Hi Guenther, to be this looks more like an access control problem ("
Permission denied: '/etc/weewx/weewx.conf"). As since recently WeeWX moved
from root to the weewx user, I guess this may be your problem.
Please
read
https://github.com/weewx/weewx/wiki/WeeWX-Frequently-Asked-Questions#why-do-i-get-permission-denied
and https://weewx.com/docs/5.1/upgrade/#weewx-runs-as-the-weewx-user
For me all the files in /etc/weewx are owned by the weewx user and group.
Hope this helps!
Edwin
On Sunday, August 25, 2024 at 10:27:51 AM UTC+2 Günther Wrana wrote:
> Hi, I can't even reconfigure the program with this weectl station
> reconfigure command.
> So I don't need to try to install other drivers yet.
> The driver I would need cannot be installed.
> But thanks for the information.
>
>
> Hallo ich kann das Programm mit diesem Befehl weectl station reconfigure
> nicht einmal neu konfigurieren.
> Also brauche ich auch noch nicht versuchen andere Treiber zu installieren.
> Den Treiber den ich brauchen würde lässt sich nicht installieren.
> Aber danke für die Informationen.
>
>
>
> Kalli schrieb am Samstag, 24. August 2024 um 17:57:10 UTC+2:
>
> Hello, I have copied the driver data into the intended directories, try
> that. Unfortunately I don't remember what they were, but I'll take a look.
> Hallo ich habe die Treiber daten in die dafür vorgesehenen Verzeichnisse
> kopiert , versuche das mal. Ich weis leider nicht mehr welsche das waren,
> aber ich schaue mal nach.
>
> Am 24.08.2024 um 17:14 schrieb Günther Wrana <kawa...@gmail.com>:
>
> Hello and again it's me, Günther Wrana from Austria, who can't install the
> driver for the Renkforce Wh2315.
> Does it no longer work the driver or what have I once again not installed
> correctly.
>
> As you can see below, I installed weewx on my Raspberry and chose the
> simulation driver.
> I then tried to choose a new driver with the weectl station reconfigure
> command.
>
> Even before I tried to install the driver for my Renkforce Wh2315.
> Not even that worked, so what's wrong and what's the problem?
>
> Thanks for the help Günther
>
>
> Hallo und wieder bin es ich Günther Wrana aus Österreich der den Treiber
> für die Renkforce Wh2315 nicht installieren kann.
> Funktioniert es nun nicht mehr der Treiber oder was habe ich nun wieder
> einmal nicht richtig installiert.
>
> Wie Ihr unten sehen könnt habe ich weewx auf meinem Raspberry installiert
> und den Simulation Treiber gewählt.
> Ich habe danach mit dem Befehl weectl station reconfigure versucht einen
> neuen Treiber zu wählen.
>
> Noch bevor ich den Treiber für meine Renkforce Wh2315 zu installieren
> versuch habe.
> Nicht einmal das hat funktioniert also was ist falsch und wo liegt das
> Problem?
>
> Danke für die Hilfe Günther
>
>
> 32GB@32GB:~/Downloads $ sudo systemctl start weewx
> 32GB@32GB:~/Downloads $ sudo systemctl status weewx
> ● weewx.service - WeeWX
> Loaded: loaded (/lib/systemd/system/weewx.service; enabled; preset:
> enabled)
> Active: active (running) since Sat 2024-08-24 16:58:57 CEST; 2s ago
> Docs: https://weewx.com/docs
> Main PID: 4631 (python3)
> Tasks: 1 (limit: 755)
> CPU: 784ms
> CGroup: /system.slice/weewx.service
> └─4631 python3 /usr/share/weewx/weewxd.py
> /etc/weewx/weewx.conf
>
> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.restx: CWOP: Posting not
> enabled.
> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.restx: WOW: Posting not
> enabled.
> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.restx: AWEKAS: Posting not
> enabled.
> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: 'pyephem' detected,
> extended almanac data is available
> Aug 24 16:58:58 32GB weewxd[4631]: INFO __main__: Starting up weewx
> version 5.1.0
> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: Clock error is -0.26
> seconds (positive is fast)
> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: Using binding
> 'wx_binding' to database 'weewx.sdb'
> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.manager: Starting backfill
> of daily summaries
> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.manager: Daily summaries up
> to date
> Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: Starting main packet
> loop.
