On 29.03.19 11:04, eugen.hris...@microchip.com wrote:
On 26.03.2019 14:16, Stefan Roese wrote:
This patch adds the CONFIG_SPL_IMAGE option to select the SPL image that
shall be used to generate the combined SPL + U-Boot image. The default
value is the current value "spl/u-boot-spl.bin". >
This patch also sets CONFIG_SPL_IMAGE to "spl/boot.bin" for AT91 targets
which use SPL NAND support (boot from NAND).
Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Heiko Schocher <h...@denx.de>
Cc: Andreas Bießmann <andr...@biessmann.org>
Cc: Eugen Hristev <eugen.hris...@microchip.com>
---
v2:
- No change
Kconfig | 10 ++++++++++
Makefile | 4 +++-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/Kconfig b/Kconfig
index 305b265ed7..7c2b86f1f3 100644
--- a/Kconfig
+++ b/Kconfig
@@ -224,6 +224,15 @@ config BUILD_ROM
which are not shipped in the U-Boot source tree.
Please, see doc/README.x86 for details.
+config SPL_IMAGE
+ string "SPL image filename that is generated"
+ default "spl/boot.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+ default "spl/u-boot-spl.bin"
Hi Stefan,
This means that the old spl/u-boot-spl.bin is gone for AT91 and NAND ?
Please correct me if I am wrong
No, its still there.
+ help
+ The SPL image filename that is generated by the build process.
+ This image might be used to generated a combined image with
+ SPL and main U-Boot proper as well.
+
config BUILD_TARGET
string "Build target special images"
default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_ARRIA10
@@ -232,6 +241,7 @@ config BUILD_TARGET
default "u-boot-elf.srec" if RCAR_GEN3
default "u-boot.itb" if SPL_LOAD_FIT && ARCH_SUNXI
default "u-boot.kwb" if KIRKWOOD
+ default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
This means that before this patch, there was no special target for AT91
?
Yes.
Thus no special image was built ?
Yes.
And after this patch, there will
also be a new binary u-boot-with-spl.bin, except spl/boot.bin and
spl/u-boot-spl.bin ?
The old binaries are still generated. Only a new combined image is
generated too.
Thus your patch does a bit more than what it's explained in the commit
message ?
Does it? What exactly is missing in the commit message? Please explain
and I'll add something in the next patch version.
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
