On Mon, Jun 14, 2010 at 1:42 PM, Vipin KUMAR <vipin.ku...@st.com> wrote: > On 6/11/2010 11:44 AM, vipink wrote: >> Dear Tom, Wolfgang, >> >> Can you please let me know the status of the remainging patches of this >> patch-set. >> I have not received any reply after sending v3 patch a long time back >> > > Dear Tom, Wolfgang > > A gentle reminder >
Dear Tom, Wolfgang I am still waiting for a reply or the acceptance of the related this patch series Thanks in advance Regards Vipin > Regards > Vipin >> These are the Acks I have already received >> >> SPEAr : Configuring FSMC driver for NAND interface >> http://www.mail-archive.com/u-boot@lists.denx.de/msg31656.html >> SPEAr : FSMC driver support added >> http://www.mail-archive.com/u-boot@lists.denx.de/msg31655.html >> SPEAr : i2c driver moved completely into drivers/i2c >> http://www.mail-archive.com/u-boot@lists.denx.de/msg31604.html >> SPEAr : USB Device Controller driver support added >> http://www.mail-archive.com/u-boot@lists.denx.de/msg32362.html >> SPEAr : macb driver support added for spear310 and spear320 >> http://www.mail-archive.com/u-boot@lists.denx.de/msg33153.html >> SPEAr : Network support configured for spear SoCs >> http://www.mail-archive.com/u-boot@lists.denx.de/msg33152.html >> >> Thanks in advance >> >> Regards >> Vipin >> >> On 5/28/2010 10:22 PM, Vipin Kumar wrote: >>> Dear Wolfgang, >>> >>> This patch-set as been pending for a long time and it seems Tom is also away >>> from mails. A few patches have already been Acked by respective device >>> owners >>> >>> Please let me know how do I get this patch-set included in 2006.06 release >>> >>> Thanks in advance >>> Vipin >>> >>> On Fri, May 14, 2010 at 8:26 AM, Vipin KUMAR <vipin.ku...@st.com> wrote: >>>> Dear Tom, >>>> >>>> I am still waiting for Ack/feedback if any on this patchset v3 >>>> All feedbacks provided by you on patchset v2 have been incorporated >>>> >>>> Regards >>>> Vipin >>>> >>>> On 5/9/2010 7:46 PM, Vipin Kumar wrote: >>>>> Hello Tom, >>>>> >>>>> Please consider this patch-set for mainline submission. >>>>> Please let me know if there are any changes to be made >>>>> in code or if the patches are good to go into mainline >>>>> >>>>> Thanks & Regards >>>>> Vipin >>>>> >>>>> On Thu, May 6, 2010 at 4:48 PM, Vipin KUMAR <vipin.ku...@st.com> wrote: >>>>>> Hello Tom, >>>>>> The following patch-set contains all the accepted feedbacks on >>>>>> patch-set v2. >>>>>> Please consider this for submission into mainline >>>>>> >>>>>> Below changes are introduced other than the recieved review comments >>>>>> 1. Introduced a CONFIG_DW_SEARCH_PHY definition, which if defined >>>>>> searches >>>>>> the ethernet phy address. Searching was always enabled in earlier patch >>>>>> 2. Introduced a new function dw_write_hwaddr in ethernet driver and >>>>>> registered it as a callback via dev->write_hwaddr. This is a new >>>>>> feature >>>>>> recently implemented by Ben. >>>>>> >>>>>> Thanks in advance >>>>>> >>>>>> Regards >>>>>> Vipin >>>>>> >>>>>> Vipin Kumar (19): >>>>>> u-boot.img file not created when srctree and objtree are different >>>>>> change_bit