Hallo wenn ich das ganze System aber neu erstellt habe. Ich mich dabe an die Vorgaben von folgender Aneitung https://weewx.com/docs/5.1/quickstarts/debian/ gehalten habe. Dann erstehe ich nicht wo das Problem liegt. Muss ich bei der erstellung eines neuen Raspberry System etawas beachten? Oder bevor ich weewx installiere?
Danke für alles! Hello if I have recreated the whole system though. I have adhered to the specifications of the following https://weewx.com/docs/5.1/quickstarts/debian/. Then I don't see where the problem lies. Do I have to pay attention to anything when creating a new Raspberry system? Or before I install weewx? Thanks for all! EdwinZ schrieb am Sonntag, 25. August 2024 um 14:10:33 UTC+2: > Hi Guenther, to be this looks more like an access control problem (" > Permission denied: '/etc/weewx/weewx.conf"). As since recently WeeWX moved > from root to the weewx user, I guess this may be your problem. > Please read > https://github.com/weewx/weewx/wiki/WeeWX-Frequently-Asked-Questions#why-do-i-get-permission-denied > > and https://weewx.com/docs/5.1/upgrade/#weewx-runs-as-the-weewx-user > > For me all the files in /etc/weewx are owned by the weewx user and group. > > Hope this helps! > Edwin > On Sunday, August 25, 2024 at 10:27:51 AM UTC+2 Günther Wrana wrote: > >> Hi, I can't even reconfigure the program with this weectl station >> reconfigure command. >> So I don't need to try to install other drivers yet. >> The driver I would need cannot be installed. >> But thanks for the information. >> >> >> Hallo ich kann das Programm mit diesem Befehl weectl station reconfigure >> nicht einmal neu konfigurieren. >> Also brauche ich auch noch nicht versuchen andere Treiber zu installieren. >> Den Treiber den ich brauchen würde lässt sich nicht installieren. >> Aber danke für die Informationen. >> >> >> >> Kalli schrieb am Samstag, 24. August 2024 um 17:57:10 UTC+2: >> >> Hello, I have copied the driver data into the intended directories, try >> that. Unfortunately I don't remember what they were, but I'll take a look. >> Hallo ich habe die Treiber daten in die dafür vorgesehenen Verzeichnisse >> kopiert , versuche das mal. Ich weis leider nicht mehr welsche das waren, >> aber ich schaue mal nach. >> >> Am 24.08.2024 um 17:14 schrieb Günther Wrana <kawa...@gmail.com>: >> >> Hello and again it's me, Günther Wrana from Austria, who can't install >> the driver for the Renkforce Wh2315. >> Does it no longer work the driver or what have I once again not installed >> correctly. >> >> As you can see below, I installed weewx on my Raspberry and chose the >> simulation driver. >> I then tried to choose a new driver with the weectl station reconfigure >> command. >> >> Even before I tried to install the driver for my Renkforce Wh2315. >> Not even that worked, so what's wrong and what's the problem? >> >> Thanks for the help Günther >> >> >> Hallo und wieder bin es ich Günther Wrana aus Österreich der den Treiber >> für die Renkforce Wh2315 nicht installieren kann. >> Funktioniert es nun nicht mehr der Treiber oder was habe ich nun wieder >> einmal nicht richtig installiert. >> >> Wie Ihr unten sehen könnt habe ich weewx auf meinem Raspberry installiert >> und den Simulation Treiber gewählt. >> Ich habe danach mit dem Befehl weectl station reconfigure versucht einen >> neuen Treiber zu wählen. >> >> Noch bevor ich den Treiber für meine Renkforce Wh2315 zu installieren >> versuch habe. >> Nicht einmal das hat funktioniert also was ist falsch und wo liegt das >> Problem? >> >> Danke für die Hilfe Günther >> >> >> 32GB@32GB:~/Downloads $ sudo systemctl start weewx >> 32GB@32GB:~/Downloads $ sudo systemctl status weewx >> ● weewx.service - WeeWX >> Loaded: loaded (/lib/systemd/system/weewx.service; enabled; preset: >> enabled) >> Active: active (running) since Sat 2024-08-24 16:58:57 CEST; 2s ago >> Docs: https://weewx.com/docs >> Main PID: 4631 (python3) >> Tasks: 1 (limit: 755) >> CPU: 784ms >> CGroup: /system.slice/weewx.service >> └─4631 python3 /usr/share/weewx/weewxd.py >> /etc/weewx/weewx.conf >> >> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.restx: CWOP: Posting not >> enabled. >> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.restx: WOW: Posting not >> enabled. >> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.restx: AWEKAS: Posting not >> enabled. >> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: 'pyephem' detected, >> extended