Hi, I can't even reconfigure the program with this weectl station
reconfigure command.
So I don't need to try to install other drivers yet.
The driver I would need cannot be installed.
But thanks for the information.
Hallo ich kann das Programm mit diesem Befehl weectl station reconfigure
nicht einmal neu konfigurieren.
Also brauche ich auch noch nicht versuchen andere Treiber zu installieren.
Den Treiber den ich brauchen würde lässt sich nicht installieren.
Aber danke für die Informationen.
Kalli schrieb am Samstag, 24. August 2024 um 17:57:10 UTC+2:
Hello, I have copied the driver data into the intended directories, try
that. Unfortunately I don't remember what they were, but I'll take a look.
Hallo ich habe die Treiber daten in die dafür vorgesehenen Verzeichnisse
kopiert , versuche das mal. Ich weis leider nicht mehr welsche das waren,
aber ich schaue mal nach.
Am 24.08.2024 um 17:14 schrieb Günther Wrana <kawa...@gmail.com>:
Hello and again it's me, Günther Wrana from Austria, who can't install the
driver for the Renkforce Wh2315.
Does it no longer work the driver or what have I once again not installed
correctly.
As you can see below, I installed weewx on my Raspberry and chose the
simulation driver.
I then tried to choose a new driver with the weectl station reconfigure
command.
Even before I tried to install the driver for my Renkforce Wh2315.
Not even that worked, so what's wrong and what's the problem?
Thanks for the help Günther
Hallo und wieder bin es ich Günther Wrana aus Österreich der den Treiber
für die Renkforce Wh2315 nicht installieren kann.
Funktioniert es nun nicht mehr der Treiber oder was habe ich nun wieder
einmal nicht richtig installiert.
Wie Ihr unten sehen könnt habe ich weewx auf meinem Raspberry installiert
und den Simulation Treiber gewählt.
Ich habe danach mit dem Befehl weectl station reconfigure versucht einen
neuen Treiber zu wählen.
Noch bevor ich den Treiber für meine Renkforce Wh2315 zu installieren
versuch habe.
Nicht einmal das hat funktioniert also was ist falsch und wo liegt das
Problem?
Danke für die Hilfe Günther
32GB@32GB:~/Downloads $ sudo systemctl start weewx
32GB@32GB:~/Downloads $ sudo systemctl status weewx
● weewx.service - WeeWX
Loaded: loaded (/lib/systemd/system/weewx.service; enabled; preset:
enabled)
Active: active (running) since Sat 2024-08-24 16:58:57 CEST; 2s ago
Docs: https://weewx.com/docs
Main PID: 4631 (python3)
Tasks: 1 (limit: 755)
CPU: 784ms
CGroup: /system.slice/weewx.service
└─4631 python3 /usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.restx: CWOP: Posting not
enabled.
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.restx: WOW: Posting not
enabled.
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.restx: AWEKAS: Posting not
enabled.
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: 'pyephem' detected,
extended almanac data is available
Aug 24 16:58:58 32GB weewxd[4631]: INFO __main__: Starting up weewx version
5.1.0
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: Clock error is -0.26
seconds (positive is fast)
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: Using binding
'wx_binding' to database 'weewx.sdb'
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.manager: Starting backfill of
daily summaries
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.manager: Daily summaries up
to date
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: Starting main packet
loop.
32GB@32GB:~/Downloads $ weectl station reconfigure
Error parsing config file: [Errno 13] Permission denied:
'/etc/weewx/weewx.conf'
Traceback (most recent call last):
File "/usr/share/weewx/weeutil/startup.py", line 86, in start_app
config_path, config_dict = weecfg.read_config(config_option,
[config_arg])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/share/weewx/weecfg/__init__.py", line 150, in read_config
config_dict = configobj.ConfigObj(config_path,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/configobj/__init__.py", line 1229,
in __init__
self._load(infile, configspec)
File "/usr/lib/python3/dist-packages/configobj/__init__.py", line 1236,
in _load
with open(infile, 'rb') as h:
^^^^^^^^^^^^^^^^^^
PermissionError: [Errno 13] Permission denied: '/etc/weewx/weewx.conf'
32GB@32GB:~/Downloads $
Tom Keffer schrieb am Samstag, 6. April 2024 um 14:46:09 UTC+2:
I was just going to point that out!
