u-boot  

Messages by Thread

• • Re: [PATCH v1 11/13] reset: stm32mp25: add stm32mp25 reset driver Gabriel FERNANDEZ
  • Re: [PATCH v1 11/13] reset: stm32mp25: add stm32mp25 reset driver Patrice CHOTARD
  • [PATCH v1 06/13] sandbox: test: update for CONFIG_CLK_AUTO_ID support Patrice Chotard
  • [PATCH v1 07/13] clk: fixed_rate: configure clock ID with CONFIG_CLK_AUTO_ID Patrice Chotard
  • [PATCH v1 03/13] clk: stm32mp25: implement clock check security function Patrice Chotard
  • [PATCH v1 12/13] ARM: dts: stm32: switch from fixed to scmi clocks for stm32mp257f-ev1 Patrice Chotard
• [PATCH 0/3] sntp for NET_LWIP Jerome Forissier
  • [PATCH 3/3] configs: qemu_arm64_lwip_defconfig: enable CMD_SNTP Jerome Forissier
  • [PATCH 1/3] net: extract function net_sntp_set_rtc() from sntp_handler() Jerome Forissier
  • Re: [PATCH 1/3] net: extract function net_sntp_set_rtc() from sntp_handler() Heinrich Schuchardt
  • Re: [PATCH 1/3] net: extract function net_sntp_set_rtc() from sntp_handler() Tom Rini
  • [PATCH 2/3] net: lwip: add sntp command Jerome Forissier
  • Re: [PATCH 2/3] net: lwip: add sntp command Heinrich Schuchardt
  • Re: [PATCH 2/3] net: lwip: add sntp command Heinrich Schuchardt
  • Re: [PATCH 2/3] net: lwip: add sntp command Jerome Forissier
  • Re: [PATCH 2/3] net: lwip: add sntp command Jerome Forissier
  • Re: [PATCH 2/3] net: lwip: add sntp command Tom Rini
  • Re: [PATCH 2/3] net: lwip: add sntp command Jerome Forissier
  • Re: [PATCH 2/3] net: lwip: add sntp command Tom Rini
  • Re: [PATCH 0/3] sntp for NET_LWIP Tim Harvey
  • Re: [PATCH 0/3] sntp for NET_LWIP Jerome Forissier
  • Re: [PATCH 0/3] sntp for NET_LWIP E Shattow
  • Re: [PATCH 0/3] sntp for NET_LWIP Heinrich Schuchardt
  • Re: [PATCH 0/3] sntp for NET_LWIP Tom Rini
• Re: [PATCH v2] usb: onboard-hub: Fix return type for regulator APIs Michal Simek
  • Re: [PATCH v2] usb: onboard-hub: Fix return type for regulator APIs Michal Simek
• Re: [PATCH] drivers: fpga: intel_sdm_mb: Flush cache before FPGA configuration Michal Simek
• [PATCH 0/4] watchdog for STM32MP family Antonio Borneo
  • [PATCH 4/4] watchdog: don't autostart watchdog on STM32MP boards Antonio Borneo
  • Re: [PATCH 4/4] watchdog: don't autostart watchdog on STM32MP boards Patrick DELAUNAY
  • Re: [PATCH 4/4] watchdog: don't autostart watchdog on STM32MP boards Antonio Borneo
  • [PATCH 1/4] watchdog: wdt-uclass.c: add wdt_set_force_autostart() helper Antonio Borneo
  • [PATCH 3/4] watchdog: stm32mp: check the watchdog status Antonio Borneo
  • [PATCH 2/4] watchdog: arm_smc_wdt: get wdt status through SMCWD_GET_TIMELEFT Antonio Borneo
  • [PATCH v2 0/4] watchdog for STM32MP family Antonio Borneo
  • [PATCH v2 2/4] watchdog: arm_smc_wdt: get wdt status through SMCWD_GET_TIMELEFT Antonio Borneo
  • Re: [PATCH v2 2/4] watchdog: arm_smc_wdt: get wdt status through SMCWD_GET_TIMELEFT Patrice CHOTARD
  • [PATCH v2 4/4] watchdog: don't autostart watchdog on STM32MP architecture Antonio Borneo
  • Re: [PATCH v2 4/4] watchdog: don't autostart watchdog on STM32MP architecture Patrice CHOTARD
  • [PATCH v2 1/4] watchdog: wdt-uclass.c: add wdt_set_force_autostart() helper Antonio Borneo
  • Re: [PATCH v2 1/4] watchdog: wdt-uclass.c: add wdt_set_force_autostart() helper Patrice CHOTARD
