Hello and again it's me, Günther Wrana from Austria, who can't install the
driver for the Renkforce Wh2315.
Does it no longer work the driver or what have I once again not installed
correctly.
As you can see below, I installed weewx on my Raspberry and chose the
simulation driver.
I then tried to choose a new driver with the weectl station reconfigure
command.
Even before I tried to install the driver for my Renkforce Wh2315.
Not even that worked, so what's wrong and what's the problem?
Thanks for the help Günther
Hallo und wieder bin es ich Günther Wrana aus Österreich der den Treiber
für die Renkforce Wh2315 nicht installieren kann.
Funktioniert es nun nicht mehr der Treiber oder was habe ich nun wieder
einmal nicht richtig installiert.
Wie Ihr unten sehen könnt habe ich weewx auf meinem Raspberry installiert
und den Simulation Treiber gewählt.
Ich habe danach mit dem Befehl weectl station reconfigure versucht einen
neuen Treiber zu wählen.
Noch bevor ich den Treiber für meine Renkforce Wh2315 zu installieren
versuch habe.
Nicht einmal das hat funktioniert also was ist falsch und wo liegt das
Problem?
Danke für die Hilfe Günther
32GB@32GB:~/Downloads $ sudo systemctl start weewx
32GB@32GB:~/Downloads $ sudo systemctl status weewx
● weewx.service - WeeWX
Loaded: loaded (/lib/systemd/system/weewx.service; enabled; preset:
enabled)
Active: active (running) since Sat 2024-08-24 16:58:57 CEST; 2s ago
Docs: https://weewx.com/docs
Main PID: 4631 (python3)
Tasks: 1 (limit: 755)
CPU: 784ms
CGroup: /system.slice/weewx.service
└─4631 python3 /usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.restx: CWOP: Posting not
enabled.
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.restx: WOW: Posting not
enabled.
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.restx: AWEKAS: Posting not
enabled.
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: 'pyephem' detected,
extended almanac data is available
Aug 24 16:58:58 32GB weewxd[4631]: INFO __main__: Starting up weewx version
5.1.0
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: Clock error is -0.26
seconds (positive is fast)
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: Using binding
'wx_binding' to database 'weewx.sdb'
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.manager: Starting backfill of
daily summaries
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.manager: Daily summaries up
to date
Aug 24 16:58:58 32GB weewxd[4631]: INFO weewx.engine: Starting main packet
loop.
32GB@32GB:~/Downloads $ weectl station reconfigure
Error parsing config file: [Errno 13] Permission denied:
'/etc/weewx/weewx.conf'
Traceback (most recent call last):
File "/usr/share/weewx/weeutil/startup.py", line 86, in start_app
config_path, config_dict = weecfg.read_config(config_option,
[config_arg])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/share/weewx/weecfg/__init__.py", line 150, in read_config
config_dict = configobj.ConfigObj(config_path,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/configobj/__init__.py", line 1229,
in __init__
self._load(infile, configspec)
File "/usr/lib/python3/dist-packages/configobj/__init__.py", line 1236,
in _load
with open(infile, 'rb') as h:
^^^^^^^^^^^^^^^^^^
PermissionError: [Errno 13] Permission denied: '/etc/weewx/weewx.conf'
32GB@32GB:~/Downloads $
Tom Keffer schrieb am Samstag, 6. April 2024 um 14:46:09 UTC+2:
> I was just going to point that out!
>
> With V5, it's actually easiest to install directly from the URL:
>
> *weectl extension
> install https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
> <https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip>*
>
>
>
> On Fri, Apr 5, 2024 at 10:53 PM Günther Wrana <kawa...@gmail.com> wrote:
>
>> Hello, I think I have solved the problem.
>> The driver from the following link wget -O weewx-wh23xx.zip
>> https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
>> works, at least there is no error message when reconfiguring the weather
>> cities.
>>
>> Thanks for the help and I'll definitely need something from YOU again
>> soon.
>> Another nice day from Austria
>>
>>
>> Hallo ich glaube ich habe das Problem gelöst.
>> Der Treiber von folgendem Link wget -O weewx-wh23xx.zip
>> https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
>> funktioniert zumindest kommt keine Fehlermeldung bei der Rekonfiguration
>> der Wetterstadtionen.