>
>
> 32GB@32GB:~/Downloads $ weectl station reconfigure
> Error parsing config file: [Errno 13] Permission denied:
> '/etc/weewx/weewx.conf'
> Traceback (most recent call last):
> File "/usr/share/weewx/weeutil/startup.py", line 86, in start_app
> config_path, config_dict = weecfg.read_config(config_option,
> [config_arg])
>
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> File "/usr/share/weewx/weecfg/__init__.py", line 150, in read_config
> config_dict = configobj.ConfigObj(config_path,
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> File "/usr/lib/python3/dist-packages/configobj/__init__.py", line 1229,
> in __init__
> self._load(infile, configspec)
> File "/usr/lib/python3/dist-packages/configobj/__init__.py", line 1236,
> in _load
> with open(infile, 'rb') as h:
> ^^^^^^^^^^^^^^^^^^
> PermissionError: [Errno 13] Permission denied: '/etc/weewx/weewx.conf'
> 32GB@32GB:~/Downloads $
>
> Tom Keffer schrieb am Samstag, 6. April 2024 um 14:46:09 UTC+2:
>
> I was just going to point that out!
>
> With V5, it's actually easiest to install directly from the URL:
>
> *weectl extension
> install https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
> <https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip>*
>
>
>
> On Fri, Apr 5, 2024 at 10:53 PM Günther Wrana <kawa...@gmail.com> wrote:
>
> Hello, I think I have solved the problem.
> The driver from the following link wget -O weewx-wh23xx.zip
> https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
> works, at least there is no error message when reconfiguring the weather
> cities.
>
> Thanks for the help and I'll definitely need something from YOU again soon.
> Another nice day from Austria
>
>
> Hallo ich glaube ich habe das Problem gelöst.
> Der Treiber von folgendem Link wget -O weewx-wh23xx.zip
> https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
> funktioniert zumindest kommt keine Fehlermeldung bei der Rekonfiguration
> der Wetterstadtionen.
>
> Danke für die Hilfe und ich brauche sicher bald wieder etwas von EUCH.
> Noch einen schönen Tag aus Österreich
>
>
>
> 64GB@64GB:~/Downloads $ rm weewx-wh23xx.zip
> 64GB@64GB:~/Downloads $ wget -O weewx-wh23xx.zip
> https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
> --2024-04-06 07:40:19--
> https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
> Resolving github.com (github.com)... 140.82.121.4
> Connecting to github.com (github.com)|140.82.121.4|:443... connected.
> HTTP request sent, awaiting response... 302 Found
> Location:
> https://codeload.github.com/EdwinGH/weewx-wh23xx/zip/refs/heads/master
> [following]
> --2024-04-06 07:40:20--
> https://codeload.github.com/EdwinGH/weewx-wh23xx/zip/refs/heads/master
> Resolving codeload.github.com (codeload.github.com)... 140.82.121.10
> Connecting to codeload.github.com (codeload.github.com)|140.82.121.10|:443...
> connected.
> HTTP request sent, awaiting response... 200 OK
> Length: unspecified [application/zip]
> Saving to: ‘weewx-wh23xx.zip’
>
> weewx-wh23xx.zip [ <=> ] 24.88K --.-KB/s in
> 0.03s
>
> 2024-04-06 07:40:20 (739 KB/s) - ‘weewx-wh23xx.zip’ saved [25472]
>
> 64GB@64GB:~/Downloads $ dir
> weewx-wh23xx.zip
> 64GB@64GB:~/Downloads $ weectl extension install weewx-wh23xx.zip
> Using configuration file /etc/weewx/weewx.conf
> Install extension 'weewx-wh23xx.zip' (y/n)? y
> Extracting from zip archive weewx-wh23xx.zip
> Saving installer file to /etc/weewx/bin/user/installer/wh23xx
> Finished installing extension wh23xx from weewx-wh23xx.zip
> 64GB@64GB:~/Downloads $ weectl station reconfigure
> Using configuration file /etc/weewx/weewx.conf
> Processing configuration file /etc/weewx/weewx.conf
>
> Give a description of the station. This will be used for the title of
> reports.
> description [2243 Matzen,Österreich Niederösterreich ]:
>
> Specify altitude, with units 'foot' or 'meter'. For example:
> 35, foot
> 12, meter
> altitude [199, meter]:
>
> Specify latitude in decimal degrees, negative for south.
> latitude [48.401826]:
> Specify longitude in decimal degrees, negative for west.