  • [PATCH v2 3/4] watchdog: stm32mp: check the watchdog status Antonio Borneo
  • Re: [PATCH v2 3/4] watchdog: stm32mp: check the watchdog status Patrice CHOTARD
• [PATCH v3 0/4] mkimage: validate image references in FIT configurations Aristo Chen
  • [PATCH v3 2/4] tools: mkimage: validate image references in FIT configurations Aristo Chen
  • [PATCH v3 1/4] tools: mkimage: propagate error codes from fit_handle_file() Aristo Chen
  • [PATCH v3 3/4] binman: test: Ensure all config references exist in /images node Aristo Chen
  • [PATCH v3 4/4] test: py: add mkimage test for undefined image references in FIT configs Aristo Chen
  • Re: [PATCH v3 0/4] mkimage: validate image references in FIT configurations Tom Rini
• Save sspi output bytes in variable Valentina Skorpion
• [PATCH] caam: Fix CAAM error on startup Fabio Estevam
  • Re: [PATCH] caam: Fix CAAM error on startup Fabio Estevam
• [GIT PULL] u-boot-riscv/master Leo Liang
  • Re: [GIT PULL] u-boot-riscv/master Tom Rini
  • Re: [GIT PULL] u-boot-riscv/master Conor Dooley
  • Re: [GIT PULL] u-boot-riscv/master Tom Rini
  • Re: [GIT PULL] u-boot-riscv/master Leo Liang
  • Re: [GIT PULL] u-boot-riscv/master Tom Rini
  • Re: [GIT PULL] u-boot-riscv/master Yao Zi
  • Re: [GIT PULL] u-boot-riscv/master Conor Dooley
  • Re: [GIT PULL] u-boot-riscv/master Mayuresh Chitale
  • Re: [GIT PULL] u-boot-riscv/master Conor Dooley
  • Re: [GIT PULL] u-boot-riscv/master Tom Rini
  • Re: [GIT PULL] u-boot-riscv/master Mayuresh Chitale
  • Re: [GIT PULL] u-boot-riscv/master Tom Rini
  • Re: [GIT PULL] u-boot-riscv/master Mayuresh Chitale
  • Re: [GIT PULL] u-boot-riscv/master Tom Rini
• [PATCH v3 1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table Dario Binacchi
  • [PATCH v3 3/4] board: bsh: imx6ulz_smm_m2: Add support for 512 MiB DRAM Dario Binacchi
  • [PATCH v3 2/4] board: bsh: imx6ulz_smm_m2: Add support for 256 MiB DRAM Dario Binacchi
  • [PATCH v3 4/4] board: bsh: imx6ulz_smm_m2: Add delay between DRAM read access Dario Binacchi
  • Re: [PATCH v3 1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table Fabio Estevam
• [PATCH v3 0/6] Introduce support for QCS8300 SoC based IQ8 Series Platform Balaji Selvanathan
  • [PATCH v3 1/6] doc: board: qualcomm: document Dragonwing board building/flashing Balaji Selvanathan
  • Re: [PATCH v3 1/6] doc: board: qualcomm: document Dragonwing board building/flashing Casey Connolly
  • Re: [PATCH v3 1/6] doc: board: qualcomm: document Dragonwing board building/flashing Balaji Selvanathan
  • [PATCH v3 2/6] dts: qcs8300-ride-u-boot.dtsi: Add memory entry to bootup Balaji Selvanathan
  • [PATCH v3 3/6] clk/qcom: qcs8300: Add GCC clock driver for QCS8300 Balaji Selvanathan
  • [PATCH v3 6/6] configs: add qcs8300_defconfig Balaji Selvanathan
  • Re: [PATCH v3 6/6] configs: add qcs8300_defconfig Casey Connolly
  • [PATCH v3 5/6] qcom_defconfig: Enable QCS8300 clock driver Balaji Selvanathan
  • [PATCH v3 4/6] phy: qcom: Enable QMP UFS PHY driver for QCS8300 Balaji Selvanathan
• Please pull net-20250520 Jerome Forissier
  • Re: Please pull net-20250520 Tom Rini
• QEMU & KVM broken for arm64 Ilias Apalodimas
  • Re: QEMU & KVM broken for arm64 Ilias Apalodimas