>>
>> Danke für die Hilfe und ich brauche sicher bald wieder etwas von EUCH.
>> Noch einen schönen Tag aus Österreich
>>
>>
>>
>> 64GB@64GB:~/Downloads $ rm weewx-wh23xx.zip
>> 64GB@64GB:~/Downloads $ wget -O weewx-wh23xx.zip
>> https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
>> --2024-04-06 07:40:19--
>> https://github.com/EdwinGH/weewx-wh23xx/archive/master.zip
>> Resolving github.com (github.com)... 140.82.121.4
>> Connecting to github.com (github.com)|140.82.121.4|:443... connected.
>> HTTP request sent, awaiting response... 302 Found
>> Location:
>> https://codeload.github.com/EdwinGH/weewx-wh23xx/zip/refs/heads/master
>> [following]
>> --2024-04-06 07:40:20--
>> https://codeload.github.com/EdwinGH/weewx-wh23xx/zip/refs/heads/master
>> Resolving codeload.github.com (codeload.github.com)... 140.82.121.10
>> Connecting to codeload.github.com
>> (codeload.github.com)|140.82.121.10|:443...
>> connected.
>> HTTP request sent, awaiting response... 200 OK
>> Length: unspecified [application/zip]
>> Saving to: ‘weewx-wh23xx.zip’
>>
>> weewx-wh23xx.zip [ <=> ] 24.88K --.-KB/s in
>> 0.03s
>>
>> 2024-04-06 07:40:20 (739 KB/s) - ‘weewx-wh23xx.zip’ saved [25472]
>>
>> 64GB@64GB:~/Downloads $ dir
>> weewx-wh23xx.zip
>> 64GB@64GB:~/Downloads $ weectl extension install weewx-wh23xx.zip
>> Using configuration file /etc/weewx/weewx.conf
>> Install extension 'weewx-wh23xx.zip' (y/n)? y
>> Extracting from zip archive weewx-wh23xx.zip
>> Saving installer file to /etc/weewx/bin/user/installer/wh23xx
>> Finished installing extension wh23xx from weewx-wh23xx.zip
>> 64GB@64GB:~/Downloads $ weectl station reconfigure
>> Using configuration file /etc/weewx/weewx.conf
>> Processing configuration file /etc/weewx/weewx.conf
>>
>> Give a description of the station. This will be used for the title of
>> reports.
>> description [2243 Matzen,Österreich Niederösterreich ]:
>>
>> Specify altitude, with units 'foot' or 'meter'. For example:
>> 35, foot
>> 12, meter
>> altitude [199, meter]:
>>
>> Specify latitude in decimal degrees, negative for south.
>> latitude [48.401826]:
>> Specify longitude in decimal degrees, negative for west.
>> longitude [16.686539]:
>>
>> Choose a unit system for the reports. Later, you can modify
>> your choice, or choose a combination of units. Unit systems
>> include:
>> us (ºF, inHg, in, mph)
>> metricwx (ºC, mbar, mm, m/s)
>> metric (ºC, mbar, cm, km/h)
>> unit system [metricwx]:
>>
>> Choose a driver. Installed drivers include:
>> 0) WH23xx (user.wh23xx)
>> 1) AcuRite (weewx.drivers.acurite)
>> 2) CC3000 (weewx.drivers.cc3000)
>> 3) FineOffsetUSB (weewx.drivers.fousb)
>> 4) Simulator (weewx.drivers.simulator)
>> 5) TE923 (weewx.drivers.te923)
>> 6) Ultimeter (weewx.drivers.ultimeter)
>> 7) Vantage (weewx.drivers.vantage)
>> 8) WMR100 (weewx.drivers.wmr100)
>> 9) WMR300 (weewx.drivers.wmr300)
>> 10) WMR9x8 (weewx.drivers.wmr9x8)
>> 11) WS1 (weewx.drivers.ws1)
>> 12) WS23xx (weewx.drivers.ws23xx)
>> 13) WS28xx (weewx.drivers.ws28xx)
>> driver [4]: 0
>>
>> You can register the station on weewx.com, where it will be included in a
>> map. If you choose to register, you will also need a unique URL to
>> identify
>> the station (such as a website, or a WeatherUnderground link).
