(...) I can reproduce this in amd64 with an RTL8811AU (Archer T2U Nano) (main-n276705-e3e55936ce3b CLEAN) and aarch64 with RTL8821AU (Archer T2U PLUS) main-n276724-67981d736e9d TWO REVERTS)
Nuno Teixeira <edua...@freebsd.org> escreveu (quinta, 24/04/2025 à(s) 21:40): > > Hey! > > I remember having both cards working fine maybe in the last 3-5 days. > I've spoted that someting isn't right wuth git taking too long too pull. > > this is my /boot/loader.conf.local: > > compat.linuxkpi.80211.hw_crypto=1 > compat.linuxkpi.iwlwifi_disable_11ac=0 > compat.linuxkpi.iwlwifi_11n_disable=0 > wlan_amrr_load="YES" > > Cheers, > > Adrian Chadd <adrian.ch...@gmail.com> escreveu (quinta, 24/04/2025 à(s) > 21:34): > > > > > > > > On Thu, 24 Apr 2025 at 04:05, Nuno Teixeira <edua...@freebsd.org> wrote: > >> > >> Hello, > >> > >> At main-n276705-e3e55936ce3b: Wed Apr 23, rtwn driver became almost > >> useless on my amd64 and aarch64. > >> > >> Tested with RTL8811AU and RTL8821AU usb dongles. > > > > > > hi! > > > > I'm using them at home and they're fine! So I am testing these! > > > > Do you know when it was last OK for you? > > > > > > > > -adrian > > > > > > > >> > >> > >> Should I open a PR? > >> Any tips to debug this? > >> > >> Thanks, > >> > >> `git pull --rebase` takes too long time to complete and sometimes fails. > >> > >> iperf3 shows bellow resilts on amd64/aarch64 with both cards. > >> > >> % iperf3 -c hp -R > >> Connecting to host hp, port 5201 > >> Reverse mode, remote host hp is sending > >> [ 5] local 192.168.1.82 port 43550 connected to 192.168.1.100 port 5201 > >> [ ID] Interval Transfer Bitrate > >> [ 5] 0.00-1.00 sec 0.00 Bytes 0.00 bits/sec > >> [ 5] 1.00-2.06 sec 0.00 Bytes 0.00 bits/sec > >> [ 5] 2.06-3.00 sec 128 KBytes 1.11 Mbits/sec > >> [ 5] 3.00-4.03 sec 128 KBytes 1.02 Mbits/sec > >> [ 5] 4.03-5.01 sec 0.00 Bytes 0.00 bits/sec > >> [ 5] 5.01-6.01 sec 256 KBytes 2.10 Mbits/sec > >> [ 5] 6.01-7.06 sec 0.00 Bytes 0.00 bits/sec > >> [ 5] 7.06-8.06 sec 0.00 Bytes 0.00 bits/sec > >> [ 5] 8.06-9.01 sec 0.00 Bytes 0.00 bits/sec > >> [ 5] 9.01-10.01 sec 128 KBytes 1.04 Mbits/sec > >> - - - - - - - - - - - - - - - - - - - - - - - - - > >> [ ID] Interval Transfer Bitrate Retr > >> [ 5] 0.00-10.01 sec 768 KBytes 628 Kbits/sec 156 sender > >> [ 5] 0.00-10.01 sec 640 KBytes 524 Kbits/sec > >> receiver > >> > >> iperf Done. > >> > >> -- > >> Nuno Teixeira > >> FreeBSD UNIX: <edua...@freebsd.org> Web: https://FreeBSD.org > >> > > > -- > Nuno Teixeira > FreeBSD UNIX: <edua...@freebsd.org> Web: https://FreeBSD.org -- Nuno Teixeira FreeBSD UNIX: <edua...@freebsd.org> Web: https://FreeBSD.org