  • Re: QEMU & KVM broken for arm64 Mikko Rapeli
  • Re: QEMU & KVM broken for arm64 Mark Kettenis
  • Re: QEMU & KVM broken for arm64 Ilias Apalodimas
  • Re: QEMU & KVM broken for arm64 Simon Glass
  • Re: QEMU & KVM broken for arm64 Simon Glass
• Re: [PATCH 0/3] Add support for eCAP PWM and LCD pin mux Sukrut Bellary
• [PATCH v1] arm: mach-k3: j784s4: Call do_board_detect() before DDR probing Emanuele Ghidoli
  • Re: [PATCH v1] arm: mach-k3: j784s4: Call do_board_detect() before DDR probing Tom Rini
• [PATCH v2 0/5] Introduce support for QCS615 SoC based Platform Aswin Murugan
  • [PATCH v2 2/5] phy: qcom: Enable QMP UFS PHY driver for QCS615 Aswin Murugan
  • [PATCH v2 3/5] clk/qcom: qcs615: Add GCC clock driver for QCS615 Aswin Murugan
  • Re: [PATCH v2 3/5] clk/qcom: qcs615: Add GCC clock driver for QCS615 Casey Connolly
  • [PATCH v2 4/5] qcom_defconfig: Enable QCS615 clock driver Aswin Murugan
  • [PATCH v2 5/5] configs: add qcs615_defconfig Aswin Murugan
  • [PATCH v2 1/5] dts: qcs615-ride-u-boot.dtsi: Add memory entry to bootup Aswin Murugan
  • Re: [PATCH v2 0/5] Introduce support for QCS615 SoC based Platform Casey Connolly
  • Re: [PATCH v2 0/5] Introduce support for QCS615 SoC based Platform Tom Rini
  • Re: [PATCH v2 0/5] Introduce support for QCS615 SoC based Platform Casey Connolly
  • Re: [PATCH v2 0/5] Introduce support for QCS615 SoC based Platform Casey Connolly
• [PATCH 0/1] fs: fs_devread should log error when read outside partition Tony Dinh
  • [PATCH 1/1] fs: fs_devread should log error when read outside partition Tony Dinh
  • Re: [PATCH 1/1] fs: fs_devread should log error when read outside partition Tom Rini
• [PATCH] mmc: am654_sdhci: Clear UHS_MODE_SELECT when < MMC_HS_52 Judith Mendez
  • RE: [PATCH] mmc: am654_sdhci: Clear UHS_MODE_SELECT when < MMC_HS_52 Peng Fan
  • Re: [PATCH] mmc: am654_sdhci: Clear UHS_MODE_SELECT when < MMC_HS_52 Judith Mendez
• [PATCH v2] bootm: Fix bmi->images pointer not initialized in some cases Benjamin ROBIN
  • Re: [PATCH v2] bootm: Fix bmi->images pointer not initialized in some cases Tom Rini
  • Re: [PATCH v2] bootm: Fix bmi->images pointer not initialized in some cases Simon Glass
  • Re: [PATCH v2] bootm: Fix bmi->images pointer not initialized in some cases Tom Rini
  • Re: [PATCH v2] bootm: Fix bmi->images pointer not initialized in some cases Simon Glass
  • Re: [PATCH v2] bootm: Fix bmi->images pointer not initialized in some cases Tom Rini
• [PATCH] dtc: Add Kconfig option to pad device tree blob Eric Schikschneit
  • Re: [PATCH] dtc: Add Kconfig option to pad device tree blob Tom Rini
  • Re: [PATCH] dtc: Add Kconfig option to pad device tree blob Eric Schikschneit
  • Re: [PATCH] dtc: Add Kconfig option to pad device tree blob Tom Rini
  • [PATCH] dtc: Add Kconfig option to pad device tree blob Eric Schikschneit
  • Re: [PATCH] dtc: Add Kconfig option to pad device tree blob Anshul Dalal
  • Re: [PATCH] dtc: Add Kconfig option to pad device tree blob Tom Rini
• [PATCH v2 1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table Dario Binacchi
  • [PATCH v2 3/4] board: bsh: imx6ulz_smm_m2: Add support for 512 MiB DRAM Dario Binacchi