>> register this station (y/n)? [y] y
>>
>> Now give a unique URL for the station. A Weather Underground
>> URL such as https://www.wunderground.com/dashboard/pws/KORPORT12 will do.
>> Unique URL [http://guentherwrana.ddns.net]:
>> Saving configuration file /etc/weewx/weewx.conf
>> Saved old configuration file as /etc/weewx/weewx.conf.20240406074122
>> 64GB@64GB:~/Downloads $ weectl --version
>> weectl 5.0.2
>> 64GB@64GB:~/Downloads $
>>
>>
>> Tom Keffer schrieb am Donnerstag, 4. April 2024 um 18:27:45 UTC+2:
>>
>>> Günther?
>>>
>>> On Mon, Apr 1, 2024 at 9:19 AM Tom Keffer <tke...@gmail.com> wrote:
>>>
>>>> Two things:
>>>>
>>>> 1. You are still using the original version of the driver. You want my
>>>> patched version at https://github.com/tkeffer/weewx-wh23xx
>>>> 2. What version of weewx are you using? Early beta versions of v5.0
>>>> could not recognize a zip file, but current releases do.
>>>>
>>>> * weectl --version*
>>>>
>>>>
>>>> On Mon, Apr 1, 2024 at 8:48 AM Günther Wrana <kawa...@gmail.com> wrote:
>>>>
>>>>> Hello, this is the message when I install the driver and try to select
>>>>> when reconfiguring
>>>>>
>>>>> Thanks Günther
>>>>>
>>>>> Hallo das ist die Meldung wenn ich den Treiber installiere und
>>>>> versuche bei der Rekonfiguration auszuwählen
>>>>>
>>>>> Danke Günther
>>>>>
>>>>>
>>>>>
>>>>> 64GB@64GB:~/Downloads $ wget -O weewx-wh23xx.zip
>>>>> https://github.com/matthewwall/weewx-wh23xx/archive/master.zip
>>>>> --2024-04-01 17:27:53--
>>>>> https://github.com/matthewwall/weewx-wh23xx/archive/master.zip
>>>>> Resolving github.com (github.com)... 140.82.121.3
>>>>> Connecting to github.com (github.com)|140.82.121.3|:443... connected.
>>>>> HTTP request sent, awaiting response... 302 Found
>>>>> Location:
>>>>> https://codeload.github.com/matthewwall/weewx-wh23xx/zip/refs/heads/master
>>>>>
>>>>> [following]
>>>>> --2024-04-01 17:27:53--
>>>>> https://codeload.github.com/matthewwall/weewx-wh23xx/zip/refs/heads/master
>>>>> Resolving codeload.github.com (codeload.github.com)... 140.82.121.9
>>>>> Connecting to codeload.github.com
>>>>> (codeload.github.com)|140.82.121.9|:443...
>>>>> connected.
>>>>> HTTP request sent, awaiting response... 200 OK
>>>>> Length: unspecified [application/zip]
>>>>> Saving to: ‘weewx-wh23xx.zip’
>>>>>
>>>>> weewx-wh23xx.zip [ <=> ] 23.64K --.-KB/s in
>>>>> 0.03s
>>>>>
>>>>> 2024-04-01 17:27:54 (837 KB/s) - ‘weewx-wh23xx.zip’ saved [24210]
>>>>>
>>>>> 64GB@64GB:~/Downloads $ weectl extension install
>>>>> weewx-wh23xx-master.zip
>>>>> Using configuration file /etc/weewx/weewx.conf
>>>>> Install extension 'weewx-wh23xx-master.zip' (y/n)? y
>>>>> Traceback (most recent call last):
>>>>> File "/usr/share/weewx/weectl.py", line 74, in <module>
>>>>> main()
>>>>> File "/usr/share/weewx/weectl.py", line 66, in main
>>>>> namespace.func(namespace)
>>>>> File "/usr/share/weewx/weectllib/__init__.py", line 121, in dispatch
>>>>> namespace.action_func(config_dict, namespace)
>>>>> File "/usr/share/weewx/weectllib/extension_cmd.py", line 116, in
>>>>> install_extension
>>>>> ext.install_extension(namespace.source, no_confirm=namespace.yes)
>>>>> File "/usr/share/weewx/weecfg/extension.py", line 143, in
>>>>> install_extension
>>>>> raise InstallError(f"Unrecognized type for {extension_path}")
>>>>> weecfg.extension.InstallError: Unrecognized type for
>>>>> weewx-wh23xx-master.zip
>>>>> 64GB@64GB:~/Downloads $ weectl station reconfigure
>>>>> Using configuration file /etc/weewx/weewx.conf
>>>>> Processing configuration file /etc/weewx/weewx.conf
>>>>>
>>>>> Give a description of the station. This will be used for the title of
>>>>> reports.