routine defined >>>>>> SPEAr : SMI erase and write timeouts increased >>>>>> SPEAr : Placing ethaddr write and read within CONFIG_CMD_NET >>>>>> SPEAr : Reducing the max RAM size to 128MB >>>>>> SPEAr : Basic arch related support added for SPEAr SoCs >>>>>> SPEAr : Network driver support added >>>>>> SPEAr : Network support configured for spear SoCs >>>>>> SPEAr : macb driver support added for spear310 and spear320 >>>>>> SPEAr : FSMC driver support added >>>>>> SPEAr : Configuring FSMC driver for NAND interface >>>>>> SPEAr : i2c driver moved completely into drivers/i2c >>>>>> SPEAr : smi driver moved completely into drivers/mtd >>>>>> SPEAr : USB Device Controller driver support added >>>>>> SPEAr : Supporting various configurations for spear3xx and spear6xx >>>>>> boards >>>>>> SPEAr : Basic spear1300 architecture support added >>>>>> SPEAr : spear1300 SoC support added >>>>>> SPEAr : Removing extraneous code >>>>>> SPEAr : USB device controller bugfixes >>>>>> >>>>>> MAINTAINERS | 1 + >>>>>> MAKEALL | 1 + >>>>>> Makefile | 30 +- >>>>>> arch/arm/cpu/arm926ejs/spear/Makefile | 3 +- >>>>>> arch/arm/cpu/arm926ejs/spear/cpu.c | 78 +++ >>>>>> arch/arm/cpu/arm_cortexa8/spear13xx/Makefile | 52 ++ >>>>>> arch/arm/cpu/arm_cortexa8/spear13xx/cache.S | 114 +++++ >>>>>> arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c | 96 ++++ >>>>>> .../arm_cortexa8/spear13xx/reset.c} | 52 +-- >>>>>> arch/arm/cpu/arm_cortexa8/spear13xx/timer.c | 138 +++++ >>>>>> .../arm/include/asm/arch-spear/clk.h | 26 +- >>>>>> arch/arm/include/asm/arch-spear/hardware.h | 16 +- >>>>>> arch/arm/include/asm/arch-spear/spr_misc.h | 5 + >>>>>> .../arm/include/asm/arch-spear13xx/hardware.h | 33 +- >>>>>> arch/arm/include/asm/arch-spear13xx/spr_gpt.h | 85 ++++ >>>>>> arch/arm/include/asm/arch-spear13xx/spr_misc.h | 317 ++++++++++++ >>>>>> .../arm/include/asm/arch-spear13xx/sys_proto.h | 29 +- >>>>>> arch/arm/include/asm/bitops.h | 11 +- >>>>>> board/spear/common/Makefile | 10 +- >>>>>> board/spear/common/spr_misc.c | 28 +- >>>>>> board/spear/spear1300/Makefile | 51 ++ >>>>>> board/spear/spear1300/config.mk | 28 + >>>>>> board/spear/spear1300/spear1300.c | 88 ++++ >>>>>> .../spear/spear1300/spr_lowlevel_init.S | 35 +- >>>>>> board/spear/spear300/config.mk | 11 - >>>>>> board/spear/spear300/spear300.c | 15 +- >>>>>> board/spear/spear310/config.mk | 11 - >>>>>> board/spear/spear310/spear310.c | 36 ++- >>>>>> board/spear/spear320/config.mk | 11 - >>>>>> board/spear/spear320/spear320.c | 23 +- >>>>>> board/spear/spear600/config.mk | 11 - >>>>>> board/spear/spear600/spear600.c | 15 +- >>>>>> doc/README.designware_eth | 25 + >>>>>> doc/README.spear | 46 ++- >>>>>> drivers/i2c/Makefile | 2 +- >>>>>> drivers/i2c/{spr_i2c.c => designware_i2c.c} | 4 +- >>>>>> .../spr_i2c.h => drivers/i2c/designware_i2c.h | 6 +- >>>>>> drivers/mtd/Makefile | 2 +- >>>>>> drivers/mtd/nand/Makefile | 2 +- >>>>>> drivers/mtd/nand/fsmc_nand.c | 366 ++++++++++++++ >>>>>> drivers/mtd/nand/spr_nand.c | 124 ----- >>>>>> drivers/mtd/{spr_smi.c => st_smi.c} | 59 ++- >>>>>> .../arch-spear/spr_smi.h => drivers/mtd/st_smi.h | 8 +- >>>>>> drivers/net/Makefile | 1 + >>>>>> drivers/net/designware.c | 531 >>>>>> ++++++++++++++++++++ >>>>>> drivers/net/designware.h | 264 ++++++++++ >>>>>> drivers/serial/usbtty.h | 4 +- >>>>>> drivers/usb/gadget/Makefile | 2 +- >>>>>> drivers/usb/gadget/{spr_udc.c => designware_udc.c} | 116 +++-- >>>>>> include/configs/spear-common.h | 33 +- >>>>>> include/configs/spear13xx_evb.h | 202 ++++++++ >>>>>> include/configs/{spear3xx.h => spear3xx_evb.h} | 30 ++ >>>>>> include/configs/{spear6xx.h => spear6xx_evb.h} | 13 + >>>>>> include/linux/mtd/fsmc_nand.h | 104 ++++ >>>>>> include/netdev.h | 1 + >>>>>> include/usb/{spr_udc.h => designware_udc.h} | 6 +- >>>>>> 56 files changed, 2993 insertions(+), 418 deletions(-) >>>>>> create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c >>>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/Makefile >>>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cache.S >>>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/cpu.c >>>>>> rename arch/arm/{include/asm/arch-spear/spr_nand.h => >>>>>> cpu/arm_cortexa8/spear13xx/reset.c} (50%) >>>>>> mode change 100644 => 100755 >>>>>> create mode 100644 arch/arm/cpu/arm_cortexa8/spear13xx/timer.c >>>>>> copy include/configs/spear6xx.h => >>>>>> arch/arm/include/asm/arch-spear/clk.h (64%) >>>>>> copy include/configs/spear6xx.h => >>>>>> arch/arm/include/asm/arch-spear13xx/hardware.h (58%) >>>>>> create mode 100644 arch/arm/include/asm/arch-spear13xx/spr_gpt.h >>>>>> create mode 100644 arch/arm/include/asm/arch-spear13xx/spr_misc.h >>>>>> copy include/configs/spear6xx.h => >>>>>> arch/arm/include/asm/arch-spear13xx/sys_proto.h (64%) >>>>>> create mode 100644 board/spear/spear1300/Makefile >>>>>> create mode 100644 board/spear/spear1300/config.mk >>>>>> create mode 100644 board/spear/spear1300/spear1300.c >>>>>> copy include/configs/spear6xx.h => >>>>>> board/spear/spear1300/spr_lowlevel_init.S (56%) >>>>>> create mode 100644 doc/README.designware_eth >>>>>> rename drivers/i2c/{spr_i2c.c => designware_i2c.c} (98%) >>>>>> rename arch/arm/include/asm/arch-spear/spr_i2c.h => >>>>>> drivers/i2c/designware_i2c.h (98%) >>>>>> create mode 100644 drivers/mtd/nand/fsmc_nand.c >>>>>> delete mode 100644 drivers/mtd/nand/spr_nand.c >>>>>> rename drivers/mtd/{spr_smi.c => st_smi.c} (94%) >>>>>> rename arch/arm/include/asm/arch-spear/spr_smi.h => >>>>>> drivers/mtd/st_smi.h (96%) >>>>>> create mode 100644 drivers/net/designware.c >>>>>> create mode 100644 drivers/net/designware.h >>>>>> rename drivers/usb/gadget/{spr_udc.c => designware_udc.c} (91%) >>>>>> create mode 100644 include/configs/spear13xx_evb.h >>>>>> rename include/configs/{spear3xx.h => spear3xx_evb.h} (85%) >>>>>> rename include/configs/{spear6xx.h => spear6xx_evb.h} (82%) >>>>>> create mode 100644 include/linux/mtd/fsmc_nand.h >>>>>> rename include/usb/{spr_udc.h => designware_udc.h} (98%) >>>>>> >>>>>> _______________________________________________ >>>>>> U-Boot mailing list >>>>>> U-Boot@lists.denx.de >>>>>> http://lists.denx.de/mailman/listinfo/u-boot >>>>>> >>>>> >>>> >>>> >>> >> > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