With V5, it's actually easiest to install directly from the URL:
*weectl extension
install https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
<https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip>*
On Fri, Apr 5, 2024 at 10:53 PM Günther Wrana <kawa...@gmail.com> wrote:
Hello, I think I have solved the problem.
The driver from the following link wget -O weewx-wh23xx.zip
https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
works, at least there is no error message when reconfiguring the weather
cities.
Thanks for the help and I'll definitely need something from YOU again soon.
Another nice day from Austria
Hallo ich glaube ich habe das Problem gelöst.
Der Treiber von folgendem Link wget -O weewx-wh23xx.zip
https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
funktioniert zumindest kommt keine Fehlermeldung bei der Rekonfiguration
der Wetterstadtionen.
Danke für die Hilfe und ich brauche sicher bald wieder etwas von EUCH.
Noch einen schönen Tag aus Österreich
64GB@64GB:~/Downloads $ rm weewx-wh23xx.zip
64GB@64GB:~/Downloads $ wget -O weewx-wh23xx.zip
https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
--2024-04-06 07:40:19--
https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
Resolving github.com (github.com)... 140.82.121.4
Connecting to github.com (github.com)|140.82.121.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location:
https://codeload.github.com/EdwinGH/weewx-wh23xx/zip/refs/heads/master
[following]
--2024-04-06 07:40:20--
https://codeload.github.com/EdwinGH/weewx-wh23xx/zip/refs/heads/master
Resolving codeload.github.com (codeload.github.com)... 140.82.121.10
Connecting to codeload.github.com (codeload.github.com)|140.82.121.10|:443...
connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/zip]
Saving to: ‘weewx-wh23xx.zip’
weewx-wh23xx.zip [ <=> ] 24.88K --.-KB/s in
0.03s
2024-04-06 07:40:20 (739 KB/s) - ‘weewx-wh23xx.zip’ saved [25472]
64GB@64GB:~/Downloads $ dir
weewx-wh23xx.zip
64GB@64GB:~/Downloads $ weectl extension install weewx-wh23xx.zip
Using configuration file /etc/weewx/weewx.conf
Install extension 'weewx-wh23xx.zip' (y/n)? y
Extracting from zip archive weewx-wh23xx.zip
Saving installer file to /etc/weewx/bin/user/installer/wh23xx
Finished installing extension wh23xx from weewx-wh23xx.zip
64GB@64GB:~/Downloads $ weectl station reconfigure
Using configuration file /etc/weewx/weewx.conf
Processing configuration file /etc/weewx/weewx.conf
Give a description of the station. This will be used for the title of
reports.
description [2243 Matzen,Österreich Niederösterreich ]:
Specify altitude, with units 'foot' or 'meter'. For example:
35, foot
12, meter
altitude [199, meter]:
Specify latitude in decimal degrees, negative for south.
latitude [48.401826]:
Specify longitude in decimal degrees, negative for west.
longitude [16.686539]:
Choose a unit system for the reports. Later, you can modify
your choice, or choose a combination of units. Unit systems
include:
us (ºF, inHg, in, mph)
metricwx (ºC, mbar, mm, m/s)
metric (ºC, mbar, cm, km/h)
unit system [metricwx]:
Choose a driver. Installed drivers include:
0) WH23xx (user.wh23xx)
1) AcuRite (weewx.drivers.acurite)
2) CC3000 (weewx.drivers.cc3000)
3) FineOffsetUSB (weewx.drivers.fousb)
4) Simulator (weewx.drivers.simulator)
5) TE923 (weewx.drivers.te923)
6) Ultimeter (weewx.drivers.ultimeter)
7) Vantage (weewx.drivers.vantage)
8) WMR100 (weewx.drivers.wmr100)
9) WMR300 (weewx.drivers.wmr300)
10) WMR9x8 (weewx.drivers.wmr9x8)
11) WS1 (weewx.drivers.ws1)
12) WS23xx (weewx.drivers.ws23xx)
13) WS28xx (weewx.drivers.ws28xx)
driver [4]: 0
You can register the station on weewx.com, where it will be included in a
map. If you choose to register, you will also need a unique URL to identify
the station (such as a website, or a WeatherUnderground link).
