06):
> >
> >
> >
> > On Thu, 24 Apr 2025 at 13:41, Nuno Teixeira <edua...@freebsd.org> wrote:
> >>
> >> Hey!
> >>
> >> I remember having both cards working fine maybe in the last 3-5 days.
> >> I've spoted that someting isn't right wuth git taking too long too pull.
> >>
> >> this is my /boot/loader.conf.local:
> >>
> >> compat.linuxkpi.80211.hw_crypto=1
> >> compat.linuxkpi.iwlwifi_disable_11ac=0
> >> compat.linuxkpi.iwlwifi_11n_disable=0
> >> wlan_amrr_load="YES"
> >>
> >
> > Are you using the linux driver or the freebsd rtwn driver?
> >
> >
> >
> > -adrian
> >
> >>
> >> Cheers,
> >>
> >> Adrian Chadd <adrian.ch...@gmail.com> escreveu (quinta, 24/04/2025 à(s) 
> >> 21:34):
> >> >
> >> >
> >> >
> >> > On Thu, 24 Apr 2025 at 04:05, Nuno Teixeira <edua...@freebsd.org> wrote:
> >> >>
> >> >> Hello,
> >> >>
> >> >> At main-n276705-e3e55936ce3b: Wed Apr 23, rtwn driver became almost
> >> >> useless on my amd64 and aarch64.
> >> >>
> >> >> Tested with RTL8811AU and RTL8821AU usb dongles.
> >> >
> >> >
> >> > hi!
> >> >
> >> > I'm using them at home and they're fine! So I am testing these!
> >> >
> >> > Do you know when it was last OK for you?
> >> >
> >> >
> >> >
> >> > -adrian
> >> >
> >> >
> >> >
> >> >>
> >> >>
> >> >> Should I open a PR?
> >> >> Any tips to debug this?
> >> >>
> >> >> Thanks,
> >> >>
> >> >> `git pull --rebase` takes too long time to complete and sometimes fails.
> >> >>
> >> >> iperf3 shows bellow resilts on amd64/aarch64 with both cards.
> >> >>
> >> >> % iperf3 -c hp -R
> >> >> Connecting to host hp, port 5201
> >> >> Reverse mode, remote host hp is sending
> >> >> [  5] local 192.168.1.82 port 43550 connected to 192.168.1.100 port 5201
> >> >> [ ID] Interval           Transfer     Bitrate
> >> >> [  5]   0.00-1.00   sec  0.00 Bytes  0.00 bits/sec
> >> >> [  5]   1.00-2.06   sec  0.00 Bytes  0.00 bits/sec
> >> >> [  5]   2.06-3.00   sec   128 KBytes  1.11 Mbits/sec
> >> >> [  5]   3.00-4.03   sec   128 KBytes  1.02 Mbits/sec
> >> >> [  5]   4.03-5.01   sec  0.00 Bytes  0.00 bits/sec
> >> >> [  5]   5.01-6.01   sec   256 KBytes  2.10 Mbits/sec
> >> >> [  5]   6.01-7.06   sec  0.00 Bytes  0.00 bits/sec
> >> >> [  5]   7.06-8.06   sec  0.00 Bytes  0.00 bits/sec
> >> >> [  5]   8.06-9.01   sec  0.00 Bytes  0.00 bits/sec
> >> >> [  5]   9.01-10.01  sec   128 KBytes  1.04 Mbits/sec
> >> >> - - - - - - - - - - - - - - - - - - - - - - - - -
> >> >> [ ID] Interval           Transfer     Bitrate         Retr
> >> >> [  5]   0.00-10.01  sec   768 KBytes   628 Kbits/sec  156            
> >> >> sender
> >> >> [  5]   0.00-10.01  sec   640 KBytes   524 Kbits/sec                  
> >> >> receiver
> >> >>
> >> >> iperf Done.
> >> >>
> >> >> --
> >> >> Nuno Teixeira
> >> >> FreeBSD UNIX:  <edua...@freebsd.org>   Web:  https://FreeBSD.org
> >> >>
> >>
> >>
> >> --
> >> Nuno Teixeira
> >> FreeBSD UNIX:  <edua...@freebsd.org>   Web:  https://FreeBSD.org
>
>
>
> --
> Nuno Teixeira
> FreeBSD UNIX:  <edua...@freebsd.org>   Web:  https://FreeBSD.org



-- 
Nuno Teixeira
FreeBSD UNIX:  <edua...@freebsd.org>   Web:  https://FreeBSD.org

Reply via email to