almanac data is available >> Aug 24 16:58:58 32GB weewxd[4631]: INFO __main__: Starting up weewx >> version 5.1.0 >> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: Clock error is >> -0.26 seconds (positive is fast) >> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: Using binding >> 'wx_binding' to database 'weewx.sdb' >> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.manager: Starting backfill >> of daily summaries >> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.manager: Daily summaries up >> to date >> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: Starting main >> packet loop. >> >> >> 32GB@32GB:~/Downloads $ weectl station reconfigure >> Error parsing config file: [Errno 13] Permission denied: >> '/etc/weewx/weewx.conf' >> Traceback (most recent call last): >> File "/usr/share/weewx/weeutil/startup.py", line 86, in start_app >> config_path, config_dict = weecfg.read_config(config_option, >> [config_arg]) >> >> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ >> File "/usr/share/weewx/weecfg/__init__.py", line 150, in read_config >> config_dict = configobj.ConfigObj(config_path, >> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ >> File "/usr/lib/python3/dist-packages/configobj/__init__.py", line 1229, >> in __init__ >> self._load(infile, configspec) >> File "/usr/lib/python3/dist-packages/configobj/__init__.py", line 1236, >> in _load >> with open(infile, 'rb') as h: >> ^^^^^^^^^^^^^^^^^^ >> PermissionError: [Errno 13] Permission denied: '/etc/weewx/weewx.conf' >> 32GB@32GB:~/Downloads $ >> >> Tom Keffer schrieb am Samstag, 6. April 2024 um 14:46:09 UTC+2: >> >> I was just going to point that out! >> >> With V5, it's actually easiest to install directly from the URL: >> >> *weectl extension >> install https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip >> <https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip>* >> >> >> >> On Fri, Apr 5, 2024 at 10:53 PM Günther Wrana <kawa...@gmail.com> wrote: >> >> Hello, I think I have solved the problem. >> The driver from the following link wget -O weewx-wh23xx.zip >> https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip >> works, at least there is no error message when reconfiguring the weather >> cities. >> >> Thanks for the help and I'll definitely need something from YOU again >> soon. >> Another nice day from Austria >> >> >> Hallo ich glaube ich habe das Problem gelöst. >> Der Treiber von folgendem Link wget -O weewx-wh23xx.zip >> https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip >> funktioniert zumindest kommt keine Fehlermeldung bei der Rekonfiguration >> der Wetterstadtionen. >> >> Danke für die Hilfe und ich brauche sicher bald wieder etwas von EUCH. >> Noch einen schönen Tag aus Österreich >> >> >> >> 64GB@64GB:~/Downloads $ rm weewx-wh23xx.zip >> 64GB@64GB:~/Downloads $ wget -O weewx-wh23xx.zip >> https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip >> --2024-04-06 07:40:19-- >> https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip >> Resolving github.com (github.com)... 140.82.121.4 >> Connecting to github.com (github.com)|140.82.121.4|:443... connected. >> HTTP request sent, awaiting response... 302 Found >> Location: >> https://codeload.github.com/EdwinGH/weewx-wh23xx/zip/refs/heads/master >> [following] >> --2024-04-06 07:40:20-- >> https://codeload.github.com/EdwinGH/weewx-wh23xx/zip/refs/heads/master >> Resolving codeload.github.com (codeload.github.com)... 140.82.121.10 >> Connecting to codeload.github.com >> (codeload.github.com)|140.82.121.10|:443... >> connected. >> HTTP request sent, awaiting response... 200 OK >> Length: unspecified [application/zip] >> Saving to: ‘weewx-wh23xx.zip’ >> >> weewx-wh23xx.zip [ <=> ] 24.88K --.-KB/s in >> 0.03s >> >> 2024-04-06 07:40:20 (739 KB/s) - ‘weewx-wh23xx.zip’ saved [25472] >> >> 64GB@64GB:~/Downloads $ dir >> weewx-wh23xx.zip >> 64GB@64GB:~/Downloads $ weectl extension install weewx-wh23xx.zip >> Using configuration file /etc/weewx/weewx.conf >> Install extension 'weewx-wh23xx.zip' (y/n)? y >> Extracting from zip archive weewx-wh23xx.zip >> Saving installer file to /etc/weewx/bin/user/installer/wh23xx >> Finished installing extension wh23xx from weewx-wh23xx.zip >> 64GB@64GB:~/Downloads $ weectl station reconfigure >> Using configuration file /etc/weewx/weewx.conf >> Processing configuration file /etc/weewx/weewx.conf >> >> Give a description of the station. This