register this station (y/n)? [y] y
Now give a unique URL for the station. A Weather Underground
URL such as https://www.wunderground.com/dashboard/pws/KORPORT12 will do.
Unique URL [http://guentherwrana.ddns.net]:
Saving configuration file /etc/weewx/weewx.conf
Saved old configuration file as /etc/weewx/weewx.conf.20240406074122
64GB@64GB:~/Downloads $ weectl --version
weectl 5.0.2
64GB@64GB:~/Downloads $
Tom Keffer schrieb am Donnerstag, 4. April 2024 um 18:27:45 UTC+2:
Günther?
On Mon, Apr 1, 2024 at 9:19 AM Tom Keffer <tke...@gmail.com> wrote:
Two things:
1. You are still using the original version of the driver. You want my
patched version at https://github.com/tkeffer/weewx-wh23xx
2. What version of weewx are you using? Early beta versions of v5.0 could
not recognize a zip file, but current releases do.
* weectl --version*
On Mon, Apr 1, 2024 at 8:48 AM Günther Wrana <kawa...@gmail.com> wrote:
Hello, this is the message when I install the driver and try to select when
reconfiguring
Thanks Günther
Hallo das ist die Meldung wenn ich den Treiber installiere und versuche bei
der Rekonfiguration auszuwählen
Danke Günther
64GB@64GB:~/Downloads $ wget -O weewx-wh23xx.zip
https://github.com/matthewwall/weewx-wh23xx/archive/master.zip
--2024-04-01 17:27:53--
https://github.com/matthewwall/weewx-wh23xx/archive/master.zip
Resolving github.com (github.com)... 140.82.121.3
Connecting to github.com (github.com)|140.82.121.3|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location:
https://codeload.github.com/matthewwall/weewx-wh23xx/zip/refs/heads/master
[following]
--2024-04-01 17:27:53--
https://codeload.github.com/matthewwall/weewx-wh23xx/zip/refs/heads/master
Resolving codeload.github.com (codeload.github.com)... 140.82.121.9
Connecting to codeload.github.com (codeload.github.com)|140.82.121.9|:443...
connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/zip]
Saving to: ‘weewx-wh23xx.zip’
weewx-wh23xx.zip [ <=> ] 23.64K --.-KB/s in
0.03s
2024-04-01 17:27:54 (837 KB/s) - ‘weewx-wh23xx.zip’ saved [24210]
64GB@64GB:~/Downloads $ weectl extension install weewx-wh23xx-master.zip
Using configuration file /etc/weewx/weewx.conf
Install extension 'weewx-wh23xx-master.zip' (y/n)? y
Traceback (most recent call last):
File "/usr/share/weewx/weectl.py", line 74, in <module>
main()
File "/usr/share/weewx/weectl.py", line 66, in main
namespace.func(namespace)
File "/usr/share/weewx/weectllib/__init__.py", line 121, in dispatch
namespace.action_func(config_dict, namespace)
File "/usr/share/weewx/weectllib/extension_cmd.py", line 116, in
install_extension
ext.install_extension(namespace.source, no_confirm=namespace.yes)
File "/usr/share/weewx/weecfg/extension.py", line 143, in
install_extension
raise InstallError(f"Unrecognized type for {extension_path}")
weecfg.extension.InstallError: Unrecognized type for weewx-wh23xx-master.zip
64GB@64GB:~/Downloads $ weectl station reconfigure
Using configuration file /etc/weewx/weewx.conf
Processing configuration file /etc/weewx/weewx.conf
Give a description of the station. This will be used for the title of
reports.