> longitude [16.686539]:
>
> Choose a unit system for the reports. Later, you can modify
> your choice, or choose a combination of units. Unit systems
> include:
> us (ºF, inHg, in, mph)
> metricwx (ºC, mbar, mm, m/s)
> metric (ºC, mbar, cm, km/h)
> unit system [metricwx]:
>
> Choose a driver. Installed drivers include:
> 0) WH23xx (user.wh23xx)
> 1) AcuRite (weewx.drivers.acurite)
> 2) CC3000 (weewx.drivers.cc3000)
> 3) FineOffsetUSB (weewx.drivers.fousb)
> 4) Simulator (weewx.drivers.simulator)
> 5) TE923 (weewx.drivers.te923)
> 6) Ultimeter (weewx.drivers.ultimeter)
> 7) Vantage (weewx.drivers.vantage)
> 8) WMR100 (weewx.drivers.wmr100)
> 9) WMR300 (weewx.drivers.wmr300)
> 10) WMR9x8 (weewx.drivers.wmr9x8)
> 11) WS1 (weewx.drivers.ws1)
> 12) WS23xx (weewx.drivers.ws23xx)
> 13) WS28xx (weewx.drivers.ws28xx)
> driver [4]: 0
>
> You can register the station on weewx.com, where it will be included in a
> map. If you choose to register, you will also need a unique URL to
> identify
> the station (such as a website, or a WeatherUnderground link).
> register this station (y/n)? [y] y
>
> Now give a unique URL for the station. A Weather Underground
> URL such as https://www.wunderground.com/dashboard/pws/KORPORT12 will do.
> Unique URL [http://guentherwrana.ddns.net]:
> Saving configuration file /etc/weewx/weewx.conf
> Saved old configuration file as /etc/weewx/weewx.conf.20240406074122
> 64GB@64GB:~/Downloads $ weectl --version
> weectl 5.0.2
> 64GB@64GB:~/Downloads $
>
>
> Tom Keffer schrieb am Donnerstag, 4. April 2024 um 18:27:45 UTC+2:
>
> Günther?
>
> On Mon, Apr 1, 2024 at 9:19 AM Tom Keffer <tke...@gmail.com> wrote:
>
> Two things:
>
> 1. You are still using the original version of the driver. You want my
> patched version at https://github.com/tkeffer/weewx-wh23xx
> 2. What version of weewx are you using? Early beta versions of v5.0 could
> not recognize a zip file, but current releases do.
>
> * weectl --version*
>
>
> On Mon, Apr 1, 2024 at 8:48 AM Günther Wrana <kawa...@gmail.com> wrote:
>
> Hello, this is the message when I install the driver and try to select
> when reconfiguring
>
> Thanks Günther
>
> Hallo das ist die Meldung wenn ich den Treiber installiere und versuche
> bei der Rekonfiguration auszuwählen
>
> Danke Günther
>
>
>
> 64GB@64GB:~/Downloads $ wget -O weewx-wh23xx.zip
> https://github.com/matthewwall/weewx-wh23xx/archive/master.zip
> --2024-04-01 17:27:53--
> https://github.com/matthewwall/weewx-wh23xx/archive/master.zip
> Resolving github.com (github.com)... 140.82.121.3
> Connecting to github.com (github.com)|140.82.121.3|:443... connected.
> HTTP request sent, awaiting response... 302 Found
> Location:
> https://codeload.github.com/matthewwall/weewx-wh23xx/zip/refs/heads/master
> [following]
> --2024-04-01 17:27:53--
> https://codeload.github.com/matthewwall/weewx-wh23xx/zip/refs/heads/master
> Resolving codeload.github.com (codeload.github.com)... 140.82.121.9
> Connecting to codeload.github.com (codeload.github.com)|140.82.121.9|:443...
> connected.
> HTTP request sent, awaiting response... 200 OK
> Length: unspecified [application/zip]
> Saving to: ‘weewx-wh23xx.zip’
>
> weewx-wh23xx.zip [ <=> ] 23.64K --.-KB/s in
> 0.03s
>
> 2024-04-01 17:27:54 (837 KB/s) - ‘weewx-wh23xx.zip’ saved [24210]
>
> 64GB@64GB:~/Downloads $ weectl extension install weewx-wh23xx-master.zip
> Using configuration file /etc/weewx/weewx.conf
> Install extension 'weewx-wh23xx-master.zip' (y/n)? y
> Traceback (most recent call last):
> File "/usr/share/weewx/weectl.py", line 74, in <module>
> main()
> File "/usr/share/weewx/weectl.py", line 66, in main
> namespace.func(namespace)
> File "/usr/share/weewx/weectllib/__init__.py", line 121, in dispatch
> namespace.action_func(config_dict, namespace)
> File "/usr/share/weewx/weectllib/extension_cmd.py", line 116, in
> install_extension
> ext.install_extension(namespace.source, no_confirm=namespace.yes)
> File "/usr/share/weewx/weecfg/extension.py", line 143, in
> install_extension
> raise InstallError(f"Unrecognized type for {extension_path}")
> weecfg.extension.InstallError: Unrecognized type for
> weewx-wh23xx-master.zip
> 64GB@64GB:~/Downloads $ weectl station reconfigure
> Using configuration file /etc/weewx/weewx.conf
> Processing configuration file /etc/weewx/weewx.conf
>
> Give a description of the station. This will be used for the title of
> reports.