  • [PATCH v2 4/4] board: bsh: imx6ulz_smm_m2: Add delay between DRAM read access Dario Binacchi
  • [PATCH v2 2/4] board: bsh: imx6ulz_smm_m2: Add support for 256 MiB DRAM Dario Binacchi
  • Re: [PATCH v2 1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table Michael Nazzareno Trimarchi
• [PATCH v3 0/5] Restore imx8mn_bsh_smm_s2 properly booting Dario Binacchi
  • [PATCH v3 1/5] spl: Kconfig: support U-Boot load from raw NAND Dario Binacchi
  • [PATCH v3 2/5] imx: spl_imx_romapi: support raw NAND sector Dario Binacchi
  • [PATCH v3 4/5] board: bsh: imx8mn_bsh_smm_s2/s2pro: enlarge CONFIG_SPL_SYS_MALLOC_F_LEN Dario Binacchi
  • Re: [PATCH v3 4/5] board: bsh: imx8mn_bsh_smm_s2/s2pro: enlarge CONFIG_SPL_SYS_MALLOC_F_LEN Fabio Estevam
  • Re: [PATCH v3 4/5] board: bsh: imx8mn_bsh_smm_s2/s2pro: enlarge CONFIG_SPL_SYS_MALLOC_F_LEN Hugo Villeneuve
  • [PATCH v3 5/5] board: bsh: imx8mn_bsh_smm_s2/s2pro: let clock system enable UART clock Dario Binacchi
  • [PATCH v3 3/5] configs: imx8mn_bsh_smm_s2: load U-Boot from raw NAND Dario Binacchi
  • Re: [PATCH v3 0/5] Restore imx8mn_bsh_smm_s2 properly booting Fabio Estevam
• [PATCH 0/4] A series of patch for enable sc7180 android boot George Chan via B4 Relay
  • [PATCH 2/4] iommu: qcom-smmu: Introduce sc7180 compatible string George Chan via B4 Relay
  • Re: [PATCH 2/4] iommu: qcom-smmu: Introduce sc7180 compatible string Casey Connolly
  • [PATCH 3/4] boot: bootmeth_android: Conditionally dependent on abootimg George Chan via B4 Relay
  • Re: [PATCH 3/4] boot: bootmeth_android: Conditionally dependent on abootimg Tom Rini
  • [PATCH 1/4] image-android: Prepend/postpend default bootargs value with given bootcmd George Chan via B4 Relay
  • Re: [PATCH 1/4] image-android: Prepend/postpend default bootargs value with given bootcmd Tom Rini
  • [PATCH 4/4] usb: gadget: Introduce usb gadget vendor/product default id for ARCH_QCOM George Chan via B4 Relay
  • Re: [PATCH 4/4] usb: gadget: Introduce usb gadget vendor/product default id for ARCH_QCOM Neil Armstrong
  • Re: [PATCH 4/4] usb: gadget: Introduce usb gadget vendor/product default id for ARCH_QCOM Casey Connolly
• [GIT PULL] Please pull mmc-2025-05-20 Peng Fan
  • Re: [GIT PULL] Please pull mmc-2025-05-20 Tom Rini
• Re: [PATCH] mmc: cv1800b: Fix build without MMC_SUPPORTS_TUNING Peng Fan (OSS)
• [PATCH v2 2/4] tools: mkimage: validate image references in FIT configurations Aristo Chen
• [PATCH v2 0/4] mkimage: validate image references in FIT configurations Aristo Chen
• [PATCH v2 4/4] test: py: add mkimage test for undefined image references in FIT configs Aristo Chen
• [PATCH v2 1/4] tools: mkimage: propagate error codes from fit_handle_file() Aristo Chen
• [PATCH v2] caam: bugfix CAAM error on startup Olaf Baehring
  • Re: [PATCH v2] caam: bugfix CAAM error on startup Fabio Estevam
  • Re: [PATCH v2] caam: bugfix CAAM error on startup Tim Harvey
  • Re: [PATCH v2] caam: bugfix CAAM error on startup Fabio Estevam
  • Re: [PATCH v2] caam: bugfix CAAM error on startup Fabio Estevam
  • Re: [PATCH v2] caam: bugfix CAAM error on startup Tim Harvey
• [PATCH v2 3/4] binman: test: Ensure all config references exist in /images node Aristo Chen
• [PATCH v2 0/5] lmb: use a single API for all allocations Sughosh Ganu