description [2243 Matzen,Österreich Niederösterreich ]:
Specify altitude, with units 'foot' or 'meter'. For example:
35, foot
12, meter
altitude [199, meter]:
Specify latitude in decimal degrees, negative for south.
latitude [48.401826]:
Specify longitude in decimal degrees, negative for west.
longitude [16.686539]:
Choose a unit system for the reports. Later, you can modify
your choice, or choose a combination of units. Unit systems
include:
us (ºF, inHg, in, mph)
metricwx (ºC, mbar, mm, m/s)
metric (ºC, mbar, cm, km/h)
unit system [metricwx]:
Choose a driver. Installed drivers include:
0) ? (user.wh23xx) invalid syntax (wh23xx.py,
line 427)
1) AcuRite (weewx.drivers.acurite)
2) CC3000 (weewx.drivers.cc3000)
3) FineOffsetUSB (weewx.drivers.fousb)
4) Simulator (weewx.drivers.simulator)
5) TE923 (weewx.drivers.te923)
6) Ultimeter (weewx.drivers.ultimeter)
7) Vantage (weewx.drivers.vantage)
8) WMR100 (weewx.drivers.wmr100)
9) WMR300 (weewx.drivers.wmr300)
10) WMR9x8 (weewx.drivers.wmr9x8)
11) WS1 (weewx.drivers.ws1)
12) WS23xx (weewx.drivers.ws23xx)
13) WS28xx (weewx.drivers.ws28xx)
driver [4]:
Tom Keffer schrieb am Sonntag, 31. März 2024 um 17:48:37 UTC+2:
I did a quick port of the driver. It has *not* been tested!
Find it here: https://github.com/tkeffer/weewx-wh23xx
If it works for you, I'll ask Matthew to incorporate the changes.
-tk
On Sun, Mar 31, 2024 at 2:12 AM Tom Keffer <tke...@gmail.com> wrote:
It appears that the wh23xx driver has not been ported to Python 2.
On Sun, Mar 31, 2024 at 1:33 AM Günther Wrana <kawa...@gmail.com> wrote:
Ladies and Gentlemen
Once again I need your help, how is it possible to use the weather station
I use with weewx version 5.0.
I managed to install the new version of weewx and also the driver. It only
shows an error message during reconfiguration.
With this command I installed the driver
weektl extension install weewx-wh23xx-master.zip
What have I done wrong again?
Thanks for the help and have a nice Easter holidays!
[image: Bildschirmfoto von 2024-03-31 10-27-33.png]
Sehr geehrte Damen und Herren
Wieder einmal brauche ich eure Hilfe, wie ist es möglich die von mir
verwendete Wetterstation mit weewx Version 5.0 zu verwenden.
Ich habe es geschaft die neue Version von weewx zu installieren und auch
den Treiber. Nur bei der Rekonfiguration zeigt es eine Fehlermeldung an.
Mit diesem Befehl habe ich den Treiber installiert.
weectl extension install weewx-wh23xx-master.zip
Was habe ich wieder einmal falsch gemacht.
Danke für die Hilfe und noch schöne Osterfeiertage!
Holger DL7HMX schrieb am Freitag, 29. Januar 2021 um 18:00:12 UTC+1:
OK, I set "windchill" and "heatindex" in weewx.conf to "software" (default
was "hardware"). Now I've got values in weewx's output.
Cheers,
Holger
Holger DL7HMX schrieb am Montag, 25. Januar 2021 um 23:33:24 UTC+1:
Thank you, Gary. I wasn't aware of that. And indeed, the log during startup
says that weewx uses python 3.7, although I wasn't aware of installing it.
I just flashed the whole OS from an image "as is" and never updated python.
At least that's what I thought.
So, what does that mean now? I'm confused...
Grateful for any clues.
