Hi Vipin,
Sorry for weighing in so late on this...
On 5/6/2010 4:18 AM, Vipin KUMAR wrote:
> Signed-off-by: Vipin Kumar<vipin.ku...@st.com>
> ---
> arch/arm/include/asm/arch-spear/hardware.h | 1 +
> board/spear/spear300/spear300.c | 10 ++++++++++
> board/spear/spear310/spear310.c | 10 ++++++++++
> board/spear/spear320/spear320.c | 10 ++++++++++
> board/spear/spear600/spear600.c | 10 ++++++++++
> include/configs/spear-common.h | 14 ++++++++++++--
> include/configs/spear3xx.h | 3 +++
> 7 files changed, 56 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-spear/hardware.h
> b/arch/arm/include/asm/arch-spear/hardware.h
> index 818f36c..39d64b6 100644
> --- a/arch/arm/include/asm/arch-spear/hardware.h
> +++ b/arch/arm/include/asm/arch-spear/hardware.h
> @@ -31,6 +31,7 @@
> #define CONFIG_SPEAR_SYSCNTLBASE (0xFCA00000)
> #define CONFIG_SPEAR_TIMERBASE (0xFC800000)
> #define CONFIG_SPEAR_MISCBASE (0xFCA80000)
> +#define CONFIG_SPEAR_ETHBASE (0xE0800000)
>
> #define CONFIG_SYS_NAND_CLE (1<< 16)
> #define CONFIG_SYS_NAND_ALE (1<< 17)
> diff --git a/board/spear/spear300/spear300.c b/board/spear/spear300/spear300.c
> index 60ee544..774f466 100644
> --- a/board/spear/spear300/spear300.c
> +++ b/board/spear/spear300/spear300.c
> @@ -22,6 +22,7 @@
> */
>
> #include<common.h>
> +#include<netdev.h>
> #include<nand.h>
> #include<asm/io.h>
> #include<asm/arch/hardware.h>
> @@ -56,3 +57,12 @@ int board_nand_init(struct nand_chip *nand)
>
> return -1;
> }
> +
> +int board_eth_init(bd_t *bis)
> +{
> +#if defined(CONFIG_DESIGNWARE_ETH)
> + return designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY);
> +#else
> + return -1;
> +#endif
> +}
>
Returning -1 isn't really the right thing to do here. I apologize that
this is really confusing, and needs to be cleaned up. Next release - I
promise. If you want to call cpu_eth_init() here, call it directly.
Otherwise, return the number of devices found (0 or more). If there's
an error in designware_initialize(), you should handle it here, either
by asserting, printing a failure banner, etc.
The original intent in net/eth.c was something like this:
/* Try board-specific initialization first. If it fails or isn't
* present, try the cpu-specific initialization */
if (board_eth_init(bis) *is weak* )
cpu_eth_init(bis);
but the easiest way to check for weakness was to return -1. This is of
course an inappropriate number to use since it's the almost-universal
return code for failure.
Again, sorry for bringing this up after so many of your iterations.
regards,
Ben
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