will be used for the title of >> reports. >> description [2243 Matzen,Österreich Niederösterreich ]: >> >> Specify altitude, with units 'foot' or 'meter'. For example: >> 35, foot >> 12, meter >> altitude [199, meter]: >> >> Specify latitude in decimal degrees, negative for south. >> latitude [48.401826]: >> Specify longitude in decimal degrees, negative for west. >> longitude [16.686539]: >> >> Choose a unit system for the reports. Later, you can modify >> your choice, or choose a combination of units. Unit systems >> include: >> us (ºF, inHg, in, mph) >> metricwx (ºC, mbar, mm, m/s) >> metric (ºC, mbar, cm, km/h) >> unit system [metricwx]: >> >> Choose a driver. Installed drivers include: >> 0) WH23xx (user.wh23xx) >> 1) AcuRite (weewx.drivers.acurite) >> 2) CC3000 (weewx.drivers.cc3000) >> 3) FineOffsetUSB (weewx.drivers.fousb) >> 4) Simulator (weewx.drivers.simulator) >> 5) TE923 (weewx.drivers.te923) >> 6) Ultimeter (weewx.drivers.ultimeter) >> 7) Vantage (weewx.drivers.vantage) >> 8) WMR100 (weewx.drivers.wmr100) >> 9) WMR300 (weewx.drivers.wmr300) >> 10) WMR9x8 (weewx.drivers.wmr9x8) >> 11) WS1 (weewx.drivers.ws1) >> 12) WS23xx (weewx.drivers.ws23xx) >> 13) WS28xx (weewx.drivers.ws28xx) >> driver [4]: 0 >> >> You can register the station on weewx.com, where it will be included in a >> map. If you choose to register, you will also need a unique URL to >> identify >> the station (such as a website, or a WeatherUnderground link). >> register this station (y/n)? [y] y >> >> Now give a unique URL for the station. A Weather Underground >> URL such as https://www.wunderground.com/dashboard/pws/KORPORT12 will do. >> Unique URL [http://guentherwrana.ddns.net]: >> Saving configuration file /etc/weewx/weewx.conf >> Saved old configuration file as /etc/weewx/weewx.conf.20240406074122 >> 64GB@64GB:~/Downloads $ weectl --version >> weectl 5.0.2 >> 64GB@64GB:~/Downloads $ >> >> >> Tom Keffer schrieb am Donnerstag, 4. April 2024 um 18:27:45 UTC+2: >> >> Günther? >> >> On Mon, Apr 1, 2024 at 9:19 AM Tom Keffer <tke...@gmail.com> wrote: >> >> Two things: >> >> 1. You are still using the original version of the driver. You want my >> patched version at https://github.com/tkeffer/weewx-wh23xx >> 2. What version of weewx are you using? Early beta versions of v5.0 could >> not recognize a zip file, but current releases do. >> >> * weectl --version* >> >> >> On Mon, Apr 1, 2024 at 8:48 AM Günther Wrana <kawa...@gmail.com> wrote: >> >> Hello, this is the message when I install the driver and try to select >> when reconfiguring >> >> Thanks Günther >> >> Hallo das ist die Meldung wenn ich den Treiber installiere und versuche >> bei der Rekonfiguration auszuwählen >> >> Danke Günther >> >> >> >> 64GB@64GB:~/Downloads $ wget -O weewx-wh23xx.zip >> https://github.com/matthewwall/weewx-wh23xx/archive/master.zip >> --2024-04-01 17:27:53-- >> https://github.com/matthewwall/weewx-wh23xx/archive/master.zip >> Resolving github.com (github.com)... 140.82.121.3 >> Connecting to github.com (github.com)|140.82.121.3|:443... connected. >> HTTP request sent, awaiting response... 302 Found >> Location: >> https://codeload.github.com/matthewwall/weewx-wh23xx/zip/refs/heads/master >> [following] >> --2024-04-01 17:27:53-- >> https://codeload.github.com/matthewwall/weewx-wh23xx/zip/refs/heads/master >> Resolving codeload.github.com (codeload.github.com)... 140.82.121.9 >> Connecting to codeload.github.com (codeload.github.com)|140.82.121.9|:443... >> connected. >> HTTP request sent, awaiting response... 200 OK >> Length: unspecified [application/zip] >> Saving to: ‘weewx-wh23xx.zip’ >> >> weewx-wh23xx.zip [ <=> ] 23.64K --.-KB/s in >> 0.03s >> >> 2024-04-01 17:27:54 (837 KB/s) - ‘weewx-wh23xx.zip’ saved [24210] >> >> 64GB@64GB:~/Downloads $ weectl extension install weewx-wh23xx-master.zip >> Using configuration file /etc/weewx/weewx.conf >> Install extension 'weewx-wh23xx-master.zip' (y/n)? y >> Traceback (most recent call last): >> File "/usr/share/weewx/weectl.py", line 74, in <module> >> main() >> File "/usr/share/weewx/weectl.py", line 66, in main >> namespace.func(namespace) >> File "/usr/share/weewx/weectllib/__init__.py", line 121, in dispatch >> namespace.action_func(config_dict, namespace) >> File "/usr/share/weewx/weectllib/extension_cmd.py", line 116, in >> install_extension >> ext.install_extension(namespace.source, no_confirm=namespace.yes) >> File "/usr/share/weewx/weecfg/extension.py", line 