>>>>> description [2243 Matzen,Österreich Niederösterreich ]:
>>>>>
>>>>> Specify altitude, with units 'foot' or 'meter'. For example:
>>>>> 35, foot
>>>>> 12, meter
>>>>> altitude [199, meter]:
>>>>>
>>>>> Specify latitude in decimal degrees, negative for south.
>>>>> latitude [48.401826]:
>>>>> Specify longitude in decimal degrees, negative for west.
>>>>> longitude [16.686539]:
>>>>>
>>>>> Choose a unit system for the reports. Later, you can modify
>>>>> your choice, or choose a combination of units. Unit systems
>>>>> include:
>>>>> us (ºF, inHg, in, mph)
>>>>> metricwx (ºC, mbar, mm, m/s)
>>>>> metric (ºC, mbar, cm, km/h)
>>>>> unit system [metricwx]:
>>>>>
>>>>> Choose a driver. Installed drivers include:
>>>>> 0) ? (user.wh23xx) invalid syntax
>>>>> (wh23xx.py, line 427)
>>>>> 1) AcuRite (weewx.drivers.acurite)
>>>>> 2) CC3000 (weewx.drivers.cc3000)
>>>>> 3) FineOffsetUSB (weewx.drivers.fousb)
>>>>> 4) Simulator (weewx.drivers.simulator)
>>>>> 5) TE923 (weewx.drivers.te923)
>>>>> 6) Ultimeter (weewx.drivers.ultimeter)
>>>>> 7) Vantage (weewx.drivers.vantage)
>>>>> 8) WMR100 (weewx.drivers.wmr100)
>>>>> 9) WMR300 (weewx.drivers.wmr300)
>>>>> 10) WMR9x8 (weewx.drivers.wmr9x8)
>>>>> 11) WS1 (weewx.drivers.ws1)
>>>>> 12) WS23xx (weewx.drivers.ws23xx)
>>>>> 13) WS28xx (weewx.drivers.ws28xx)
>>>>> driver [4]:
>>>>>
>>>>> Tom Keffer schrieb am Sonntag, 31. März 2024 um 17:48:37 UTC+2:
>>>>>
>>>>>> I did a quick port of the driver. It has *not* been tested!
>>>>>>
>>>>>> Find it here: https://github.com/tkeffer/weewx-wh23xx
>>>>>>
>>>>>> If it works for you, I'll ask Matthew to incorporate the changes.
>>>>>>
>>>>>> -tk
>>>>>>
>>>>>> On Sun, Mar 31, 2024 at 2:12 AM Tom Keffer <tke...@gmail.com> wrote:
>>>>>>
>>>>>>> It appears that the wh23xx driver has not been ported to Python 2.
>>>>>>>
>>>>>>> On Sun, Mar 31, 2024 at 1:33 AM Günther Wrana <kawa...@gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Ladies and Gentlemen
>>>>>>>>
>>>>>>>> Once again I need your help, how is it possible to use the weather
>>>>>>>> station I use with weewx version 5.0.
>>>>>>>> I managed to install the new version of weewx and also the driver.
>>>>>>>> It only shows an error message during reconfiguration.
>>>>>>>> With this command I installed the driver
>>>>>>>> weektl extension install weewx-wh23xx-master.zip
>>>>>>>>
>>>>>>>>
>>>>>>>> What have I done wrong again?
>>>>>>>>
>>>>>>>> Thanks for the help and have a nice Easter holidays!
