On 2021-12-03 10:02, iw1...@gmail.com wrote:
The NIC is an Intel X710 Dual Port 10Gb Direct Attach, SFP+,PCIe. MTU
is now 9000. I tried now with 1500, but still same error. I still have
to check with new image, if any.
My "hunch" is that packets are getting lost or re-ordered during the
FPGA image load over the network connection, which is why I had you
check with different
MTUs.
Have you replaced the cable? SFP+ module? Is this direct or through a
switch?
|abusso@ttclabsdr:~$ ifconfig eno1:
flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet
10.181.165.152 netmask 255.255.252.0 broadcast 10.181.167.255 inet6
fe80::a6bb:6dff:feae:de8 prefixlen 64 scopeid 0x20<link> ether
a4:bb:6d:ae:0d:e8 txqueuelen 1000 (Ethernet) RX packets 543759 bytes
60330968 (60.3 MB) RX errors 0 dropped 8713 overruns 0 frame 0 TX
packets 24251 bytes 13359677 (13.3 MB) TX errors 0 dropped 0 overruns
0 carrier 0 collisions 0 device interrupt 16 memory
0x92f00000-92f20000 enp4s0f0:
flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.30.1
netmask 255.255.255.0 broadcast 192.168.30.255 inet6
fe80::faf2:1eff:fe98:e70 prefixlen 64 scopeid 0x20<link> ether
f8:f2:1e:98:0e:70 txqueuelen 1000 (Ethernet) RX packets 2493 bytes
3406398 (3.4 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets
2662 bytes 4716866 (4.7 MB) TX errors 0 dropped 0 overruns 0 carrier 0
collisions 0 enp4s0f1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu
1500 inet 192.168.40.1 netmask 255.255.255.0 broadcast 192.168.40.255
inet6 fe80::faf2:1eff:fe98:e71 prefixlen 64 scopeid 0x20<link> ether
f8:f2:1e:98:0e:71 txqueuelen 1000 (Ethernet) RX packets 305761 bytes
76146924 (76.1 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets
24113 bytes 38423211 (38.4 MB) TX errors 0 dropped 0 overruns 0
carrier 0 collisions 0 enx0050b661c3db:
flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.100.1
netmask 255.255.255.0 broadcast 192.168.100.255 inet6
fe80::250:b6ff:fe61:c3db prefixlen 64 scopeid 0x20<link> ether
00:50:b6:61:c3:db txqueuelen 1000 (Ethernet) RX packets 8896 bytes
585296 (585.2 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets
310 bytes 38402 (38.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0
collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet
127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback) RX packets 7296 bytes 23262505
(23.2 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 7296
bytes 23262505 (23.2 MB) TX errors 0 dropped 0 overruns 0 carrier 0
collisions 0 abusso@ttclabsdr:~$ uhd_image_loader --args
"type=x300,addr=192.168.30.2" linux; GNU C++ version 7.3.0;
Boost_106501; UHD_003.010.003.000-0-unknown Unit: USRP X310 (31D7872,
192.168.30.2) FPGA Image: /usr/share/uhd/images/usrp_x310_fpga_XG.bit
failed. Error: RuntimeError: Device reported an error during
initialization. abusso@ttclabsdr:~$|
_______________________________________________
USRP-users mailing list --usrp-users@lists.ettus.com
To unsubscribe send an email tousrp-users-le...@lists.ettus.com
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
