Hello Stefan,
Am 26.03.2019 um 13:16 schrieb Stefan Roese:
This patch adds a call to spl_early_init() to board_init_f() which is
needed when CONFIG_SPL_OF_CONTROL is configured. This is necessary for
the early SPL setup including the DTB setup for later usage.
Please note that this call might also be needed for non SPL_OF_CONTROL
board, like the smartweb target. But smartweb fails to build with this
call because its binary grows too big. So I disabled it for these kind
of targets for now.
Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Heiko Schocher <h...@denx.de>
Cc: Andreas Bießmann <andr...@biessmann.org>
Cc: Eugen Hristev <eugen.hris...@microchip.com>
---
v2:
- No change
arch/arm/mach-at91/spl_at91.c | 10 ++++++++++
1 file changed, 10 insertions(+)
Reviewed-by: Heiko Schocher <h...@denx.de>
Tested on the taurus board:
Tested-by: Heiko Schocher <h...@denx.de>
Yes ... smartweb board ... The problem is, I have there only 4k
for SPL ... no chance for DM nor DTS ...
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: h...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