>>>>>>>>
>>>>>>>> [image: Bildschirmfoto von 2024-03-31 10-27-33.png]
>>>>>>>>
>>>>>>>> Sehr geehrte Damen und Herren
>>>>>>>>
>>>>>>>> Wieder einmal brauche ich eure Hilfe, wie ist es möglich die von
>>>>>>>> mir verwendete Wetterstation mit weewx Version 5.0 zu verwenden.
>>>>>>>> Ich habe es geschaft die neue Version von weewx zu installieren und
>>>>>>>> auch den Treiber. Nur bei der Rekonfiguration zeigt es eine
>>>>>>>> Fehlermeldung
>>>>>>>> an.
>>>>>>>>
>>>>>>>> Mit diesem Befehl habe ich den Treiber installiert.
>>>>>>>> weectl extension install weewx-wh23xx-master.zip
>>>>>>>>
>>>>>>>> Was habe ich wieder einmal falsch gemacht.
>>>>>>>>
>>>>>>>> Danke für die Hilfe und noch schöne Osterfeiertage!
>>>>>>>>
>>>>>>>> Holger DL7HMX schrieb am Freitag, 29. Januar 2021 um 18:00:12 UTC+1:
>>>>>>>>
>>>>>>>>> OK, I set "windchill" and "heatindex" in weewx.conf to "software"
>>>>>>>>> (default was "hardware"). Now I've got values in weewx's output.
>>>>>>>>>
>>>>>>>>> Cheers,
>>>>>>>>> Holger
>>>>>>>>>
>>>>>>>>> Holger DL7HMX schrieb am Montag, 25. Januar 2021 um 23:33:24 UTC+1:
>>>>>>>>>
>>>>>>>>>> Thank you, Gary. I wasn't aware of that. And indeed, the log
>>>>>>>>>> during startup says that weewx uses python 3.7, although I wasn't
>>>>>>>>>> aware of
>>>>>>>>>> installing it. I just flashed the whole OS from an image "as is" and
>>>>>>>>>> never
>>>>>>>>>> updated python. At least that's what I thought.
>>>>>>>>>>
>>>>>>>>>> So, what does that mean now? I'm confused...
>>>>>>>>>>
>>>>>>>>>> Grateful for any clues.
>>>>>>>>>> Holger
>>>>>>>>>>
>>>>>>>>>> The relevant bit from the log:
>>>>>>>>>>
>>>>>>>>>> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__:
>>>>>>>>>> Initializing weewx version 4.3.0
>>>>>>>>>> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Using
>>>>>>>>>> Python 3.7.3 (default, Jul 25 2020, 13:03:44) #012[GCC 8.3.0]
>>>>>>>>>> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Platform
>>>>>>>>>> Linux-5.4.79-v7+-armv7l-with-debian-10.7
>>>>>>>>>> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Locale is
>>>>>>>>>> 'de_DE.UTF-8'
>>>>>>>>>> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Using
>>>>>>>>>> configuration file /etc/weewx/weewx.conf
>>>>>>>>>> Jan 25 23:00:10 raspberrypi weewx[23489] INFO __main__: Debug is 1
>>>>>>>>>> Jan 25 23:00:10 raspberrypi weewx[23489] INFO weewx.engine:
>>>>>>>>>> Loading station type WH23xx (user.wh23xx)
>>>>>>>>>> Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: driver version is
>>>>>>>>>> 0.14
>>>>>>>>>> Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: usb info:
>>>>>>>>>> pyusb_version=1.0.2
>>>>>>>>>> Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: poll interval is 15
>>>>>>>>>> Jan 25 23:00:10 raspberrypi /weewxd: wh23xx: Found device on USB
>>>>>>>>>> bus= device=
>>>>>>>>>> Jan 25 23:00:10 raspberrypi kernel: [179275.088804] usb 1-1.4:
>>>>>>>>>> reset full-speed USB device number 5 using dwc_otg
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine:
>>>>>>>>>> StdConvert target unit is 0x1
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine:
>>>>>>>>>> Archive will use data binding wx_binding
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine:
>>>>>>>>>> Record generation will be attempted in 'software'
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Using
>>>>>>>>>> archive interval of 30 seconds (software record generation)
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] WARNING weewx.engine:
>>>>>>>>>> Archive delay (15) is unusually long
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx:
>>>>>>>>>> StationRegistry: Registration not requested.