Holger
The relevant bit from the log:
Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Initializing weewx
version 4.3.0
Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Using Python 3.7.3
(default, Jul 25 2020, 13:03:44) #012[GCC 8.3.0]
Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Platform
Linux-5.4.79-v7+-armv7l-with-debian-10.7
Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Locale is
'de_DE.UTF-8'
Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Using configuration
file /etc/weewx/weewx.conf
Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Debug is 1
Jan 25 23:00:10 raspberrypi weewx[23489] INFO weewx.engine: Loading station
type WH23xx (user.wh23xx)
Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: driver version is 0.14
Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: usb info: pyusb_version=1.0.2
Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: poll interval is 15
Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: Found device on USB bus=
device=
Jan 25 23:00:10 raspberrypi kernel: [179275.088804] usb 1-1.4: reset
full-speed USB device number 5 using dwc_otg
Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: StdConvert
target unit is 0x1
Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Archive will
use data binding wx_binding
Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Record
generation will be attempted in 'software'
Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Using archive
interval of 30 seconds (software record generation)
Jan 25 23:00:11 raspberrypi weewx[23489] WARNING weewx.engine: Archive
delay (15) is unusually long
Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: StationRegistry:
Registration not requested.
Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: Wunderground:
Posting not enabled.
Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: PWSweather:
Posting not enabled.
Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: CWOP: Posting
not enabled.
Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: WOW: Posting not
enabled.
Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: AWEKAS: Posting
not enabled.
Jan 25 23:00:11 raspberrypi weewx[23489] INFO __main__: Starting up weewx
version 4.3.0
Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Using binding
'wx_binding' to database 'weewx.sdb'
Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.manager: Starting
backfill of daily summaries
Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Starting main
packet loop.
Jan 25 23:00:42 raspberrypi weewx[23489] INFO weewx.engine: Main loop
exiting. Shutting engine down.
gjr80 schrieb am Sonntag, 24. Januar 2021 um 23:22:38 UTC+1:
On Monday, 25 January 2021 at 07:19:16 UTC+10 Holger DL7HMX wrote:
Hi all,
I've been following your discussion with interest and I've just set up my
own station:
- WH2315 (Renkforce
<https://www.conrad.de/de/p/renkforce-rf-4406812-funk-wetterstation-vorhersage-fuer-12-bis-24-stunden-2203406.html>
from Conrad)
- Raspberry Pi 3B
- weewx 4.3.0
- driver is wh23xx (I think it's the one that has Edwin's and Bogdan's
fixes, as it says in the file's preamble "Updated to Python 3 support,
tested with Renkforce 2315")
- Python 2.7.16 (according to python -V)
Just one point of clarification, python -V will display the python version
used when the python is invoked from the command line, that is not
necessarily the version of python used by WeeWX. To find the version of
python used by WeeWX you need to look at the WeeWX log during startup, it
will list the python version being used by WeeWX.
Gary
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to weewx-user+...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/e9c1c148-9dfa-4c33-a698-8344376997f0n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/e9c1c148-9dfa-4c33-a698-8344376997f0n%40googlegroups.com?utm_medium=email&utm_source=footer>
.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to weewx-user+...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/13a9d7c5-0b03-4f78-815e-f2ac71569729n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/13a9d7c5-0b03-4f78-815e-f2ac71569729n%40googlegroups.com?utm_medium=email&utm_source=footer>
.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to weewx-user+...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/d66db270-1e09-4807-b490-9f9d543491b0n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/d66db270-1e09-4807-b490-9f9d543491b0n%40googlegroups.com?utm_medium=email&utm_source=footer>
.
--
You received this message because you are subscribed to a topic in the
Google Groups "weewx-user" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/weewx-user/zsTwFI7tSlw/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
weewx-user+...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/74ca9e36-1154-4575-a57e-555f667c9c08n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/74ca9e36-1154-4575-a57e-555f667c9c08n%40googlegroups.com?utm_medium=email&utm_source=footer>
.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/91605d1c-7766-4361-aea5-7c451b93a30bn%40googlegroups.com.