  • [PATCH v2 1/5] lmb: replace lmb_reserve() and lmb_alloc_addr() API's Sughosh Ganu
  • Re: [PATCH v2 1/5] lmb: replace lmb_reserve() and lmb_alloc_addr() API's Ilias Apalodimas
  • Re: [PATCH v2 1/5] lmb: replace lmb_reserve() and lmb_alloc_addr() API's Sughosh Ganu
  • Re: [PATCH v2 1/5] lmb: replace lmb_reserve() and lmb_alloc_addr() API's Sughosh Ganu
  • [PATCH v2 2/5] lmb: replace the lmb_alloc() and lmb_alloc_base() API's Sughosh Ganu
  • [PATCH v2 3/5] lmb: staticise lmb_add_memory() Sughosh Ganu
  • [PATCH v2 5/5] doc: add lmb documentation Sughosh Ganu
  • [PATCH v2 4/5] lmb: use a single function to free up memory Sughosh Ganu
  • Re: [PATCH v2 4/5] lmb: use a single function to free up memory Ilias Apalodimas
• Re: [PATCH RFT v3 0/3] fastboot: add support for generic block flashing Mattijs Korpershoek
  • Re: [PATCH RFT v3 0/3] fastboot: add support for generic block flashing Mattijs Korpershoek
  • Re: [PATCH RFT v3 0/3] fastboot: add support for generic block flashing Tom Rini
  • Re: [PATCH RFT v3 0/3] fastboot: add support for generic block flashing Mattijs Korpershoek
  • Re: [PATCH RFT v3 0/3] fastboot: add support for generic block flashing Tom Rini
  • Re: [PATCH RFT v3 0/3] fastboot: add support for generic block flashing Mattijs Korpershoek
  • Re: [PATCH RFT v3 0/3] fastboot: add support for generic block flashing neil . armstrong
  • Re: [PATCH RFT v3 0/3] fastboot: add support for generic block flashing Tom Rini
• Re: [PATCH 2/4] board: bsh: imx6ulz_smm_m2: Add support for 256 MiB DRAM Fabio Estevam
• Re: [PATCH 1/4] board: bsh: imx6ulz_smm_m2: Match SPL DDR settings to DCD table Fabio Estevam
• [PATCH v5 0/6] Rockchip: Allow to silent TPL/SPL debug console Lukasz Czechowski
  • [PATCH v5 3/6] ram: rockchip: Fix dependency of RAM_ROCKCHIP_DEBUG Lukasz Czechowski
  • [PATCH v5 5/6] rockchip: px30: Weaken dependency TPL/SPL serial Lukasz Czechowski
  • [PATCH v5 4/6] debug_uart: Replace debug functions with dummies if CONFIG_DEBUG_UART is not set Lukasz Czechowski
  • Re: [PATCH v5 4/6] debug_uart: Replace debug functions with dummies if CONFIG_DEBUG_UART is not set Kever Yang
  • [PATCH v5 1/6] arm: uniphier: Change _debug_uart_putc function to inline Lukasz Czechowski
  • Re: [PATCH v5 1/6] arm: uniphier: Change _debug_uart_putc function to inline Tom Rini
  • Re: [PATCH v5 1/6] arm: uniphier: Change _debug_uart_putc function to inline Kever Yang
  • [PATCH v5 6/6] rockchip: px30: Fix hard dependency to DEBUG_UART_BOARD_INIT Lukasz Czechowski
  • [PATCH v5 2/6] efi: stub: Change _debug_uart_putc function to inline Lukasz Czechowski
  • Re: [PATCH v5 2/6] efi: stub: Change _debug_uart_putc function to inline Tom Rini
  • Re: [PATCH v5 2/6] efi: stub: Change _debug_uart_putc function to inline Kever Yang
• [PATCH v1] linux/sizes.h: sync from kernel Emanuele Ghidoli
  • Re: [PATCH v1] linux/sizes.h: sync from kernel Tom Rini
  • Re: [PATCH v1] linux/sizes.h: sync from kernel 高惟杰
  • Re: [PATCH v1] linux/sizes.h: sync from kernel Tom Rini
• [PATCH] board: freescale: imx8mn_evk: let clock system enable UART clock Dario Binacchi
  • Re: [PATCH] board: freescale: imx8mn_evk: let clock system enable UART clock Fabio Estevam

• Earlier messages
• Later messages