Hello Stefan,
Am 26.03.2019 um 13:16 schrieb Stefan Roese:
This patch fixes the timer register setup in at91_wdt_start() to
correctly configure the register again. The input timeout value is
now in milli-seconds instead of seconds with the new watchdog API.
Make sure to take this into account and only use a max timeout
value of 16 seconds as appropriate for this SoC.
Also the check against a lower timeout value than 0 is removed. This
check makes no sense, as the timeout value is unsigned.
Signed-off-by: Stefan Roese <s...@denx.de>
Reported-by: Heiko Schocher <h...@denx.de>
Cc: Heiko Schocher <h...@denx.de>
Cc: Andreas Bießmann <andr...@biessmann.org>
Cc: Eugen Hristev <eugen.hris...@microchip.com>
---
v2:
- No change
drivers/watchdog/at91sam9_wdt.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
Thanks!
Reviewed-by: Heiko Schocher <h...@denx.de>
Tested on the taurus board:
Tested-by: Heiko Schocher <h...@denx.de>
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: h...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