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx:
>>>>>>>>>> Wunderground: Posting not enabled.
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx:
>>>>>>>>>> PWSweather: Posting not enabled.
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: CWOP:
>>>>>>>>>> Posting not enabled.
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx: WOW:
>>>>>>>>>> Posting not enabled.
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.restx:
>>>>>>>>>> AWEKAS: Posting not enabled.
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] INFO __main__: Starting
>>>>>>>>>> up weewx version 4.3.0
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine: Using
>>>>>>>>>> binding 'wx_binding' to database 'weewx.sdb'
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.manager:
>>>>>>>>>> Starting backfill of daily summaries
>>>>>>>>>> Jan 25 23:00:11 raspberrypi weewx[23489] INFO weewx.engine:
>>>>>>>>>> Starting main packet loop.
>>>>>>>>>> Jan 25 23:00:42 raspberrypi weewx[23489] INFO weewx.engine: Main
>>>>>>>>>> loop exiting. Shutting engine down.
>>>>>>>>>>
>>>>>>>>>> gjr80 schrieb am Sonntag, 24. Januar 2021 um 23:22:38 UTC+1:
>>>>>>>>>>
>>>>>>>>>>> On Monday, 25 January 2021 at 07:19:16 UTC+10 Holger DL7HMX
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi all,
>>>>>>>>>>>>
>>>>>>>>>>>> I've been following your discussion with interest and I've just
>>>>>>>>>>>> set up my own station:
>>>>>>>>>>>>
>>>>>>>>>>>> - WH2315 (Renkforce
>>>>>>>>>>>>
>>>>>>>>>>>> <https://www.conrad.de/de/p/renkforce-rf-4406812-funk-wetterstation-vorhersage-fuer-12-bis-24-stunden-2203406.html>
>>>>>>>>>>>>
>>>>>>>>>>>> from Conrad)
>>>>>>>>>>>> - Raspberry Pi 3B
>>>>>>>>>>>> - weewx 4.3.0
>>>>>>>>>>>> - driver is wh23xx (I think it's the one that has Edwin's
>>>>>>>>>>>> and Bogdan's fixes, as it says in the file's preamble "Updated
>>>>>>>>>>>> to Python 3
>>>>>>>>>>>> support, tested with Renkforce 2315")
>>>>>>>>>>>> - Python 2.7.16 (according to python -V)
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> Just one point of clarification, python -V will display the
>>>>>>>>>>> python version used when the python is invoked from the command
>>>>>>>>>>> line, that
>>>>>>>>>>> is not necessarily the version of python used by WeeWX. To find the
>>>>>>>>>>> version
>>>>>>>>>>> of python used by WeeWX you need to look at the WeeWX log during
>>>>>>>>>>> startup,
>>>>>>>>>>> it will list the python version being used by WeeWX.
>>>>>>>>>>>
>>>>>>>>>>> Gary
>>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups "weewx-user" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send an email to weewx-user+...@googlegroups.com.
>>>>>>>> To view this discussion on the web visit
>>>>>>>> https://groups.google.com/d/msgid/weewx-user/e9c1c148-9dfa-4c33-a698-8344376997f0n%40googlegroups.com
>>>>>>>>
>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/e9c1c148-9dfa-4c33-a698-8344376997f0n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>> .
>>>>>>>>
>>>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "weewx-user" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to weewx-user+...@googlegroups.com.
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/d/msgid/weewx-user/13a9d7c5-0b03-4f78-815e-f2ac71569729n%40googlegroups.com
>>>>>
>>>>> <https://groups.google.com/d/msgid/weewx-user/13a9d7c5-0b03-4f78-815e-f2ac71569729n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>> .
>>>>>
>>>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+...@googlegroups.com.
>>
> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/d66db270-1e09-4807-b490-9f9d543491b0n%40googlegroups.com
>>
>> <https://groups.google.com/d/msgid/weewx-user/d66db270-1e09-4807-b490-9f9d543491b0n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/74ca9e36-1154-4575-a57e-555f667c9c08n%40googlegroups.com.