143, in >> install_extension >> raise InstallError(f"Unrecognized type for {extension_path}") >> weecfg.extension.InstallError: Unrecognized type for >> weewx-wh23xx-master.zip >> 64GB@64GB:~/Downloads $ weectl station reconfigure >> Using configuration file /etc/weewx/weewx.conf >> Processing configuration file /etc/weewx/weewx.conf >> >> Give a description of the station. This will be used for the title of >> reports. >> description [2243 Matzen,Österreich Niederösterreich ]: >> >> Specify altitude, with units 'foot' or 'meter'. For example: >> 35, foot >> 12, meter >> altitude [199, meter]: >> >> Specify latitude in decimal degrees, negative for south. >> latitude [48.401826]: >> Specify longitude in decimal degrees, negative for west. >> longitude [16.686539]: >> >> Choose a unit system for the reports. Later, you can modify >> your choice, or choose a combination of units. Unit systems >> include: >> us (ºF, inHg, in, mph) >> metricwx (ºC, mbar, mm, m/s) >> metric (ºC, mbar, cm, km/h) >> unit system [metricwx]: >> >> Choose a driver. Installed drivers include: >> 0) ? (user.wh23xx) invalid syntax (wh23xx.py, >> line 427) >> 1) AcuRite (weewx.drivers.acurite) >> 2) CC3000 (weewx.drivers.cc3000) >> 3) FineOffsetUSB (weewx.drivers.fousb) >> 4) Simulator (weewx.drivers.simulator) >> 5) TE923 (weewx.drivers.te923) >> 6) Ultimeter (weewx.drivers.ultimeter) >> 7) Vantage (weewx.drivers.vantage) >> 8) WMR100 (weewx.drivers.wmr100) >> 9) WMR300 (weewx.drivers.wmr300) >> 10) WMR9x8 (weewx.drivers.wmr9x8) >> 11) WS1 (weewx.drivers.ws1) >> 12) WS23xx (weewx.drivers.ws23xx) >> 13) WS28xx (weewx.drivers.ws28xx) >> driver [4]: >> >> Tom Keffer schrieb am Sonntag, 31. März 2024 um 17:48:37 UTC+2: >> >> I did a quick port of the driver. It has *not* been tested! >> >> Find it here: https://github.com/tkeffer/weewx-wh23xx >> >> If it works for you, I'll ask Matthew to incorporate the changes. >> >> -tk >> >> On Sun, Mar 31, 2024 at 2:12 AM Tom Keffer <tke...@gmail.com> wrote: >> >> It appears that the wh23xx driver has not been ported to Python 2. >> >> On Sun, Mar 31, 2024 at 1:33 AM Günther Wrana <kawa...@gmail.com> wrote: >> >> Ladies and Gentlemen >> >> Once again I need your help, how is it possible to use the weather >> station I use with weewx version 5.0. >> I managed to install the new version of weewx and also the driver. It >> only shows an error message during reconfiguration. >> With this command I installed the driver >> weektl extension install weewx-wh23xx-master.zip >> >> >> What have I done wrong again? >> >> Thanks for the help and have a nice Easter holidays! >> >> [image: Bildschirmfoto von 2024-03-31 10-27-33.png] >> >> Sehr geehrte Damen und Herren >> >> Wieder einmal brauche ich eure Hilfe, wie ist es möglich die von mir >> verwendete Wetterstation mit weewx Version 5.0 zu verwenden. >> Ich habe es geschaft die neue Version von weewx zu installieren und auch >> den Treiber. Nur bei der Rekonfiguration zeigt es eine Fehlermeldung an. >> >> Mit diesem Befehl habe ich den Treiber installiert. >> weectl extension install weewx-wh23xx-master.zip >> >> Was habe ich wieder einmal falsch gemacht. >> >> Danke für die Hilfe und noch schöne Osterfeiertage! >> >> Holger DL7HMX schrieb am Freitag, 29. Januar 2021 um 18:00:12 UTC+1: >> >> OK, I set "windchill" and "heatindex" in weewx.conf to "software" >> (default was "hardware"). Now I've got values in weewx's output. >> >> Cheers, >> Holger >> >> Holger DL7HMX schrieb am Montag, 25. Januar 2021 um 23:33:24 UTC+1: >> >> Thank you, Gary. I wasn't aware of that. And indeed, the log during >> startup says that weewx uses python 3.7, although I wasn't aware of >> installing it. I just flashed the whole OS from an image "as is" and never >> updated python. At least that's what I thought. >> >> So, what does that mean now? I'm confused... >> >> Grateful for any clues. >> Holger >> >> The relevant bit from the log: >> >> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Initializing >> weewx version 4.3.0 >> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Using Python >> 3.7.3 (default, Jul 25 2020, 13:03:44) #012[GCC 8.3.0] >> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Platform >> Linux-5.4.79-v7+-armv7l-with-debian-10.7 >> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Locale is >> 'de_DE.UTF-8' >> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Using >> configuration file /etc/weewx/weewx.conf >> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Debug is 1 >> Jan 25 23:00:10 raspberrypi weewx[23489] INFO weewx.engine: Loading >> station type WH23xx (user.wh23xx) >> Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: driver version is 0.14 >> Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: usb info: pyusb_version=1.0.2 >> Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: poll interval is 15 >> Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: Found device on USB bus= >> device= >> Jan 25 23:00:10 raspberrypi kernel: [179275.088804] usb 1-1.4: reset >> full-speed USB device number 5 using dwc_otg >> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: StdConvert >> target unit is 0x1 >> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Archive will >> use data binding wx_binding >> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Record >> generation will be attempted in 'software' >> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Using archive >> interval of 30 seconds (software record generation) >> Jan 25 23:00:11 raspberrypi weewx[23489] WARNING weewx.engine: Archive >> delay (15) is unusually long >> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: >> StationRegistry: Registration not requested. >> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: Wunderground: >> Posting not enabled. >> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: PWSweather: >> Posting not enabled. >> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: CWOP: Posting >> not enabled. >> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: WOW: Posting >> not enabled. >> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: AWEKAS: >> Posting not enabled. >> Jan 25 23:00:11 raspberrypi weewx[23489] INFO __main__: Starting up weewx >> version 4.3.0 >> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Using binding >> 'wx_binding' to database 'weewx.sdb' >> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.manager: Starting >> backfill of daily summaries >> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Starting main >> packet loop. >> Jan 25 23:00:42 raspberrypi weewx[23489] INFO weewx.engine: Main loop >> exiting. Shutting engine down. >> >> gjr80 schrieb am Sonntag, 24. Januar 2021 um 23:22:38 UTC+1: >> >> On Monday, 25 January 2021 at 07:19:16 UTC+10 Holger DL7HMX wrote: >> >> Hi all, >> >> I've been following your discussion with interest and I've just set up my >> own station: >> >> - WH2315 (Renkforce >> >> <https://www.conrad.de/de/p/renkforce-rf-4406812-funk-wetterstation-vorhersage-fuer-12-bis-24-stunden-2203406.html> >> >> from Conrad) >> - Raspberry Pi 3B >> - weewx 4.3.0 >> - driver is wh23xx (I think it's the one that has Edwin's and >> Bogdan's fixes, as it says in the file's preamble "Updated to Python 3 >> support, tested with Renkforce 2315") >> - Python 2.7.16 (according to python -V) >> >> >> Just one point of clarification, python -V will display the python >> version used when the python is invoked from the command line, that is not >> necessarily the version of python used by WeeWX. To find the version of >> python used by WeeWX you need to look at the WeeWX log during startup, it >> will list the python version being used by WeeWX. >> >> Gary >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/e9c1c148-9dfa-4c33-a698-8344376997f0n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/e9c1c148-9dfa-4c33-a698-8344376997f0n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/13a9d7c5-0b03-4f78-815e-f2ac71569729n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/13a9d7c5-0b03-4f78-815e-f2ac71569729n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/d66db270-1e09-4807-b490-9f9d543491b0n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/d66db270-1e09-4807-b490-9f9d543491b0n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> >> -- >> >> You received this message because you are subscribed to a topic in the >> Google Groups "weewx-user" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/weewx-user/zsTwFI7tSlw/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> weewx-user+...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/74ca9e36-1154-4575-a57e-555f667c9c08n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/74ca9e36-1154-4575-a57e-555f667c9c08n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/0fe26cdb-e0bc-47be-afb5-46bf794f6d7en%40googlegroups.com.
