On 2021-12-13 07:50, iw1...@gmail.com wrote:
We received the board at end of June 2020 and not used that much due
to Covid restriction in accessing the lab.
I think it was working with “old” GNU-Radio (version 2), but in May
2021 we updated everything to GNU-Radio 3 (including Linux
distribution, etc.). At that point, I had problem since GNU-Radio was
complaining that the FPGA image was not in line with the USRP drivers,
and it asked to upgrade it using the image loader.
I did it, and the USPR stopped working (i.e. the image loading was not
successful, with same above error). We recovered using Vivado, and
this is where we are now.
I may try to upload the image using the PCIe interface on another
machine. That is the only other thing that I can think about now.
Just to confirm--you're running the as-supplied-by-Ettus images on the
X310 when this happens?
Also make sure that you're loading images that are compatible with the
version of UHD you're running. Use
uhd_images_downloader
To download compatible images to your PC.
IF that fails, you could try following the "unbricking" procedure here:
https://kb.ettus.com/X300/X310_Device_Recovery
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