> description [2243 Matzen,Österreich Niederösterreich ]:
>
> Specify altitude, with units 'foot' or 'meter'. For example:
> 35, foot
> 12, meter
> altitude [199, meter]:
>
> Specify latitude in decimal degrees, negative for south.
> latitude [48.401826]:
> Specify longitude in decimal degrees, negative for west.
> longitude [16.686539]:
>
> Choose a unit system for the reports. Later, you can modify
> your choice, or choose a combination of units. Unit systems
> include:
> us (ºF, inHg, in, mph)
> metricwx (ºC, mbar, mm, m/s)
> metric (ºC, mbar, cm, km/h)
> unit system [metricwx]:
>
> Choose a driver. Installed drivers include:
> 0) ? (user.wh23xx) invalid syntax (wh23xx.py,
> line 427)
> 1) AcuRite (weewx.drivers.acurite)
> 2) CC3000 (weewx.drivers.cc3000)
> 3) FineOffsetUSB (weewx.drivers.fousb)
> 4) Simulator (weewx.drivers.simulator)
> 5) TE923 (weewx.drivers.te923)
> 6) Ultimeter (weewx.drivers.ultimeter)
> 7) Vantage (weewx.drivers.vantage)
> 8) WMR100 (weewx.drivers.wmr100)
> 9) WMR300 (weewx.drivers.wmr300)
> 10) WMR9x8 (weewx.drivers.wmr9x8)
> 11) WS1 (weewx.drivers.ws1)
> 12) WS23xx (weewx.drivers.ws23xx)
> 13) WS28xx (weewx.drivers.ws28xx)
> driver [4]:
>
> Tom Keffer schrieb am Sonntag, 31. März 2024 um 17:48:37 UTC+2:
>
> I did a quick port of the driver. It has *not* been tested!
>
> Find it here: https://github.com/tkeffer/weewx-wh23xx
>
> If it works for you, I'll ask Matthew to incorporate the changes.
>
> -tk
>
> On Sun, Mar 31, 2024 at 2:12 AM Tom Keffer <tke...@gmail.com> wrote:
>
> It appears that the wh23xx driver has not been ported to Python 2.
>
> On Sun, Mar 31, 2024 at 1:33 AM Günther Wrana <kawa...@gmail.com> wrote:
>
> Ladies and Gentlemen
>
> Once again I need your help, how is it possible to use the weather station
> I use with weewx version 5.0.
> I managed to install the new version of weewx and also the driver. It only
> shows an error message during reconfiguration.
> With this command I installed the driver
> weektl extension install weewx-wh23xx-master.zip
>
>
> What have I done wrong again?
>
> Thanks for the help and have a nice Easter holidays!
>
> [image: Bildschirmfoto von 2024-03-31 10-27-33.png]
>
> Sehr geehrte Damen und Herren
>
> Wieder einmal brauche ich eure Hilfe, wie ist es möglich die von mir
> verwendete Wetterstation mit weewx Version 5.0 zu verwenden.
> Ich habe es geschaft die neue Version von weewx zu installieren und auch
> den Treiber. Nur bei der Rekonfiguration zeigt es eine Fehlermeldung an.
>
> Mit diesem Befehl habe ich den Treiber installiert.
> weectl extension install weewx-wh23xx-master.zip
>
> Was habe ich wieder einmal falsch gemacht.
>
> Danke für die Hilfe und noch schöne Osterfeiertage!
>
> Holger DL7HMX schrieb am Freitag, 29. Januar 2021 um 18:00:12 UTC+1:
>
> OK, I set "windchill" and "heatindex" in weewx.conf to "software" (default
> was "hardware"). Now I've got values in weewx's output.
>
> Cheers,
> Holger
>
> Holger DL7HMX schrieb am Montag, 25. Januar 2021 um 23:33:24 UTC+1:
>
> Thank you, Gary. I wasn't aware of that. And indeed, the log during
> startup says that weewx uses python 3.7, although I wasn't aware of
> installing it. I just flashed the whole OS from an image "as is" and never
> updated python. At least that's what I thought.
>
> So, what does that mean now? I'm confused...
>
> Grateful for any clues.
> Holger
>
> The relevant bit from the log:
>
> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Initializing weewx
> version 4.3.0
> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Using Python 3.7.3
> (default, Jul 25 2020, 13:03:44) #012[GCC 8.3.0]
> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Platform
> Linux-5.4.79-v7+-armv7l-with-debian-10.7
> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Locale is
> 'de_DE.UTF-8'
> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Using
> configuration file /etc/weewx/weewx.conf
> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Debug is 1
> Jan 25 23:00:10 raspberrypi weewx[23489] INFO weewx.engine: Loading
> station type WH23xx (user.wh23xx)
> Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: driver version is 0.14
> Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: usb info: pyusb_version=1.0.2
> Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: poll interval is 15
> Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: Found device on USB bus=
> device=
> Jan 25 23:00:10 raspberrypi kernel: [179275.088804] usb 1-1.4: reset
> full-speed USB device number 5 using dwc_otg
> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: StdConvert
> target unit is 0x1
> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Archive will
> use data binding wx_binding
> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Record
> generation will be attempted in 'software'
> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Using archive
> interval of 30 seconds (software record generation)
> Jan 25 23:00:11 raspberrypi weewx[23489] WARNING weewx.engine: Archive
> delay (15) is unusually long
> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx:
> StationRegistry: Registration not requested.
> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: Wunderground:
> Posting not enabled.
> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: PWSweather:
> Posting not enabled.
> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: CWOP: Posting
> not enabled.
> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: WOW: Posting
> not enabled.
> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: AWEKAS: Posting
> not enabled.
> Jan 25 23:00:11 raspberrypi weewx[23489] INFO __main__: Starting up weewx
> version 4.3.0
> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Using binding
> 'wx_binding' to database 'weewx.sdb'
> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.manager: Starting
> backfill of daily summaries
> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Starting main
> packet loop.
> Jan 25 23:00:42 raspberrypi weewx[23489] INFO weewx.engine: Main loop
> exiting. Shutting engine down.
>
> gjr80 schrieb am Sonntag, 24. Januar 2021 um 23:22:38 UTC+1:
>
> On Monday, 25 January 2021 at 07:19:16 UTC+10 Holger DL7HMX wrote:
>
> Hi all,
>
> I've been following your discussion with interest and I've just set up my
> own station:
>
> - WH2315 (Renkforce
>
> <https://www.conrad.de/de/p/renkforce-rf-4406812-funk-wetterstation-vorhersage-fuer-12-bis-24-stunden-2203406.html>
>
> from Conrad)
> - Raspberry Pi 3B
> - weewx 4.3.0
> - driver is wh23xx (I think it's the one that has Edwin's and Bogdan's
> fixes, as it says in the file's preamble "Updated to Python 3 support,
> tested with Renkforce 2315")
> - Python 2.7.16 (according to python -V)
>
>
> Just one point of clarification, python -V will display the python version
> used when the python is invoked from the command line, that is not
> necessarily the version of python used by WeeWX. To find the version of
> python used by WeeWX you need to look at the WeeWX log during startup, it
> will list the python version being used by WeeWX.
>
> Gary
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/e9c1c148-9dfa-4c33-a698-8344376997f0n%40googlegroups.com
>
> <https://groups.google.com/d/msgid/weewx-user/e9c1c148-9dfa-4c33-a698-8344376997f0n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/13a9d7c5-0b03-4f78-815e-f2ac71569729n%40googlegroups.com
>
> <https://groups.google.com/d/msgid/weewx-user/13a9d7c5-0b03-4f78-815e-f2ac71569729n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+...@googlegroups.com.
>
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/d66db270-1e09-4807-b490-9f9d543491b0n%40googlegroups.com
>
> <https://groups.google.com/d/msgid/weewx-user/d66db270-1e09-4807-b490-9f9d543491b0n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>
> --
>
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/zsTwFI7tSlw/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/74ca9e36-1154-4575-a57e-555f667c9c08n%40googlegroups.com
>
> <https://groups.google.com/d/msgid/weewx-user/74ca9e36-1154-4575-a57e-555f667c9c08n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/c4897c6a-6031-4de4-a6b6-c484e39306dfn%40googlegroups.com.
